'use strict';

goog.provide('Blockly.Msg.zh.hant');

goog.require('Blockly.Msg');


Blockly.Msg.MICROBIT_MU_INIT_HELPURL = '';
Blockly.Msg.MICROBIT_MU_INIT_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_INIT_MESSAGE0 = '初始化 MU 視覺傳感器 地址 %1';

Blockly.Msg.MICROBIT_MU_BEGIN_HELPURL = '';
Blockly.Msg.MICROBIT_MU_BEGIN_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_BEGIN_MESSAGE0 = '開啟算法 %1';

Blockly.Msg.MICROBIT_MU_VISION_TYPE_MESSAGE0 = '%1 顏色檢測 %2 顏色識別 %3 %4 球體檢測 %5 人體檢測 %6 %7 形狀卡片檢測 %8 交通卡片檢測 %9 %10 數字卡片檢測 %11 開啟所有算法';

Blockly.Msg.MICROBIT_MU_VISION_COLOR_DETECT = '顏色檢測';
Blockly.Msg.MICROBIT_MU_VISION_COLOR_RECOGNITION = '顏色識別';
Blockly.Msg.MICROBIT_MU_VISION_BALL_DETECT = '球體檢測';
Blockly.Msg.MICROBIT_MU_VISION_BODY_DETECT = '人體檢測';
Blockly.Msg.MICROBIT_MU_VISION_SHAPE_CARD_DETECT = '形狀卡片檢測';
Blockly.Msg.MICROBIT_MU_VISION_TRAFFIC_CARD_DETECT = '交通卡片檢測';
Blockly.Msg.MICROBIT_MU_VISION_NUM_CARD_DETECT = '數字卡片檢測';
Blockly.Msg.MICROBIT_MU_VISION_ALL = '開啟所有算法';

Blockly.Msg.MICROBIT_MU_LEVEL_DEFAULT = '默認';
Blockly.Msg.MICROBIT_MU_LEVEL_SPEED = '速度優先';
Blockly.Msg.MICROBIT_MU_LEVEL_BALANCE = '平衡';
Blockly.Msg.MICROBIT_MU_LEVEL_ACCURACY = '準確性優先';

Blockly.Msg.MICROBIT_MU_SET_LEVEL_HELPURL = '';
Blockly.Msg.MICROBIT_MU_SET_LEVEL_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_SET_LEVEL_MESSAGE0 = '設置算法性能 %1 為 %2';

Blockly.Msg.MICROBIT_MU_GET_LEVEL_HELPURL = '';
Blockly.Msg.MICROBIT_MU_GET_LEVEL_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_GET_LEVEL_MESSAGE0 = '獲取算法性能 %1';

Blockly.Msg.MICROBIT_MU_FPS_NORMAL = '正常模式';
Blockly.Msg.MICROBIT_MU_FPS_HIGH = '高幀率模式';

Blockly.Msg.MICROBIT_MU_SET_FPS_MODE_MESSAGE0 = '設置攝像頭幀率模式為 %1';
Blockly.Msg.MICROBIT_MU_SET_FPS_MODE_TOOLTIP = '高幀率模式下，識別速度增加，同時功耗增加';
Blockly.Msg.MICROBIT_MU_SET_FPS_MODE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_GET_FPS_MODE_MESSAGE0 = '獲取攝像頭幀率模式';
Blockly.Msg.MICROBIT_MU_GET_FPS_MODE_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_GET_FPS_MODE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_AUTO_WHITE_BALANCE = '自動白平衡';
Blockly.Msg.MICROBIT_MU_LOCK_WHITE_BALANCE = '鎖定白平衡';
Blockly.Msg.MICROBIT_MU_WHITE_LIGHT = '白光模式';
Blockly.Msg.MICROBIT_MU_YELLOW_LIGHT = '黃光模式';

Blockly.Msg.MICROBIT_MU_SET_AWB_MODE_MESSAGE0 = '設置攝像頭白平衡模式為 %1';
Blockly.Msg.MICROBIT_MU_SET_AWB_MODE_TOOLTIP = '調節因為外界光源變化而引起的圖像偏色';
Blockly.Msg.MICROBIT_MU_SET_AWB_MODE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_GET_AWB_MODE_MESSAGE0 = '獲取攝像頭白平衡模式';
Blockly.Msg.MICROBIT_MU_GET_AWB_MODE_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_GET_AWB_MODE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_ZOOM_DEFAULT = '默認';
Blockly.Msg.MICROBIT_MU_ZOOM_1 = '變焦模式1';
Blockly.Msg.MICROBIT_MU_ZOOM_2 = '變焦模式2';
Blockly.Msg.MICROBIT_MU_ZOOM_3 = '變焦模式3';
Blockly.Msg.MICROBIT_MU_ZOOM_4 = '變焦模式4';
Blockly.Msg.MICROBIT_MU_ZOOM_5 = '變焦模式5';

Blockly.Msg.MICROBIT_MU_SET_ZOOM_MODE_MESSAGE0 = '設置攝像頭變焦模式為 %1';
Blockly.Msg.MICROBIT_MU_SET_ZOOM_MODE_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_SET_ZOOM_MODE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_GET_ZOOM_MODE_MESSAGE0 = '獲取攝像頭變焦模式';
Blockly.Msg.MICROBIT_MU_GET_ZOOM_MODE_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_GET_ZOOM_MODE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_SET_DEFAULT_MESSAGE0 = '恢復傳感器默認設置';
Blockly.Msg.MICROBIT_MU_SET_DEFAULT_TOOLTIP = '關閉所有算法，重置所有硬件設置';
Blockly.Msg.MICROBIT_MU_SET_DEFAULT_HELPURL = '';

Blockly.Msg.MICROBIT_MU_RESTART_MESSAGE0 = '重啟傳感器';
Blockly.Msg.MICROBIT_MU_RESTART_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_RESTART_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LED_CLOSE = 'LED關';
Blockly.Msg.MICROBIT_MU_LED_RED = '紅色';
Blockly.Msg.MICROBIT_MU_LED_GREEN = '綠色';
Blockly.Msg.MICROBIT_MU_LED_YELLOW = '黃色';
Blockly.Msg.MICROBIT_MU_LED_BLUE = '藍色';
Blockly.Msg.MICROBIT_MU_LED_PURPLE = '紫色';
Blockly.Msg.MICROBIT_MU_LED_CYAN = '青色';
Blockly.Msg.MICROBIT_MU_LED_WHITE = '白色';

Blockly.Msg.MICROBIT_MU_LED_SET_COLOR_MESSAGE0 = '設置 %1 亮度 %2 檢測到結果時的顏色為 %3 %4 未檢測到結果時的顏色為 %5';
Blockly.Msg.MICROBIT_MU_LED_SET_COLOR_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LED_SET_COLOR_HELPURL = '';

Blockly.Msg.MICROBIT_MU_VALUE_STATUS = '檢測狀態';
Blockly.Msg.MICROBIT_MU_VALUE_XVALUE = '目標的橫向坐標';
Blockly.Msg.MICROBIT_MU_VALUE_YVALUE = '目標的縱向坐標';
Blockly.Msg.MICROBIT_MU_VALUE_WIDTHVALUE = '目標的寬度';
Blockly.Msg.MICROBIT_MU_VALUE_HEIGHTVALUE = '目標的高度';
Blockly.Msg.MICROBIT_MU_VALUE_LABEL = '目標的標簽';
Blockly.Msg.MICROBIT_MU_VALUE_RVALUE = '紅色通道值（顏色識別模式）';
Blockly.Msg.MICROBIT_MU_VALUE_GVALUE = '綠色通道值（顏色識別模式）';
Blockly.Msg.MICROBIT_MU_VALUE_BVALUE = '藍色通道值（顏色識別模式）';

Blockly.Msg.MICROBIT_MU_GET_VALUE_MESSAGE0 = '獲取 %1 識別結果 %2';
Blockly.Msg.MICROBIT_MU_GET_VALUE_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_GET_VALUE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_PROXIMITY_ENABLE = '接近檢測';
Blockly.Msg.MICROBIT_MU_LS_AMBIENT_LIGHT_ENABLE = '環境光檢測';
Blockly.Msg.MICROBIT_MU_LS_COLOR_ENABLE = '顏色檢測';
Blockly.Msg.MICROBIT_MU_LS_GESTURE_ENABLE = '手勢檢測';

Blockly.Msg.MICROBIT_MU_LS_BEGIN_MESSAGE0 = '開啟光線傳感器 %1 功能';
Blockly.Msg.MICROBIT_MU_LS_BEGIN_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_BEGIN_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_END_MESSAGE0 = '關閉光線傳感器 %1 功能';
Blockly.Msg.MICROBIT_MU_LS_END_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_END_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_SENSITIVITY_DEFAULT = '默認靈敏度';
Blockly.Msg.MICROBIT_MU_LS_SENSITIVITY_1 = '靈敏度1';
Blockly.Msg.MICROBIT_MU_LS_SENSITIVITY_2 = '靈敏度2';
Blockly.Msg.MICROBIT_MU_LS_SENSITIVITY_3 = '靈敏度3';

Blockly.Msg.MICROBIT_MU_LS_SET_SENSITIVITY_MESSAGE0 = '設置光線傳感器靈敏度為 %1';
Blockly.Msg.MICROBIT_MU_LS_SET_SENSITIVITY_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_SET_SENSITIVITY_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_WB_ENABLE_MESSAGE0 = '光線傳感器校準白平衡';
Blockly.Msg.MICROBIT_MU_LS_WB_ENABLE_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_WB_ENABLE_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_READ_PROXIMITY_MESSAGE0 = '讀取接近檢測數值';
Blockly.Msg.MICROBIT_MU_LS_READ_PROXIMITY_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_READ_PROXIMITY_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_READ_AMBIENT_LIGHT_MESSAGE0 = '讀取環境光檢測數值';
Blockly.Msg.MICROBIT_MU_LS_READ_AMBIENT_LIGHT_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_READ_AMBIENT_LIGHT_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_COLOR_LABEL = '標簽值';//'LsColorLabel';
Blockly.Msg.MICROBIT_MU_LS_COLOR_RED = '紅色通道校正值';//'LsColorRed';
Blockly.Msg.MICROBIT_MU_LS_COLOR_GREEN = '綠色通道校正值';//'LsColorGreen';
Blockly.Msg.MICROBIT_MU_LS_COLOR_BLUE = '藍色通道校正值';//'LsColorBlue';
Blockly.Msg.MICROBIT_MU_LS_COLOR_HUE = '色調值（0～360）';//'LsColorHue';
Blockly.Msg.MICROBIT_MU_LS_COLOR_SATURATION = '飽和度';//'LsColorSaturation';
Blockly.Msg.MICROBIT_MU_LS_COLOR_VALUE = '亮度';//'LsColorValue';

Blockly.Msg.MICROBIT_MU_LS_RAW_COLOR_RED = '紅色通道原始值';//'LsRawColorRed';
Blockly.Msg.MICROBIT_MU_LS_RAW_COLOR_GREEN = '綠色通道原始值';//'LsRawColorGreen';
Blockly.Msg.MICROBIT_MU_LS_RAW_COLOR_BLUE = '藍色通道原始值';//'LsRawColorBlue';

Blockly.Msg.MICROBIT_MU_LS_READ_COLOR_MESSAGE0 = '讀取顏色檢測結果的 %1';
Blockly.Msg.MICROBIT_MU_LS_READ_COLOR_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_READ_COLOR_HELPURL = '';

Blockly.Msg.MICROBIT_MU_LS_READ_GESTURE_MESSAGE0 = '讀取手勢檢測結果';
Blockly.Msg.MICROBIT_MU_LS_READ_GESTURE_TOOLTIP = '';
Blockly.Msg.MICROBIT_MU_LS_READ_GESTURE_HELPURL = '';


Blockly.Msg.CocoRobo_CUSTOM_CODE_HELPURL = '';
Blockly.Msg.CocoRobo_CUSTOM_CODE_TOOLTIP = '';
Blockly.Msg.CocoRobo_CUSTOM_CODE_MESSAGE0 = '%1 自定義代碼 %2 %3';

Blockly.Msg.CocoRobo_CUSTOM_TYPE_IMPORT = '置頂';
Blockly.Msg.CocoRobo_CUSTOM_TYPE_NORMAL = '普通';

Blockly.Msg.CocoRobo_PRINT_TO_CHART_TOOLTIP = "";
Blockly.Msg.CocoRobo_PRINT_TO_CHART_EMPTY_TITLE = "打印數據到圖表";
Blockly.Msg.CocoRobo_PRINT_TO_CHART_INPUT_WITH = "打印數據到圖表";
Blockly.Msg.CocoRobo_PRINT_TO_CHART_ITEM_TITLE = "數據";
Blockly.Msg.CocoRobo_PRINT_TO_CHART_ITEM_TOOLTIP = "";
Blockly.Msg.CocoRobo_PRINT_TO_CHART_CONTAINER_TITLE_ADD = "數據內容";
Blockly.Msg.CocoRobo_PRINT_TO_CHART_CONTAINER_TOOLTIP = "";

Blockly.Msg.CocoRobo_INIT_CHART_TOOLTIP = "";
Blockly.Msg.CocoRobo_INIT_CHART_EMPTY_TITLE = "初始化圖表列標題";
Blockly.Msg.CocoRobo_INIT_CHART_INPUT_WITH = "初始化圖表列標題";
Blockly.Msg.CocoRobo_INIT_CHART_ITEM_TITLE = "標題";
Blockly.Msg.CocoRobo_INIT_CHART_ITEM_TOOLTIP = "";
Blockly.Msg.CocoRobo_INIT_CHART_CONTAINER_TITLE_ADD = "數據列標題";
Blockly.Msg.CocoRobo_INIT_CHART_CONTAINER_TOOLTIP = "";

Blockly.Msg.MICROBIT_UPDATE_MSG_ARGS_HELPURL = '';
Blockly.Msg.MICROBIT_UPDATE_MSG_ARGS_MESSAGE0 = '刷新  遙控botbit的消息 %1 消息參數 %2 x %3 y %4 z %5 控制左臂 %6 控制右臂 %7';
Blockly.Msg.MICROBIT_UPDATE_MSG_ARGS_TOOLTIP = "";

Blockly.Msg.BOTBIT_REC_FROM_MICROBIT_HELPURL = '';
Blockly.Msg.BOTBIT_REC_FROM_MICROBIT_MESSAGE0 = 'botbit 接收並執行';
Blockly.Msg.BOTBIT_REC_FROM_MICROBIT_TOOLTIP = "";

Blockly.Msg.GAMEBIT_BUTTON_HELPURL = '';
Blockly.Msg.GAMEBIT_BUTTON_MESSAGE0 = '按下 %1';
Blockly.Msg.GAMEBIT_BUTTON_TOOLTIP = "";

Blockly.Msg.GAMEBIT_SHAKE_HELPURL = '';
Blockly.Msg.GAMEBIT_SHAKE_MESSAGE0 = '震動 %1';
Blockly.Msg.GAMEBIT_SHAKE_TOOLTIP = "";

Blockly.Msg.GAMEBIT_XY_HELPURL = '';
Blockly.Msg.GAMEBIT_XY_MESSAGE0 = '%1 軸  偏移值';
Blockly.Msg.GAMEBIT_XY_TOOLTIP = "";

Blockly.Msg.BOTBIT_JUMP_HELPURL = '';
Blockly.Msg.BOTBIT_JUMP_MESSAGE0 = '舞步(jump)  單步時間 %1 毫秒';
Blockly.Msg.BOTBIT_JUMP_TOOLTIP = "單位毫秒";
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_X_MESSAGE0 = '加速度計 X 軸';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_X_TOOLTIP = '獲取加速度傳感器 X 軸參數。';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_X_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/accelerometer.html#microbit.accelerometer.get_x';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_Y_MESSAGE0 = '加速度計 Y 軸';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_Y_TOOLTIP = '獲取加速度傳感器 Y 軸參數。';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_Y_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/accelerometer.html#microbit.accelerometer.get_y';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_Z_MESSAGE0 = '加速度計 Z 軸';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_Z_TOOLTIP = '獲取加速度傳感器 Z 軸參數。';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_Z_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/accelerometer.html#microbit.accelerometer.get_z';
Blockly.Msg.MICROBIT_ACCELEROMETER_WAS_GESTURE_MESSAGE0 = '發生過手勢 %1';
Blockly.Msg.MICROBIT_ACCELEROMETER_WAS_GESTURE_TOOLTIP = '通過返回 “真” 或者 “假” 提示自從上次檢查後是否發生過指定的手勢。';
Blockly.Msg.MICROBIT_ACCELEROMETER_WAS_GESTURE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/accelerometer.html#microbit.accelerometer.was_gesture';
Blockly.Msg.MICROBIT_ACCELEROMETER_IS_GESTURE_MESSAGE0 = '發生手勢 %1';
Blockly.Msg.MICROBIT_ACCELEROMETER_IS_GESTURE_TOOLTIP = '通過返回 “真” 或者 “假” 表示自從現在發生指定的手勢。';
Blockly.Msg.MICROBIT_ACCELEROMETER_IS_GESTURE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/accelerometer.html#microbit.accelerometer.is_gesture';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_GESTURES_MESSAGE0 = '獲取手勢';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_GESTURES_TOOLTIP = '返回發生過的手勢，同時清除以前的手勢。';
Blockly.Msg.MICROBIT_ACCELEROMETER_GET_GESTURES_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/accelerometer.html#microbit.accelerometer.get_gestures';
Blockly.Msg.MICROBIT_ACCELEROMETER_CURRENT_GESTURE_MESSAGE0 = '當前手勢';
Blockly.Msg.MICROBIT_ACCELEROMETER_CURRENT_GESTURE_TOOLTIP = '返回當前手勢名稱。';
Blockly.Msg.MICROBIT_ACCELEROMETER_CURRENT_GESTURE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/accelerometer.html#microbit.accelerometer.current_gesture';
Blockly.Msg.MICROBIT_BUTTON_IS_PRESSED_MESSAGE0 = '按鍵 %1 已經按下';
Blockly.Msg.MICROBIT_BUTTON_IS_PRESSED_TOOLTIP = '如果指定按鍵按下返回 “真”，否則返回 “假”。';
Blockly.Msg.MICROBIT_BUTTON_IS_PRESSED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/button.html#Button.is_pressed';
Blockly.Msg.MICROBIT_BUTTON_WAS_PRESSED_MESSAGE0 = '按鍵 %1 曾經按下';
Blockly.Msg.MICROBIT_BUTTON_WAS_PRESSED_TOOLTIP = '如果按鍵曾經按下過返回 “真”，否則返回 “假”。';
Blockly.Msg.MICROBIT_BUTTON_WAS_PRESSED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/button.html#Button.was_pressed';
Blockly.Msg.MICROBIT_BUTTON_GET_PRESSES_MESSAGE0 = '按鍵 %1 按下過的次數';
Blockly.Msg.MICROBIT_BUTTON_GET_PRESSES_TOOLTIP = '返回按鍵按下的總次數，然後清除計數。';
Blockly.Msg.MICROBIT_BUTTON_GET_PRESSES_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/button.html#Button.get_presses';
Blockly.Msg.MICROBIT_COMPASS_CALIBRATE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/compass.html#microbit.compass.calibrate';
Blockly.Msg.MICROBIT_COMPASS_CALIBRATE_MESSAGE0 = '校正指南針';
Blockly.Msg.MICROBIT_COMPASS_CALIBRATE_TOOLTIP = '開始校正指南針，提高精度。';
Blockly.Msg.MICROBIT_COMPASS_IS_CALIBRATED_MESSAGE0 = '指南針已經校正';
Blockly.Msg.MICROBIT_COMPASS_IS_CALIBRATED_TOOLTIP = '如果指南針已經校正返回 “真”，否則返回 “假”。';
Blockly.Msg.MICROBIT_COMPASS_IS_CALIBRATED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/compass.html#microbit.compass.is_calibrated';
Blockly.Msg.MICROBIT_COMPASS_HEADING_MESSAGE0 = '指南針方向';
Blockly.Msg.MICROBIT_COMPASS_HEADING_TOOLTIP = '返回指南針的數值，0 - 360 度，順時針方向，正北方是 0。';
Blockly.Msg.MICROBIT_COMPASS_HEADING_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/compass.html#microbit.compass.heading';
Blockly.Msg.MICROBIT_COMPASS_GET_FIELD_STRENGTH_MESSAGE0 = '指南針磁場強度';
Blockly.Msg.MICROBIT_COMPASS_GET_FIELD_STRENGTH_TOOLTIP = '返回設備周圍磁場的強度。';
Blockly.Msg.MICROBIT_COMPASS_GET_FIELD_STRENGTH_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/compass.html#microbit.compass.get_field_strength';
Blockly.Msg.MICROBIT_COMPASS_X_MESSAGE0 = '磁力 X軸';
Blockly.Msg.MICROBIT_COMPASS_X_TOOLTIP = '返回X軸方向的磁力數值。';
Blockly.Msg.MICROBIT_COMPASS_X_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/compass.html#microbit.compass.get_x';
Blockly.Msg.MICROBIT_COMPASS_Y_MESSAGE0 = '磁力 Y軸';
Blockly.Msg.MICROBIT_COMPASS_Y_TOOLTIP = '返回Y軸方向的磁力數值。';
Blockly.Msg.MICROBIT_COMPASS_Y_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/compass.html#microbit.compass.get_y';
Blockly.Msg.MICROBIT_COMPASS_Z_MESSAGE0 = '磁力 Z軸';
Blockly.Msg.MICROBIT_COMPASS_Z_TOOLTIP = '返回Z軸方向的磁力數值。';
Blockly.Msg.MICROBIT_COMPASS_Z_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/compass.html#microbit.compass.get_z';
Blockly.Msg.MICROBIT_DISPLAY_GET_PIXEL_MESSAGE0 = '獲取第 %1 列 %2 行 位置的亮度';
Blockly.Msg.MICROBIT_DISPLAY_GET_PIXEL_TOOLTIP = '獲取第 X 列和 Y 行位置 LED 的亮度。 0 (不亮)，  9 (最亮)。';
Blockly.Msg.MICROBIT_DISPLAY_GET_PIXEL_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.get_pixel';
Blockly.Msg.MICROBIT_DISPLAY_SET_PIXEL_MESSAGE0 = '設置第 %1 列 %2 行 LED 的亮度到 %3';
Blockly.Msg.MICROBIT_DISPLAY_SET_PIXEL_TOOLTIP = '設置第 X 列 Y 行處 LED 的亮度。0 (不亮)，9 (最亮)。';
Blockly.Msg.MICROBIT_DISPLAY_SET_PIXEL_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.set_pixel';
Blockly.Msg.MICROBIT_DISPLAY_CLEAR_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.clear';
Blockly.Msg.MICROBIT_DISPLAY_CLEAR_MESSAGE0 = '清除顯示內容';
Blockly.Msg.MICROBIT_DISPLAY_CLEAR_TOOLTIP = '清除全部顯示的內容 - 設置所有 LED 亮度為 0 (不亮)。';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_IMAGE_MESSAGE0 = '顯示圖像/文本 %1';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_IMAGE_TOOLTIP = '顯示圖像或文本消息。';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_IMAGE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.show';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_IMAGE_WITH_BRI_MESSAGE0 = '以亮度 ( %1 / %2 ) 顯示圖像 %3';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_IMAGE_WITH_BRI_TOOLTIP = '以指定亮度顯示圖像。';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_ANIMATION_MESSAGE0 = '動畫顯示圖像 %1 延時 %2 毫秒。%3 等待 %4 %5 循環 %6 %7 清除 %8';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_ANIMATION_TOOLTIP = '動畫方式顯示圖像列表，每兩個圖像之間延時壹段時間。還可以設置等待模式、循環模式以及完成後清除屏幕。';
Blockly.Msg.MICROBIT_DISPLAY_SHOW_ANIMATION_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.show';
Blockly.Msg.MICROBIT_DISPLAY_SCROLL_MESSAGE0 = '滾動消息 %1';
Blockly.Msg.MICROBIT_DISPLAY_SCROLL_TOOLTIP = '滾動方式顯示文字。';
Blockly.Msg.MICROBIT_DISPLAY_SCROLL_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.scroll';
Blockly.Msg.MICROBIT_DISPLAY_SCROLL_ANIMATION_MESSAGE0 = '滾動消息 %1 延時 %2 毫秒。%3 等待 %4 %5 循環 %6 %7 等寬字體 %8';
Blockly.Msg.MICROBIT_DISPLAY_SCROLL_ANIMATION_TOOLTIP = '滾動方式顯示文字。還可以設置等待模式、循環模式以及字體等寬。';
Blockly.Msg.MICROBIT_DISPLAY_SCROLL_ANIMATION_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.scroll';
Blockly.Msg.MICROBIT_DISPLAY_ON_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.on';
Blockly.Msg.MICROBIT_DISPLAY_ON_MESSAGE0 = '打開屏幕';
Blockly.Msg.MICROBIT_DISPLAY_ON_TOOLTIP = '打開屏幕顯示。';
Blockly.Msg.MICROBIT_DISPLAY_OFF_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.off';
Blockly.Msg.MICROBIT_DISPLAY_OFF_MESSAGE0 = '關閉屏幕';
Blockly.Msg.MICROBIT_DISPLAY_OFF_TOOLTIP = '關閉屏幕顯示。';
Blockly.Msg.MICROBIT_DISPLAY_IS_ON_MESSAGE0 = '顯示已經打開';
Blockly.Msg.MICROBIT_DISPLAY_IS_ON_TOOLTIP = '屏幕已經打開就返回 “真”，否則返回 “假”';
Blockly.Msg.MICROBIT_DISPLAY_IS_ON_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/display.html#microbit.display.is_on';
Blockly.Msg.MICROBIT_IMAGE_BUILTINS_MESSAGE0 = '內置圖像 %1';
Blockly.Msg.MICROBIT_IMAGE_BUILTINS_TOOLTIP = '選擇一個內置的圖像。';
Blockly.Msg.MICROBIT_IMAGE_BUILTINS_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/image.html#attributes';
Blockly.Msg.MICROBIT_IMAGE_COPY_MESSAGE0 = '復制圖像 %1';
Blockly.Msg.MICROBIT_IMAGE_COPY_TOOLTIP = '創建參考圖像副本。';
Blockly.Msg.MICROBIT_IMAGE_COPY_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/image.html#microbit.Image.copy';
Blockly.Msg.MICROBIT_IMAGE_INVERT_MESSAGE0 = '反顯圖像 %1';
Blockly.Msg.MICROBIT_IMAGE_INVERT_TOOLTIP = '反顯圖像（負片效果）。';
Blockly.Msg.MICROBIT_IMAGE_INVERT_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/image.html#microbit.Image.invert';
Blockly.Msg.MICROBIT_IMAGE_CREATE_MESSAGE0 = '創建圖像 %1 %2 %3 %4 %5 %6 %7 %8 %9 %10 %11 %12 %13 %14 %15 %16 %17 %18 %19 %20 %21 %22 %23 %24 %25 %26 %27 %28 %29 %30';
Blockly.Msg.MICROBIT_IMAGE_CREATE_TOOLTIP = '創建新圖像。';
Blockly.Msg.MICROBIT_IMAGE_CREATE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/image.html#microbit.Image';
Blockly.Msg.MICROBIT_IMAGE_CREATE1_MESSAGE0 = '創建圖像 %1 首個行%2第二行%3第三行%4第四行%5第五行%6';
Blockly.Msg.MICROBIT_IMAGE_CREATE1_TOOLTIP = '創建新圖像。';
Blockly.Msg.MICROBIT_IMAGE_CREATE1_HELPURL = '';
Blockly.Msg.MICROBIT_IMAGE_SHIFT_MESSAGE0 = '平移圖像 %1 %2 %3 位';
Blockly.Msg.MICROBIT_IMAGE_SHIFT_TOOLTIP = '向特定方向移動圖像，並返回移動後的結果。';
Blockly.Msg.MICROBIT_IMAGE_SHIFT_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/image.html#microbit.Image.shift_left';
Blockly.Msg.MICROBIT_IMAGE_SHIFT_LEFT = '左移';
Blockly.Msg.MICROBIT_IMAGE_SHIFT_RIGHT = '右移';
Blockly.Msg.MICROBIT_IMAGE_SHIFT_UP = '上移';
Blockly.Msg.MICROBIT_IMAGE_SHIFT_DOWN = '下移';
Blockly.Msg.MICROBIT_MICROBIT_PANIC_MESSAGE0 = '錯誤狀態碼 %1';
Blockly.Msg.MICROBIT_MICROBIT_PANIC_TOOLTIP = '進入錯誤模式，提示程序存在錯誤。需要重新啟動。用一個數字表示狀態碼。';
Blockly.Msg.MICROBIT_MICROBIT_PANIC_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/microbit.html#microbit.panic';
Blockly.Msg.MICROBIT_MICROBIT_RESET_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/microbit.html#microbit.reset';
Blockly.Msg.MICROBIT_MICROBIT_RESET_MESSAGE0 = '復位 micro:bit';
Blockly.Msg.MICROBIT_MICROBIT_RESET_TOOLTIP = '復位 micro:bit，重新運行';
Blockly.Msg.MICROBIT_MICROBIT_SLEEP_MESSAGE0 = '睡眠 %1 毫秒';
Blockly.Msg.MICROBIT_MICROBIT_SLEEP_TOOLTIP = '在進行下一個命令前，等待設定的時間。';
Blockly.Msg.MICROBIT_MICROBIT_SLEEP_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/microbit.html#microbit.sleep';
Blockly.Msg.MICROBIT_MICROBIT_RUNNING_TIME_MESSAGE0 = '運行時間';
Blockly.Msg.MICROBIT_MICROBIT_RUNNING_TIME_TOOLTIP = '獲取開機或復位後的運行時間（毫秒）。';
Blockly.Msg.MICROBIT_MICROBIT_RUNNING_TIME_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/microbit.html#microbit.running_time';
Blockly.Msg.MICROBIT_MICROBIT_TEMPERATURE_MESSAGE0 = '溫度';
Blockly.Msg.MICROBIT_MICROBIT_TEMPERATURE_TOOLTIP = '獲取 micro:bit 的溫度（℃）。';
Blockly.Msg.MICROBIT_MICROBIT_TEMPERATURE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/microbit.html#microbit.temperature';
Blockly.Msg.MICROBIT_MUSIC_PLAY_BUILT_IN_MESSAGE0 = '內置音樂 %1 %2 等待 %3 %4 循環 %5';
Blockly.Msg.MICROBIT_MUSIC_PLAY_BUILT_IN_TOOLTIP = '播放內置的音樂，可以設置等待模式和循環播放。';
Blockly.Msg.MICROBIT_MUSIC_PLAY_BUILT_IN_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/music.html#built-in-melodies';
Blockly.Msg.MICROBIT_MUSIC_PITCH_MESSAGE0 = '播放音調 %1 %2 延時  %3 毫秒';
Blockly.Msg.MICROBIT_MUSIC_PITCH_TOOLTIP = '在設定的時間長度裏播放音調。';
Blockly.Msg.MICROBIT_MUSIC_PITCH_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/music.html#music.pitch';
Blockly.Msg.MICROBIT_MUSIC_PLAY_LIST_OF_NOTES_MESSAGE0 = '播放音符列表 %1 等待 %2 %3 循環 %4';
Blockly.Msg.MICROBIT_MUSIC_PLAY_LIST_OF_NOTES_TOOLTIP = '播放音符列表，可以設置等待模式或循環模式。';
Blockly.Msg.MICROBIT_MUSIC_PLAY_LIST_OF_NOTES_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/music.html#musical-notation';
Blockly.Msg.MICROBIT_MUSIC_RESET_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/music.html#music.reset';
Blockly.Msg.MICROBIT_MUSIC_RESET_MESSAGE0 = '恢復音樂設置';
Blockly.Msg.MICROBIT_MUSIC_RESET_TOOLTIP = '將所有音樂設置 (當前節拍, 音階和周期) 恢復成默認值。';
Blockly.Msg.MICROBIT_MUSIC_STOP_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/music.html#music.stop';
Blockly.Msg.MICROBIT_MUSIC_STOP_MESSAGE0 = '停止播放音樂';
Blockly.Msg.MICROBIT_MUSIC_STOP_TOOLTIP = '停止播放音樂';
Blockly.Msg.MICROBIT_MUSIC_SET_TEMPO_MESSAGE0 = '設置每壹拍等同 %1 分音符，每分鐘節拍數 %2';
Blockly.Msg.MICROBIT_MUSIC_SET_TEMPO_TOOLTIP = '設置回放速度 (節拍)。壹定數量的滴答代表壹拍，每拍每分鐘播放次數 (BPM 每分鐘節拍)。';
Blockly.Msg.MICROBIT_MUSIC_SET_TEMPO_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/music.html#music.set_tempo';
Blockly.Msg.MICROBIT_MUSIC_GET_TEMPO_MESSAGE0 = '獲取當前節拍';
Blockly.Msg.MICROBIT_MUSIC_GET_TEMPO_TOOLTIP = '獲取當前節拍: 每節拍滴答數, 每分鐘節拍 (BPM)。';
Blockly.Msg.MICROBIT_MUSIC_GET_TEMPO_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/music.html#music.get_tempo';
Blockly.Msg.MICROBIT_NEOPIXEL_INITIALISE_MESSAGE0 = '使用 腳位 %1 控制， neopixel 彩燈數  %2 ';
Blockly.Msg.MICROBIT_NEOPIXEL_INITIALISE_TOOLTIP = '控制 neopixels 彩燈。需要設定 neopixels 彩燈數量和控制腳。';
Blockly.Msg.MICROBIT_NEOPIXEL_INITIALISE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#neopixel.NeoPixel';
Blockly.Msg.MICROBIT_NEOPIXEL_CLEAR_MESSAGE0 = '清除 neopixels 彩燈 %1';
Blockly.Msg.MICROBIT_NEOPIXEL_CLEAR_TOOLTIP = '清除所有 neopixels 彩燈';
Blockly.Msg.MICROBIT_NEOPIXEL_CLEAR_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#neopixel.NeoPixel.clear';
Blockly.Msg.MICROBIT_NEOPIXEL_SHOW_MESSAGE0 = '顯示 neopixels 彩燈 %1';
Blockly.Msg.MICROBIT_NEOPIXEL_SHOW_TOOLTIP = '顯示 / 更新全部 neopixels 彩燈。';
Blockly.Msg.MICROBIT_NEOPIXEL_SHOW_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#neopixel.NeoPixel.show';
Blockly.Msg.MICROBIT_NEOPIXEL_SET_MESSAGE0 = 'neopixels 彩燈控制 %1 設置位置 %2 紅色 %3 綠色 %4 藍色 %5';
Blockly.Msg.MICROBIT_NEOPIXEL_SET_TOOLTIP = '更新指定的 neopixel 彩燈的紅、綠、藍 (RGB) 顏色';
Blockly.Msg.MICROBIT_NEOPIXEL_SET_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#using-neopixels';
Blockly.Msg.MICROBIT_PIN_TOUCHED_MESSAGE0 = '腳位 %1 被觸摸';
Blockly.Msg.MICROBIT_PIN_TOUCHED_TOOLTIP = '如果引腳被觸摸將返回 “真”。';
Blockly.Msg.MICROBIT_PIN_TOUCHED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/pin.html#microbit.MicroBitTouchPin.is_touched';
Blockly.Msg.MICROBIT_PIN_WAS_PRESSED_MESSAGE0 = '腳位 %1 曾經被觸摸';
Blockly.Msg.MICROBIT_PIN_WAS_PRESSED_TOOLTIP = '如果引腳曾經被觸摸將返回 “真”。';
Blockly.Msg.MICROBIT_PIN_WAS_PRESSED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/pin.html#microbit.MicroBitTouchPin.was_pressed';
Blockly.Msg.MICROBIT_PIN_GET_PRESSES_MESSAGE0 = '腳位 %1 被觸摸的次數';
Blockly.Msg.MICROBIT_PIN_GET_PRESSES_TOOLTIP = '返回被觸摸的次數，然後清零。';
Blockly.Msg.MICROBIT_PIN_GET_PRESSES_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/pin.html#microbit.MicroBitTouchPin.get_presses';
Blockly.Msg.MICROBIT_PIN_READ_ANALOG_MESSAGE0 = '讀取引腳 %1 模擬電壓';
Blockly.Msg.MICROBIT_PIN_READ_ANALOG_TOOLTIP = '讀取引腳的模擬輸入電壓。';
Blockly.Msg.MICROBIT_PIN_READ_ANALOG_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/pin.html#microbit.MicroBitAnalogDigitalPin.read_analog';
Blockly.Msg.MICROBIT_PIN_WRITE_ANALOG_MESSAGE0 = '設置模擬量 %1 到引腳 %2';
Blockly.Msg.MICROBIT_PIN_WRITE_ANALOG_TOOLTIP = '寫入模擬參數到指定引腳上。';
Blockly.Msg.MICROBIT_PIN_WRITE_ANALOG_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/pin.html#microbit.MicroBitAnalogDigitalPin.write_analog';
Blockly.Msg.MICROBIT_PIN_READ_DIGITAL_MESSAGE0 = '讀取引腳 %1 的數字輸入';
Blockly.Msg.MICROBIT_PIN_READ_DIGITAL_TOOLTIP = '讀取引腳的數字輸入 (真 或 假)。';
Blockly.Msg.MICROBIT_PIN_READ_DIGITAL_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/pin.html#microbit.MicroBitDigitalPin.read_digital';
Blockly.Msg.MICROBIT_PIN_WRITE_DIGITAL_MESSAGE0 = '設置數字輸出 %1 到引腳 %2';
Blockly.Msg.MICROBIT_PIN_WRITE_DIGITAL_TOOLTIP = '寫入數字量 (真 或 假) 到指定引腳。';
Blockly.Msg.MICROBIT_PIN_WRITE_DIGITAL_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/pin.html#microbit.MicroBitDigitalPin.write_digital';
Blockly.Msg.MICROBIT_RADIO_ON_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.on';
Blockly.Msg.MICROBIT_RADIO_ON_MESSAGE0 = '打開無線廣播';
Blockly.Msg.MICROBIT_RADIO_ON_TOOLTIP = '打開無線廣播。需要明確聲明調用，因為它會消耗更多功率和占用更多內存。';
Blockly.Msg.MICROBIT_RADIO_OFF_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.off';
Blockly.Msg.MICROBIT_RADIO_OFF_MESSAGE0 = '關閉無線廣播';
Blockly.Msg.MICROBIT_RADIO_OFF_TOOLTIP = '關閉無線廣播，節省功耗和內存。';
Blockly.Msg.MICROBIT_RADIO_CONFIG_MESSAGE0 = '配置無線廣播消息長度 %1 %2 最大隊列數量 %3 %4 信道 %5 %6 廣播功率 %7 %8 地址 %9 %10 組 %11 %12 數據速率 %13';
Blockly.Msg.MICROBIT_RADIO_CONFIG_TOOLTIP = '配置無線廣播。\n 長度指單個消息的最大長度； \n 隊列指可以存放在消息隊列中消息的數量； \n 信道指無線廣播使用的無線頻率； \n 功率指發射廣播信號的強度； \n 地址：32位值； \n 組：8位值(0-255)； \n 數據速率指數據傳輸的速度。';
Blockly.Msg.MICROBIT_RADIO_CONFIG_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.config';
Blockly.Msg.MICROBIT_RADIO_RESET_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.reset';
Blockly.Msg.MICROBIT_RADIO_RESET_MESSAGE0 = '復位無線廣播';
Blockly.Msg.MICROBIT_RADIO_RESET_TOOLTIP = '恢復無線廣播到默認設置。';
Blockly.Msg.MICROBIT_RADIO_SEND_STRING_MESSAGE0 = '發送消息 %1';
Blockly.Msg.MICROBIT_RADIO_SEND_STRING_TOOLTIP = '廣播文字消息。';
Blockly.Msg.MICROBIT_RADIO_SEND_STRING_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.send';
Blockly.Msg.MICROBIT_RADIO_SEND_BYTES_MESSAGE0 = '發送字節 %1';
Blockly.Msg.MICROBIT_RADIO_SEND_BYTES_TOOLTIP = '廣播字節。';
Blockly.Msg.MICROBIT_RADIO_SEND_BYTES_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.send';
Blockly.Msg.MICROBIT_RADIO_RECEIVE_MESSAGE0 = '接收消息';
Blockly.Msg.MICROBIT_RADIO_RECEIVE_TOOLTIP = '接收消息。';
Blockly.Msg.MICROBIT_RADIO_RECEIVE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.receive';
Blockly.Msg.MICROBIT_RADIO_RECEIVE_BYTES_MESSAGE0 = '接收字節';
Blockly.Msg.MICROBIT_RADIO_RECEIVE_BYTES_TOOLTIP = '接收字節。';
Blockly.Msg.MICROBIT_RADIO_RECEIVE_BYTES_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/radio.html#radio.receive';
Blockly.Msg.MICROBIT_SPEECH_SAY_MESSAGE0 = '說 %1';
Blockly.Msg.MICROBIT_SPEECH_SAY_TOOLTIP = '嘗試說英語';
Blockly.Msg.MICROBIT_SPEECH_SAY_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/speech.html#speech.say';
Blockly.Msg.MICROBIT_SPEECH_PRONOUNCE_MESSAGE0 = '讀 %1';
Blockly.Msg.MICROBIT_SPEECH_PRONOUNCE_TOOLTIP = '精確發音。';
Blockly.Msg.MICROBIT_SPEECH_PRONOUNCE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/speech.html#phonemes';
Blockly.Msg.MICROBIT_SPEECH_SING_MESSAGE0 = '唱 %1';
Blockly.Msg.MICROBIT_SPEECH_SING_TOOLTIP = '象機器人壹樣唱歌。';
Blockly.Msg.MICROBIT_SPEECH_SING_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/speech.html#singing';

//MENUS
Blockly.Msg.MICROBIT_GESTURE_SHAKE = '搖晃';
Blockly.Msg.MICROBIT_GESTURE_UP = '上';
Blockly.Msg.MICROBIT_GESTURE_DOWN = '下';
Blockly.Msg.MICROBIT_GESTURE_LEFT = '左';
Blockly.Msg.MICROBIT_GESTURE_RIGHT = '右';
Blockly.Msg.MICROBIT_GESTURE_FACE_UP = '朝上';
Blockly.Msg.MICROBIT_GESTURE_FACE_DOWN = '朝下';
Blockly.Msg.MICROBIT_GESTURE_FREEFAIL = '自由下落';
Blockly.Msg.MICROBIT_IMAGE_HEART = '心形';
Blockly.Msg.MICROBIT_IMAGE_HEART_SMALL = '心(小)';
Blockly.Msg.MICROBIT_IMAGE_HAPPY = '高興';
Blockly.Msg.MICROBIT_IMAGE_SMILE = '笑臉';
Blockly.Msg.MICROBIT_IMAGE_SAD = '傷心';
Blockly.Msg.MICROBIT_IMAGE_CONFUSED = '困惑';
Blockly.Msg.MICROBIT_IMAGE_ANGRY = '生氣';
Blockly.Msg.MICROBIT_IMAGE_ASLEEP = '睡著';
Blockly.Msg.MICROBIT_IMAGE_SUPRISED = '驚訝';
Blockly.Msg.MICROBIT_IMAGE_SILLY = '愚蠢';
Blockly.Msg.MICROBIT_IMAGE_FABULOUS = '極妙';
Blockly.Msg.MICROBIT_IMAGE_MEH = '無聊';
Blockly.Msg.MICROBIT_IMAGE_YES = '是';
Blockly.Msg.MICROBIT_IMAGE_NO = '否';
Blockly.Msg.MICROBIT_IMAGE_CLOCK12 = '12點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK11 = '11點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK10 = '10點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK9 = '9點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK8 = '8點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK7 = '7點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK6 = '6點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK5 = '5點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK4 = '4點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK3 = '3點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK2 = '2點';
Blockly.Msg.MICROBIT_IMAGE_CLOCK1 = '1點';
Blockly.Msg.MICROBIT_IMAGE_ARROW_N = '箭頭－北';
Blockly.Msg.MICROBIT_IMAGE_ARROW_NE = '箭頭－東北';
Blockly.Msg.MICROBIT_IMAGE_ARROW_E = '箭頭－東';
Blockly.Msg.MICROBIT_IMAGE_ARROW_SE = '箭頭－東南';
Blockly.Msg.MICROBIT_IMAGE_ARROW_S = '箭頭－南';
Blockly.Msg.MICROBIT_IMAGE_ARROW_SW = '箭頭－西南';
Blockly.Msg.MICROBIT_IMAGE_ARROW_W = '箭頭－西';
Blockly.Msg.MICROBIT_IMAGE_ARROW_NW = '箭頭－西北';
Blockly.Msg.MICROBIT_IMAGE_TRIANGLE = '三角形';
Blockly.Msg.MICROBIT_IMAGE_TRIANGLE_LEFT = '左三角形';
Blockly.Msg.MICROBIT_IMAGE_CHESSBOARD = '棋盤';
Blockly.Msg.MICROBIT_IMAGE_DIAMOND = '菱形';
Blockly.Msg.MICROBIT_IMAGE_DIAMOND_SMALL = '菱形(小)';
Blockly.Msg.MICROBIT_IMAGE_SQUARE = '方形';
Blockly.Msg.MICROBIT_IMAGE_SQUARE_SMALL = '方形(小)';
Blockly.Msg.MICROBIT_IMAGE_RABBIT = '兔子';
Blockly.Msg.MICROBIT_IMAGE_COW = '牛';
Blockly.Msg.MICROBIT_IMAGE_MUSIC_CROTCHET = '四分音符';
Blockly.Msg.MICROBIT_IMAGE_MUSIC_QUAVER = '八分音符';
Blockly.Msg.MICROBIT_IMAGE_MUSIC_QUAVERS = '顫音';
Blockly.Msg.MICROBIT_IMAGE_PITCHFORK = '叉子';
Blockly.Msg.MICROBIT_IMAGE_XMAS = '聖誕樹';
Blockly.Msg.MICROBIT_IMAGE_PACMAN = '吃豆人';
Blockly.Msg.MICROBIT_IMAGE_TARGET = '目標';
Blockly.Msg.MICROBIT_IMAGE_TSHIRT = 'T恤衫';
Blockly.Msg.MICROBIT_IMAGE_ROLLERSKATE = '輪滑';
Blockly.Msg.MICROBIT_IMAGE_DUCK = '鴨子';
Blockly.Msg.MICROBIT_IMAGE_HOUSE = '房子';
Blockly.Msg.MICROBIT_IMAGE_TORTOISE = '烏龜';
Blockly.Msg.MICROBIT_IMAGE_BUTTERFLY = '蝴蝶';
Blockly.Msg.MICROBIT_IMAGE_STICKFIGURE = '線條畫';
Blockly.Msg.MICROBIT_IMAGE_GHOST = '幽靈';
Blockly.Msg.MICROBIT_IMAGE_SWORD = '寶劍';
Blockly.Msg.MICROBIT_IMAGE_GIRAFFE = '長頸鹿';
Blockly.Msg.MICROBIT_IMAGE_SKULL = '頭';
Blockly.Msg.MICROBIT_IMAGE_UMBRELLA = '傘';
Blockly.Msg.MICROBIT_IMAGE_SNAKE = '蛇';
Blockly.Msg.MICROBIT_IMAGE_ALL_CLOCKS = '所有時鐘';
Blockly.Msg.MICROBIT_IMAGE_ALL_ARROWS = '所有箭頭';
Blockly.Msg.MICROBIT_PIN_SET_SERVO_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%88%B5%E6%9C%BA';
Blockly.Msg.MICROBIT_PIN_SET_SERVO_TOOLTIP = '設置舵機角度，取值範圍為 0 ～ 180度';
Blockly.Msg.MICROBIT_PIN_SET_SERVO_MESSAGE0 = '設置舵機 腳位 %1 角度為 %2';
Blockly.Msg.MICROBIT_PIN_SET_MODE_HELPURL = '';
Blockly.Msg.MICROBIT_PIN_SET_MODE_TOOLTIP = '引腳模式有三種：懸空、上拉、下拉';
Blockly.Msg.MICROBIT_PIN_SET_MODE_MESSAGE0 = '設置引腳 %1 模式為 %2';
Blockly.Msg.MICROBIT_PIN_MODE_NO = '懸空';
Blockly.Msg.MICROBIT_PIN_MODE_UP = '上拉';
Blockly.Msg.MICROBIT_PIN_MODE_DOWN = '下拉';


//uart
Blockly.Msg.MICROBIT_UART_INIT_MESSAGE0 = '初始化串口波特率為 %3 TX為 %1 RX為 %2';
Blockly.Msg.MICROBIT_UART_INIT_TOOLTIP = '';
Blockly.Msg.MICROBIT_UART_INIT_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/uart.html';
Blockly.Msg.MICROBIT_UART_ANY_MSG_RECEIVED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/uart.html';
Blockly.Msg.MICROBIT_UART_ANY_MSG_RECEIVED_TOOLTIP = '';
Blockly.Msg.MICROBIT_UART_ANY_MSG_RECEIVED_MESSAGE0 = '串口接收到數據';
Blockly.Msg.MICROBIT_UART_READ_MSG_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/uart.html';
Blockly.Msg.MICROBIT_UART_READ_MSG_TOOLTIP = '';
Blockly.Msg.MICROBIT_UART_READ_MSG_MESSAGE0 = '讀取串口 %1 字節';
Blockly.Msg.MICROBIT_UART_READ_MSG_TO_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/uart.html';
Blockly.Msg.MICROBIT_UART_READ_MSG_TO_TOOLTIP = '';
Blockly.Msg.MICROBIT_UART_READ_MSG_TO_MESSAGE0 = '讀取串口 %1 字節存至 %2';
Blockly.Msg.MICROBIT_UART_WRITE_MSG_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/uart.html';
Blockly.Msg.MICROBIT_UART_WRITE_MSG_TOOLTIP = '';
Blockly.Msg.MICROBIT_UART_WRITE_MSG_MESSAGE0 = '串口發送數據 %1';
Blockly.Msg.MICROBIT_ALL_BYTES = "全部";
Blockly.Msg.MICROBIT_ALINE_BYTES = "壹行";
//labplus
Blockly.Msg.LABPLUS_BUTTON_IS_PRESSED_MESSAGE0 = '腳位 %1 被觸發';
Blockly.Msg.LABPLUS_BUTTON_IS_PRESSED_TOOLTIP = '如果指定按鍵按下返回 “真”，否則返回 “假”。';
Blockly.Msg.LABPLUS_BUTTON_IS_PRESSED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/button.html#Button.is_pressed';

Blockly.Msg.LABPLUS_BUTTON_WAS_PRESSED_MESSAGE0 = '腳位 %1 曾經被觸發';
Blockly.Msg.LABPLUS_BUTTON_WAS_PRESSED_TOOLTIP = '如果按鍵曾經按下過返回 “真”，否則返回 “假”。';
Blockly.Msg.LABPLUS_BUTTON_WAS_PRESSED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/button.html#Button.was_pressed';

Blockly.Msg.LABPLUS_BUTTON_GET_PRESSES_MESSAGE0 = '腳位 %1 被觸發過的次數';
Blockly.Msg.LABPLUS_BUTTON_GET_PRESSES_TOOLTIP = '返回按鍵按下的總次數，然後清除計數。';
Blockly.Msg.LABPLUS_BUTTON_GET_PRESSES_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/button.html#Button.get_presses';

Blockly.Msg.LABPLUS_LED_MESSAGE0 = '設置LED燈 腳位 %2 輸出 %1';
Blockly.Msg.LABPLUS_LED_TOOLTIP = '';
Blockly.Msg.LABPLUS_LED_HELPURL = 'http://wiki.labplus.cn/index.php?title=LED';

Blockly.Msg.LABPLUS_INFRARED_IS_TRIGGERED_MESSAGE0 = '紅外探測 腳位 %1 被觸發';
Blockly.Msg.LABPLUS_INFRARED_IS_TRIGGERED_TOOLTIP = '';
Blockly.Msg.LABPLUS_INFRARED_IS_TRIGGERED_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%BA%A2%E5%A4%96%E6%8E%A2%E6%B5%8B';

Blockly.Msg.LABPLUS_HEAT_SENSITIVE_DETECTOR_MESSAGE0 = '熱敏傳感器 腳位 %1 的值';
Blockly.Msg.LABPLUS_HEAT_SENSITIVE_DETECTOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_HEAT_SENSITIVE_DETECTOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%83%AD%E6%95%8F%E7%94%B5%E9%98%BB';

Blockly.Msg.LABPLUS_I2C_LIGHT_SENSOR_MESSAGE0 = 'I2C數字光線傳感器的值(lux)';
Blockly.Msg.LABPLUS_I2C_LIGHT_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_I2C_LIGHT_SENSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%95%B0%E5%AD%97%E5%85%89%E7%BA%BF';

Blockly.Msg.LABPLUS_WATER_LEVEL_DETECTOR_MESSAGE0 = '水位傳感器 腳位 %1 的值';
Blockly.Msg.LABPLUS_WATER_LEVEL_DETECTOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_WATER_LEVEL_DETECTOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%B0%B4%E4%BD%8D';

Blockly.Msg.LABPLUS_SMOKE_DETECTOR_IS_TRIGGERED_MESSAGE0 = '煙霧探測器 腳位 %1 被觸發';
Blockly.Msg.LABPLUS_SMOKE_DETECTOR_IS_TRIGGERED_TOOLTIP = '';
Blockly.Msg.LABPLUS_SMOKE_DETECTOR_IS_TRIGGERED_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%83%9F%E9%9B%BE';

Blockly.Msg.LABPLUS_BUZZER_FOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%9C%82%E9%B8%A3%E5%99%A8';
Blockly.Msg.LABPLUS_BUZZER_FOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_BUZZER_FOR_MESSAGE0 = '以頻率 %1 激活蜂鳴器 引腳0 %2 毫秒';

Blockly.Msg.LABPLUS_BUZZER_ON_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%9C%82%E9%B8%A3%E5%99%A8';
Blockly.Msg.LABPLUS_BUZZER_ON_TOOLTIP = '';
Blockly.Msg.LABPLUS_BUZZER_ON_MESSAGE0 = '以頻率 %1 激活蜂鳴器 引腳0';

Blockly.Msg.LABPLUS_BUZZER_OFF_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%9C%82%E9%B8%A3%E5%99%A8';
Blockly.Msg.LABPLUS_BUZZER_OFF_TOOLTIP = '';
Blockly.Msg.LABPLUS_BUZZER_OFF_MESSAGE0 = '關閉蜂鳴器 引腳0';

Blockly.Msg.LABPLUS_TM_HM_SENSOR_MESSAGE0 = 'I2C溫濕度傳感器的 %1 值';
Blockly.Msg.LABPLUS_TM_HM_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_TM_HM_SENSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%B8%A9%E6%B9%BF%E5%BA%A6';
Blockly.Msg.LABPLUS_TM_HM_SENSOR_TM = '溫度';
Blockly.Msg.LABPLUS_TM_HM_SENSOR_HM = '濕度';

Blockly.Msg.LABPLUS_SET_SERVO_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%88%B5%E6%9C%BA';
Blockly.Msg.LABPLUS_SET_SERVO_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_SERVO_MESSAGE0 = '設置舵機 腳位 %1 角度為 %2';

Blockly.Msg.LABPLUS_FINGERPRINT_SENSOR_MESSAGE0 = '指紋傳感器 腳位 %1 驗證通過';
Blockly.Msg.LABPLUS_FINGERPRINT_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_FINGERPRINT_SENSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%8C%87%E7%BA%B9';

Blockly.Msg.LABPLUS_SET_MOTOR_HELPURL = '';
Blockly.Msg.LABPLUS_SET_MOTOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_MOTOR_MESSAGE0 = '設置電機 %1 方向 %2 速度 %3';
Blockly.Msg.LABPLUS_SET_MOTOR_CLOCKWISE = '正轉';
Blockly.Msg.LABPLUS_SET_MOTOR_ANTI_CLOCKWISE = '反轉';

Blockly.Msg.LABPLUS_STOP_MOTOR_HELPURL = '';
Blockly.Msg.LABPLUS_STOP_MOTOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_STOP_MOTOR_MESSAGE0 = '停止電機';

Blockly.Msg.LABPLUS_GET_RFID_ID_MESSAGE0 = '射頻卡 腳位 %1 驗證通過';
Blockly.Msg.LABPLUS_GET_RFID_ID_TOOLTIP = '';
Blockly.Msg.LABPLUS_GET_RFID_ID_HELPURL = 'http://wiki.labplus.cn/index.php?title=RFID';

Blockly.Msg.LABPLUS_GET_RFID_VALUE_MESSAGE0 = '電子錢包 腳位 %1 余額';
Blockly.Msg.LABPLUS_GET_RFID_VALUE_TOOLTIP = '';
Blockly.Msg.LABPLUS_GET_RFID_VALUE_HELPURL = '';

Blockly.Msg.LABPLUS_SET_RFID_VALUE_MESSAGE0 = '設置電子錢包 腳位 %1 余額 %2 %3';
Blockly.Msg.LABPLUS_SET_RFID_VALUE_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_RFID_VALUE_HELPURL = '';
Blockly.Msg.LABPLUS_SET_RFID_ADD = '增加';
Blockly.Msg.LABPLUS_SET_RFID_MINUS = '減少';

Blockly.Msg.LABPLUS_SOUND_IS_TRIGGERED_MESSAGE0 = '聲音傳感器 腳位 %1 被觸發';
Blockly.Msg.LABPLUS_SOUND_IS_TRIGGERED_TOOLTIP = '';
Blockly.Msg.LABPLUS_SOUND_IS_TRIGGERED_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E9%BA%A6%E5%85%8B%E9%A3%8E';

Blockly.Msg.LABPLUS_USB_SWITCH_HELPURL = '';
Blockly.Msg.LABPLUS_USB_SWITCH_TOOLTIP = '';
Blockly.Msg.LABPLUS_USB_SWITCH_MESSAGE0 = '%1 USB開關 腳位 %2';
Blockly.Msg.LABPLUS_USB_SWITCH_ON = '打開';
Blockly.Msg.LABPLUS_USB_SWITCH_OFF = '關閉';

Blockly.Msg.LABPLUS_VOICE_RECORD_HELPURL = '';
Blockly.Msg.LABPLUS_VOICE_RECORD_TOOLTIP = '';
Blockly.Msg.LABPLUS_VOICE_RECORD_MESSAGE0 = '%1 語音錄放器 腳位 %2';
Blockly.Msg.LABPLUS_VOICE_RECORD_ON = '打開';
Blockly.Msg.LABPLUS_VOICE_RECORD_OFF = '關閉';

Blockly.Msg.LABPLUS_RGB_INITIALISE_MESSAGE0 = '使用 腳位 %1 控制，RGB 彩燈數  %2 ';
Blockly.Msg.LABPLUS_RGB_INITIALISE_TOOLTIP = '控制 RGB 彩燈。需要設定 neopixels 彩燈數量和控制腳。';
Blockly.Msg.LABPLUS_RGB_INITIALISE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#neopixel.NeoPixel';
Blockly.Msg.LABPLUS_RGB_CLEAR_MESSAGE0 = '清除 RGB 彩燈 %1';
Blockly.Msg.LABPLUS_RGB_CLEAR_TOOLTIP = '清除所有 RGB 彩燈';
Blockly.Msg.LABPLUS_RGB_CLEAR_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#neopixel.NeoPixel.clear';
Blockly.Msg.LABPLUS_RGB_SHOW_MESSAGE0 = '顯示 RGB 彩燈 %1';
Blockly.Msg.LABPLUS_RGB_SHOW_TOOLTIP = '顯示 / 更新全部 RGB 彩燈。';
Blockly.Msg.LABPLUS_RGB_SHOW_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#neopixel.NeoPixel.show';
Blockly.Msg.LABPLUS_RGB_SET_MESSAGE0 = 'RGB 彩燈控制 %1 設置位置 %2 紅色 %3 綠色 %4 藍色 %5';
Blockly.Msg.LABPLUS_RGB_SET_TOOLTIP = '更新指定的 RGB 彩燈的紅、綠、藍 (RGB) 顏色';
Blockly.Msg.LABPLUS_RGB_SET_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/neopixel.html#using-neopixels';

Blockly.Msg.LABPLUS_COMPITITION_INIT_EXTENDED_PINS_MESSAGE0 = '設置擴展端口 IO %1 為 %2';
Blockly.Msg.LABPLUS_COMPITITION_INIT_EXTENDED_PINS_TOOLTIP = '0表示輸出引腳,1表示輸入引腳';
Blockly.Msg.LABPLUS_COMPITITION_INIT_EXTENDED_PINS_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%AB%AF%E5%8F%A3%E6%89%A9%E5%B1%95';

Blockly.Msg.LABPLUS_COMPITITION_INIT_EXTENDED_PINS_INPUT = '輸入';
Blockly.Msg.LABPLUS_COMPITITION_INIT_EXTENDED_PINS_OUTPUT = '輸出';

Blockly.Msg.LABPLUS_SET_EXTIO_MODE_INPUT = '輸入';
Blockly.Msg.LABPLUS_SET_EXTIO_MODE_OUTPUT = '輸出';

Blockly.Msg.LABPLUS_SET_EXTIO_MODE_MESSAGE0 = '初始化擴展端口 %1 IO0 為 %2 %3 IO1 為 %4 %5 IO2 為 %6 %7 IO3 為 %8 %9 IO4 為 %10 %11 IO5 為 %12 %13 IO6 為 %14 %15 IO7 為 %16';
Blockly.Msg.LABPLUS_SET_EXTIO_MODE_TOOLTIP = '0表示輸出引腳,1表示輸入引腳';
Blockly.Msg.LABPLUS_SET_EXTIO_MODE_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%AB%AF%E5%8F%A3%E6%89%A9%E5%B1%95';

Blockly.Msg.LABPLUS_READ_EXTENDED_PIN_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%AB%AF%E5%8F%A3%E6%89%A9%E5%B1%95';
Blockly.Msg.LABPLUS_READ_EXTENDED_PIN_TOOLTIP = '';
Blockly.Msg.LABPLUS_READ_EXTENDED_PIN_MESSAGE0 = '讀取擴展端口值 IO %1'

Blockly.Msg.LABPLUS_WRITE_EXTENDED_PIN_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%AB%AF%E5%8F%A3%E6%89%A9%E5%B1%95';
Blockly.Msg.LABPLUS_WRITE_EXTENDED_PIN_TOOLTIP = '';
Blockly.Msg.LABPLUS_WRITE_EXTENDED_PIN_MESSAGE0 = '設置擴展端口 IO %1 值為 %2';

Blockly.Msg.LABPLUS_I2C_ULTRASONIC_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%B6%85%E5%A3%B0%E6%B3%A2';
Blockly.Msg.LABPLUS_I2C_ULTRASONIC_TOOLTIP = '';
Blockly.Msg.LABPLUS_I2C_ULTRASONIC_MESSAGE0 = 'I2C超聲波傳感器的值';

Blockly.Msg.MICROBIT_SET_MUSIC_PIN_HELPURL = '';
Blockly.Msg.MICROBIT_SET_MUSIC_PIN_TOOLTIP = '';
Blockly.Msg.MICROBIT_SET_MUSIC_PIN_MESSAGE0 = '設置默認蜂鳴器引腳為 %1';

Blockly.Msg.LABPLUS_HUMAN_DETECTOR_IS_TRIGGERED_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E4%BA%BA%E4%BD%93%E6%84%9F%E5%BA%94';
Blockly.Msg.LABPLUS_HUMAN_DETECTOR_IS_TRIGGERED_TOOLTIP = '';
Blockly.Msg.LABPLUS_HUMAN_DETECTOR_IS_TRIGGERED_MESSAGE0 = '人體感應 腳位 %1 被觸發';

Blockly.Msg.LABPLUS_MAGNETIC_SWITCH_IS_TRIGGERED_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E9%97%A8%E7%A3%81%E5%BC%80%E5%85%B3';
Blockly.Msg.LABPLUS_MAGNETIC_SWITCH_IS_TRIGGERED_TOOLTIP = '';
Blockly.Msg.LABPLUS_MAGNETIC_SWITCH_IS_TRIGGERED_MESSAGE0 = '門磁開關 腳位 %1 被觸發';

Blockly.Msg.LABPLUS_SOUND_LEVEL_SENSOR_HELPURL = '';
Blockly.Msg.LABPLUS_SOUND_LEVEL_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_SOUND_LEVEL_SENSOR_MESSAGE0 = '聲音傳感器 腳位 %1 的值';

Blockly.Msg.LABPLUS_SMOKE_SENSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%83%9F%E9%9B%BE';
Blockly.Msg.LABPLUS_SMOKE_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_SMOKE_SENSOR_MESSAGE0 = '煙霧傳感器 腳位 %1 的值';

Blockly.Msg.LABPLUS_SOIL_MOISTURE_SENSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E5%9C%9F%E5%A3%A4%E6%B9%BF%E5%BA%A6';
Blockly.Msg.LABPLUS_SOIL_MOISTURE_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_SOIL_MOISTURE_SENSOR_MESSAGE0 = '土壤濕度傳感器 腳位 %1 的值';

Blockly.Msg.LABPLUS_FAN_SWITCH_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%8E%92%E9%A3%8E%E6%89%87';
Blockly.Msg.LABPLUS_FAN_SWITCH_TOOLTIP = '';
Blockly.Msg.LABPLUS_FAN_SWITCH_MESSAGE0 = '%1 風扇 腳位 %2';

Blockly.Msg.LABPLUS_VOICE_RECORD_ON_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%AF%AD%E9%9F%B3%E5%BD%95%E6%94%BE';
Blockly.Msg.LABPLUS_VOICE_RECORD_ON_TOOLTIP = '';
Blockly.Msg.LABPLUS_VOICE_RECORD_ON_MESSAGE0 = '打開錄放器 %1 腳位 %2';
Blockly.Msg.LABPLUS_VOICE_RECORD_PLAY = '播放';
Blockly.Msg.LABPLUS_VOICE_RECORD_REC = '錄音';

Blockly.Msg.LABPLUS_VOICE_RECORD_OFF_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%AF%AD%E9%9F%B3%E5%BD%95%E6%94%BE';
Blockly.Msg.LABPLUS_VOICE_RECORD_OFF_TOOLTIP = '';
Blockly.Msg.LABPLUS_VOICE_RECORD_OFF_MESSAGE0 = '關閉錄放器 腳位 %1';


Blockly.Msg.LABPLUS_MOTOR_ON_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E6%9C%BA%E9%A9%B1%E5%8A%A8';
Blockly.Msg.LABPLUS_MOTOR_ON_TOOLTIP = '';
Blockly.Msg.LABPLUS_MOTOR_ON_MESSAGE0 = '打開直流電機 %1 速度 %2 腳位 %3';
Blockly.Msg.LABPLUS_MOTOR_ON_CLOCKWISE = '正轉';
Blockly.Msg.LABPLUS_MOTOR_ON_ANTICLOCKWISE = '反轉';

Blockly.Msg.LABPLUS_MOTOR_OFF_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E6%9C%BA%E9%A9%B1%E5%8A%A8';
Blockly.Msg.LABPLUS_MOTOR_OFF_TOOLTIP = '';
Blockly.Msg.LABPLUS_MOTOR_OFF_MESSAGE0 = '停止直流電機 腳位 %1';

Blockly.Msg.LABPLUS_READ_COLOR_FROM_I2C_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E9%A2%9C%E8%89%B2';
Blockly.Msg.LABPLUS_READ_COLOR_FROM_I2C_TOOLTIP = '';
Blockly.Msg.LABPLUS_READ_COLOR_FROM_I2C_MESSAGE0 = 'I2C顏色傳感器讀取並儲存顏色';

Blockly.Msg.LABPLUS_RGB_COLOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=RGB_LED';
Blockly.Msg.LABPLUS_RGB_COLOR_TOOLTIP = '讀取已儲存的顏色';
Blockly.Msg.LABPLUS_RGB_COLOR_MESSAGE0 = 'RGB顏色 %1';

Blockly.Msg.LABPLUS_SET_I2C_DIGITS_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%95%B0%E7%A0%81%E7%AE%A1';
Blockly.Msg.LABPLUS_SET_I2C_DIGITS_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_DIGITS_MESSAGE0 = '設置I2C數碼管的值為 %1';

Blockly.Msg.LABPLUS_TURN_OFF_I2C_DIGITS_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%95%B0%E7%A0%81%E7%AE%A1';
Blockly.Msg.LABPLUS_TURN_OFF_I2C_DIGITS_TOOLTIP = '';
Blockly.Msg.LABPLUS_TURN_OFF_I2C_DIGITS_MESSAGE0 = '關閉I2C數碼管';

Blockly.Msg.LABPLUS_UART_SET_MIDI_MELODIC_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E5%AD%90%E7%90%B4';
Blockly.Msg.LABPLUS_UART_SET_MIDI_MELODIC_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_SET_MIDI_MELODIC_MESSAGE0 = '設置MIDI模組音調為 %1';

Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E5%AD%90%E7%90%B4';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_MESSAGE0 = 'MIDI模組 %2 音符 %1';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_Do = 'Do';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_Re = 'Re';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_Mi = 'Mi';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_Fa = 'Fa';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_Sol = 'Sol';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_La = 'La';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE_Si = 'Si';
Blockly.Msg.LABPLUS_UART_PLAY_MIDI_NOTE = '播放';
Blockly.Msg.LABPLUS_UART_OFF_MIDI_NOTE = '停止';



Blockly.Msg.LABPLUS_UART_OFF_MIDI_NOTE_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E5%AD%90%E7%90%B4';
Blockly.Msg.LABPLUS_UART_OFF_MIDI_NOTE_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_OFF_MIDI_NOTE_MESSAGE0 = 'MIDI模組停止播放音符 %1';

Blockly.Msg.LABPLUS_UART_INIT_MIDI_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E5%AD%90%E7%90%B4';
Blockly.Msg.LABPLUS_UART_INIT_MIDI_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_INIT_MIDI_MESSAGE0 = '初始化MIDI模組 %1';

Blockly.Msg.LABPLUS_LINE_FOLLOWER_IS_TRIGGERED_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E5%BE%AA%E8%BF%B9';
Blockly.Msg.LABPLUS_LINE_FOLLOWER_IS_TRIGGERED_TOOLTIP = '';
Blockly.Msg.LABPLUS_LINE_FOLLOWER_IS_TRIGGERED_MESSAGE0 = '循跡傳感器 腳位 %1 檢測為黑';

Blockly.Msg.LABPLUS_TEMPERATURE_SENSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=LM35%E6%B8%A9%E5%BA%A6';
Blockly.Msg.LABPLUS_TEMPERATURE_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_TEMPERATURE_SENSOR_MESSAGE0 = 'LM35溫度傳感器 腳位 %1 的值';

Blockly.Msg.LABPLUS_ROTATE_DIMMER_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%97%8B%E9%92%AE%E7%94%B5%E4%BD%8D%E5%99%A8';
Blockly.Msg.LABPLUS_ROTATE_DIMMER_TOOLTIP = '';
Blockly.Msg.LABPLUS_ROTATE_DIMMER_MESSAGE0 = '旋轉電位器 腳位 %1 的值';

Blockly.Msg.LABPLUS_SHAKE_DETECTOR_IS_TRIGGERED_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E9%9C%87%E5%8A%A8';
Blockly.Msg.LABPLUS_SHAKE_DETECTOR_IS_TRIGGERED_TOOLTIP = '';
Blockly.Msg.LABPLUS_SHAKE_DETECTOR_IS_TRIGGERED_MESSAGE0 = '震動傳感器 腳位 %1 被觸發';

Blockly.Msg.LABPLUS_LASER_SWITCH_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%BF%80%E5%85%89%E5%8F%91%E5%B0%84';
Blockly.Msg.LABPLUS_LASER_SWITCH_TOOLTIP = '';
Blockly.Msg.LABPLUS_LASER_SWITCH_MESSAGE0 = '%1 激光開關 腳位 %2';

Blockly.Msg.LABPLUS_4BUTTON_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E5%9B%9B%E6%8C%89%E9%94%AE';
Blockly.Msg.LABPLUS_4BUTTON_TOOLTIP = '';
Blockly.Msg.LABPLUS_4BUTTON_MESSAGE0 = '四向按鍵模組 腳位 %1 按鍵 %2 被按下';
Blockly.Msg.BLUE = 'A';
Blockly.Msg.GREEN = 'B';
Blockly.Msg.RED = 'C';
Blockly.Msg.YELLOW = 'D';

Blockly.Msg.LABPLUS_JOYSTICK_HELPURL = '';
Blockly.Msg.LABPLUS_JOYSTICK_TOOLTIP = '';
Blockly.Msg.LABPLUS_JOYSTICK_MESSAGE0 = '搖桿 引腳A0 %1 引腳A1 %2   %3 軸的值';

Blockly.Msg.LABPLUS_UART_MP3_PLAY_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E9%9F%B3%E4%B9%90%E6%92%AD%E6%94%BE';
Blockly.Msg.LABPLUS_UART_MP3_PLAY_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_MP3_PLAY_MESSAGE0 = 'MP3模組(UART)播放第 %1 首音樂';

Blockly.Msg.LABPLUS_UART_MP3_SET_VOLUME_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E9%9F%B3%E4%B9%90%E6%92%AD%E6%94%BE';
Blockly.Msg.LABPLUS_UART_MP3_SET_VOLUME_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_MP3_SET_VOLUME_MESSAGE0 = '設置MP3模組(UART)音量為 %1';

Blockly.Msg.LABPLUS_UART_MP3_SET_STATUS_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E9%9F%B3%E4%B9%90%E6%92%AD%E6%94%BE';
Blockly.Msg.LABPLUS_UART_MP3_SET_STATUS_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_MP3_SET_STATUS_MESSAGE0 = '設置MP3模組(UART)狀態為 %1';
Blockly.Msg.PAUSE = '暫停';
Blockly.Msg.STOP = '停止';
Blockly.Msg.PLAY = '繼續播放';

Blockly.Msg.LABPLUS_UART_INIT_HELPURL = 'http://wiki.labplus.cn/index.php?title=Bluebit';
Blockly.Msg.LABPLUS_UART_INIT_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_INIT_MESSAGE0 = '初始化串口波特率為 %3 TX為 %1 RX為 %2';

Blockly.Msg.LABPLUS_VOICE_RECORD_ON1_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%AF%AD%E9%9F%B3%E5%BD%95%E6%94%BE';
Blockly.Msg.LABPLUS_VOICE_RECORD_ON1_TOOLTIP = '';
Blockly.Msg.LABPLUS_VOICE_RECORD_ON1_MESSAGE0 = '打開錄放器 %1 %2 引腳REC %3 引腳PLAY %4';

Blockly.Msg.LABPLUS_VOICE_RECORD_OFF1_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%AF%AD%E9%9F%B3%E5%BD%95%E6%94%BE';
Blockly.Msg.LABPLUS_VOICE_RECORD_OFF1_TOOLTIP = '';
Blockly.Msg.LABPLUS_VOICE_RECORD_OFF1_MESSAGE0 = '關閉錄放器 %1 引腳REC %2 引腳PLAY %3';

Blockly.Msg.LABPLUS_MOTOR_ON1_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E6%9C%BA%E9%A9%B1%E5%8A%A8';
Blockly.Msg.LABPLUS_MOTOR_ON1_TOOLTIP = '';
Blockly.Msg.LABPLUS_MOTOR_ON1_MESSAGE0 = '打開直流電機 %1 速度 %2 引腳AIN1 %3 引腳AIN2 %4';

Blockly.Msg.LABPLUS_MOTOR_OFF1_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%94%B5%E6%9C%BA%E9%A9%B1%E5%8A%A8';
Blockly.Msg.LABPLUS_MOTOR_OFF1_TOOLTIP = '';
Blockly.Msg.LABPLUS_MOTOR_OFF1_MESSAGE0 = '停止直流電機 %1 引腳AIN1 %2 引腳AIN2 %3';

Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CURSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=1602_LCD';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CURSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CURSOR_MESSAGE0 = '設置LCD遊標位置%1 X %2 Y %3';


Blockly.Msg.LABPLUS_SET_I2C_LCD1602_PRINT_HELPURL = 'http://wiki.labplus.cn/index.php?title=1602_LCD';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_PRINT_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_PRINT_MESSAGE0 = '設置LCD顯示 %1';

Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SCROLL_HELPURL = 'http://wiki.labplus.cn/index.php?title=1602_LCD';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SCROLL_TOOLTIP = '配合循環次數使用';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SCROLL_MESSAGE0 = '%1滾動LCD顯示內容';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SCROLL_ALEFT = '向左';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SCROLL_RIGHTWARD = '向右';

Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CLEAR_HELPURL = 'http://wiki.labplus.cn/index.php?title=1602_LCD';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CLEAR_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CLEAR_MESSAGE0 = '清除LCD顯示內容';

Blockly.Msg.LABPLUS_SET_I2C_LCD1602_STATE_HELPURL = 'http://wiki.labplus.cn/index.php?title=1602_LCD';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_STATE_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_STATE_MESSAGE0 = '設置LCD %1';

Blockly.Msg.LABPLUS_SET_I2C_LCD1602_HIDE_CURSOR = '消隱光標';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SHOW_CURSOR = '顯示光標';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_BLINK_CURSOR = '光標閃爍';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SCROLL_LEFT = '左滾動顯示';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_SCROLL_RIGHT = '右滾動顯示';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_LEFT_TO_RIGHT = '字符串流從左到右';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_RIGHT_TO_LEFT = '字符串流從右到左';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CURSOR_TO_ORIGIN = '光標回到原點';
Blockly.Msg.LABPLUS_SET_I2C_LCD1602_CLEAR = '清屏';

Blockly.Msg.LABPLUS_UART_ANY_MSG_RECEIVED_HELPURL = 'http://wiki.labplus.cn/index.php?title=Bluebit';
Blockly.Msg.LABPLUS_UART_ANY_MSG_RECEIVED_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_ANY_MSG_RECEIVED_MESSAGE0 = '%1 接收到數據';
Blockly.Msg.BLUEBIT_UART = '串口';
Blockly.Msg.BLUEBIT_INFRARED_SIGNAL = '紅外信號';
Blockly.Msg.BLUEBIT_BLUEBOOTH = '藍牙';
Blockly.Msg.LABPLUS_UART_READ_MSG_HELPURL = 'http://wiki.labplus.cn/index.php?title=Bluebit';
Blockly.Msg.LABPLUS_UART_READ_MSG_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_READ_MSG_MESSAGE0 = '讀取 %1 數據';
Blockly.Msg.LABPLUS_UART_WRITE_MSG_HELPURL = 'http://wiki.labplus.cn/index.php?title=Bluebit';
Blockly.Msg.LABPLUS_UART_WRITE_MSG_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_WRITE_MSG_MESSAGE0 = '%1 發送數據 %2';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%82%B9%E9%98%B5';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_MESSAGE0 = '設置點陣 %1 首個行顯示%2 第二行顯示%3 第三行顯示%4 第四行顯示%5 第五行顯示%6 第六行顯示%7 第七行顯示%8 第八行顯示%9 ';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_MESSAGE2 = '設置點陣 %1 %2 %3 %4 %5 %6 %7 %8 %9 %10 %11 %12 %13 %14 %15 %16 %17 %18 %19 %20 %21 %22 %23 %24 %25 %26 %27 %28 %29 %30 %31 %32 %33 %34 %35 %36 %37 %38 %39 %40 %41 %42 %43 %44 %45 %46 %47 %48 %49 %50 %51 %52 %53 %54 %55 %56 %57 %58 %59 %60 %61 %62 %63 %64 %65 %66 %67 %68 %69 %70 %71 %72';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_CLEAR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%82%B9%E9%98%B5';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_CLEAR_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_CLEAR_MESSAGE0 = '清空點陣';

Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_DRAW_PIXEL_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%82%B9%E9%98%B5';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_DRAW_PIXEL_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_DRAW_PIXEL_MESSAGE0 = '點陣描點 %1 X %2 Y %3';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_SHOW_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E7%82%B9%E9%98%B5';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_SHOW_TOOLTIP = '';
Blockly.Msg.LABPLUS_SET_I2C_LED_MATRIX_SHOW_MESSAGE0 = '點陣顯示生效';

Blockly.Msg.LABPLUS_UART_SET_OLCD_HELPURL = 'http://wiki.labplus.cn/index.php?title=LCD';
Blockly.Msg.LABPLUS_UART_SET_OLCD_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_SET_OLCD_MESSAGE0 = '設置OLCD屏 %1 X %2 Y %3 顯示文本 %4 字體為 %5';
Blockly.Msg.LABPLUS_UART_SET_OLCD_CLEAR_HELPURL = 'http://wiki.labplus.cn/index.php?title=LCD';
Blockly.Msg.LABPLUS_UART_SET_OLCD_CLEAR_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_SET_OLCD_CLEAR_MESSAGE0 = '在OLCD屏上擦除矩陣 %1 X1 %2 Y1 %3 X2 %4 Y2 %5';
Blockly.Msg.LABPLUS_UART_SET_OLCD_CLEAR_ALL_MESSAGE0 = '清空OLCD屏';
Blockly.Msg.LABPLUS_UART_SET_OLCD_CLEAR_ALL_HELPURL = 'http://wiki.labplus.cn/index.php?title=LCD';
Blockly.Msg.LABPLUS_UART_SET_OLCD_CLEAR_ALL_TOOLTIP = '';
Blockly.Msg.LABPLUS_LIGHT_SENSOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E6%A8%A1%E6%8B%9F%E5%85%89%E7%BA%BF';
Blockly.Msg.LABPLUS_LIGHT_SENSOR_TOOLTIP = '';
Blockly.Msg.LABPLUS_LIGHT_SENSOR_MESSAGE0 = '模擬光線傳感器 腳位 %1 的值';
Blockly.Msg.LABPLUS_BUTTON_MODULE_IS_PRESSED_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/i2c.html';
Blockly.Msg.LABPLUS_BUTTON_MODULE_IS_PRESSED_TOOLTIP = '';
Blockly.Msg.LABPLUS_BUTTON_MODULE_IS_PRESSED_MESSAGE0 = '按鍵模組 腳位 %1 被按下';

Blockly.Msg.MICROBIT_EXT2_SET_SERVO_HELPURL = 'http://wiki.labplus.cn/index.php?title=Extend:bit%E2%85%A1';
Blockly.Msg.MICROBIT_EXT2_SET_SERVO_TOOLTIP = '';
Blockly.Msg.MICROBIT_EXT2_SET_SERVO_MESSAGE0 = '設置舵機 %1 的角度為 %2';
Blockly.Msg.MICROBIT_EXT2_SET_MOTOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=Extend:bit%E2%85%A1';
Blockly.Msg.MICROBIT_EXT2_SET_MOTOR_TOOLTIP = '';
Blockly.Msg.MICROBIT_EXT2_SET_MOTOR_MESSAGE0 = '設置馬達 %1 方向 %2 速度 %3';
Blockly.Msg.MICROBIT_EXT2_STOP_MOTOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=Extend:bit%E2%85%A1';
Blockly.Msg.MICROBIT_EXT2_STOP_MOTOR_TOOLTIP = '';
Blockly.Msg.MICROBIT_EXT2_STOP_MOTOR_MESSAGE0 = '停止馬達 %1';
Blockly.Msg.MICROBIT_EXT2_SOUND_VALUE_MESSAGE0 = '聲音傳感器的值';
Blockly.Msg.MICROBIT_EXT2_SOUND_VALUE_HELPURL = 'http://wiki.labplus.cn/index.php?title=Extend:bit%E2%85%A1';
Blockly.Msg.MICROBIT_EXT2_SOUND_VALUE_TOOLTIP = '';
Blockly.Msg.MICROBIT_EXT2_LIGHT_VALUE_MESSAGE0 = '光線傳感器的值';
Blockly.Msg.MICROBIT_EXT2_LIGHT_VALUE_HELPURL = 'http://wiki.labplus.cn/index.php?title=Extend:bit%E2%85%A1';
Blockly.Msg.MICROBIT_EXT2_LIGHT_VALUE_TOOLTIP = '';

Blockly.Msg.MICROBIT_EXT2_SET_PWM_MESSAGE0 = '設置 PWM 接口 %1 輸出值為 %2';
Blockly.Msg.MICROBIT_EXT2_SET_PWM_TOOLTIP = 'PWM 值範圍 0～4095';
Blockly.Msg.MICROBIT_EXT2_SET_PWM_HELPURL = 'http://wiki.labplus.cn/index.php?title=Extend:bit%E2%85%A1';
Blockly.Msg.MICROBIT_EXT2_STEP_MOTOR_MESSAGE0 = '驅動步進電機 接口 %1 方向 %2 速度 %3';
Blockly.Msg.MICROBIT_EXT2_STEP_MOTOR_TOOLTIP = '註意：該功能不能與驅動舵機和DC馬達及PWM輸出同時使用。因為線序的問題，只支持28BYJ-48步進電機。\nspeed 值範圍 25～150';
Blockly.Msg.MICROBIT_EXT2_STEP_MOTOR_HELPURL = 'http://wiki.labplus.cn/index.php?title=Extend:bit%E2%85%A1';

Blockly.Msg.MICROBIT_INIT_I2C_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/i2c.html';
Blockly.Msg.MICROBIT_INIT_I2C_TOOLTIP = '';
Blockly.Msg.MICROBIT_INIT_I2C_MESSAGE0 = '初始化I2C 頻率 %1 引腳SDA %2 引腳SCL %3';
Blockly.Msg.MICROBIT_I2C_READ_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/i2c.html';
Blockly.Msg.MICROBIT_I2C_READ_TOOLTIP = '';
Blockly.Msg.MICROBIT_I2C_READ_MESSAGE0 = 'I2C讀取從地址 %1 讀取 %2 字節';
Blockly.Msg.MICROBIT_I2C_WRITE_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/i2c.html';
Blockly.Msg.MICROBIT_I2C_WRITE_TOOLTIP = '';
Blockly.Msg.MICROBIT_I2C_WRITE_MESSAGE0 = 'I2C寫入 %2 到地址 %1';
Blockly.Msg.MICROBIT_CONVERT_BYTEARRAY_HELPURL = 'https://microbit-micropython.readthedocs.io/en/latest/i2c.html';
Blockly.Msg.MICROBIT_CONVERT_BYTEARRAY_TOOLTIP = '';
Blockly.Msg.MICROBIT_CONVERT_BYTEARRAY_MESSAGE0 = '轉bytearray %1';

Blockly.Msg.BOTBIT_MOTOR_ON_HELPURL = '';
Blockly.Msg.BOTBIT_MOTOR_ON_TOOLTIP = '範圍：-2000~2000';
Blockly.Msg.BOTBIT_MOTOR_ON_MESSAGE0 = '設置機器人 %1 右輪速度為 %2 左輪速度為 %3';
Blockly.Msg.BOTBIT_MOTOR_LEFT = '左';
Blockly.Msg.BOTBIT_MOTOR_RIGHT = '右';
Blockly.Msg.BOTBIT_SERVO_UP = '上方';
Blockly.Msg.BOTBIT_SERVO_DOWN = '下方';
Blockly.Msg.BOTBIT_MOTOR_FORWARD = '前進';
Blockly.Msg.BOTBIT_MOTOR_BACKWARD = '後退';

Blockly.Msg.BOTBIT_TURN_HELPURL = '';
Blockly.Msg.BOTBIT_TURN_MESSAGE0 = '舞步(turn)  步數 %1 單步時間 %2 毫秒  方向 %3';
Blockly.Msg.BOTBIT_TURN_TOOLTIP = "";

Blockly.Msg.BOTBIT_setRGB_HELPURL = '';
Blockly.Msg.BOTBIT_setRGB_MESSAGE0 = '設 %1 燈 R %2 G %3 B %4';
Blockly.Msg.BOTBIT_setRGB_TOOLTIP = 'r,g,b：0~255';

Blockly.Msg.BOTBIT_setHSV_HELPURL = '';
Blockly.Msg.BOTBIT_setHSV_MESSAGE0 = '設 %1 燈 h %2 s %3 v %4';
Blockly.Msg.BOTBIT_setHSV_TOOLTIP = "h: 0~360，s: 0~1，v: 0~1";

Blockly.Msg.BOTBIT_HOLDBALL_HELPURL = '';
Blockly.Msg.BOTBIT_HOLDBALL_TOOLTIP = '';
Blockly.Msg.BOTBIT_HOLDBALL_MESSAGE0 = '雙臂抱起';

Blockly.Msg.BOTBIT_STEERING_ENGINEL_HELPURL = '';
Blockly.Msg.BOTBIT_STEERING_ENGINEL_TOOLTIP = '角度範圍為-45°~45°';
Blockly.Msg.BOTBIT_STEERING_ENGINEL_MESSAGE0 = '獲取 %1臂 速度';
Blockly.Msg.BOTBIT_STEERING_ENGINET_MESSAGE0 = '獲取 %1臂 傾斜角';
Blockly.Msg.X = 'X:';
Blockly.Msg.Y = 'Y:';

Blockly.Msg.W = '寬:';
Blockly.Msg.H = '高:';
Blockly.Msg.BOTBIT_SERVO_Y = 'Y軸舵機';
Blockly.Msg.BOTBIT_SERVO_X = 'X軸舵機';
Blockly.Msg.BOTBIT_SERVO_Z = 'Z軸舵機';
Blockly.Msg.BOTBIT_STEERING_ENGINE_LEG_HELPURL = '';
Blockly.Msg.BOTBIT_STEERING_ENGINE_LEG_TOOLTIP = '角度範圍為-45°~45°';
Blockly.Msg.BOTBIT_STEERING_ENGINE_LEG_MESSAGE0 = '設置 %1腿 %2舵機的角度為 %3';

Blockly.Msg.BOTBIT_UPDATEPOSITION_HELPURL = '';
Blockly.Msg.BOTBIT_UPDATEPOSITION_TOOLTIP = '';
Blockly.Msg.BOTBIT_UPDATEPOSITION_MESSAGE0 = '刷新舵機角度';

Blockly.Msg.BOTBIT_ULTRASONIC_HELPURL = '';
Blockly.Msg.BOTBIT_ULTRASONIC_TOOLTIP = '';
Blockly.Msg.BOTBIT_ULTRASONIC_MESSAGE0 = '超聲波傳感器的值';

Blockly.Msg.BOTBIT_WALKING_HELPURL = '';
Blockly.Msg.BOTBIT_WALKING_TOOLTIP = '周期越短, 速度越快, 推薦1000~2000';
Blockly.Msg.BOTBIT_WALKING_MESSAGE0 = '舞步(walking) 步數%2 周期%3 方向%1 ';
Blockly.Msg.BOTBIT_WALKING_FORWARD = '前';
Blockly.Msg.BOTBIT_WALKING_BACK = '後';

Blockly.Msg.BOTBIT_MOONWALKER_HELPURL = '';
Blockly.Msg.BOTBIT_MOONWALKER_TOOLTIP = '推薦周期1000~2000, 幅度10~50';
Blockly.Msg.BOTBIT_MOONWALKER_MESSAGE0 = '舞步(moonwalker) 步數%2 周期%3 幅度%4 方向%1 ';
Blockly.Msg.BOTBIT_MOONWALKER_L = '左';
Blockly.Msg.BOTBIT_MOONWALKER_R = '右';

Blockly.Msg.BOTBIT_CRUSAITO_HELPURL = '';
Blockly.Msg.BOTBIT_CRUSAITO_TOOLTIP = '推薦步數2~10, 幅度10~50';
Blockly.Msg.BOTBIT_CRUSAITO_MESSAGE0 = '舞步(crusaito) 步數%2 周期%3 幅度%4 方向%1';
Blockly.Msg.BOTBIT_CRUSAITO_CW = '逆時針';
Blockly.Msg.BOTBIT_CRUSAITO_ANTICW = '順時針';

Blockly.Msg.BOTBIT_FLAPPING_HELPURL = '';
Blockly.Msg.BOTBIT_FLAPPING_TOOLTIP = '推薦步數5~15, 幅度10~30, 周期1000~2000';
Blockly.Msg.BOTBIT_FLAPPING_MESSAGE0 = '舞步(flapping) 步數%2 周期%3 幅度%4 方向%1';
Blockly.Msg.BOTBIT_FLAPPING_FORWARD = '前';
Blockly.Msg.BOTBIT_FLAPPING_BACK = '後';

Blockly.Msg.BOTBIT_HOME_HELPURL = '';
Blockly.Msg.BOTBIT_HOME_TOOLTIP = '';
Blockly.Msg.BOTBIT_HOME_MESSAGE0 = '機器人舞步初始化';

Blockly.Msg.BOTBIT_PIDtracking_HELPURL = 'http://wiki.labplus.cn/index.php?title=Bot:bit';
Blockly.Msg.BOTBIT_PIDtracking_TOOLTIP = '速度: 0~2000';
Blockly.Msg.BOTBIT_PIDtracking_MESSAGE0 = '校準並循跡 %1 kp %2 kd %3 速度 %4';

Blockly.Msg.LABPLUS_UART_SET_MIDI_VOL_HELPURL = 'http://wiki.labplus.cn/index.php?title=MIDI(%E7%94%B5%E5%AD%90%E7%90%B4)';
Blockly.Msg.LABPLUS_UART_SET_MIDI_VOL_TOOLTIP = '';
Blockly.Msg.LABPLUS_UART_SET_MIDI_VOL_MESSAGE0 = '設置MIDI模組音量為 %1';

//映射數字範圍，放在math目錄裏
Blockly.Msg.labplus_mapping_MESSAGE0 = '映射%1 從%2 %3到%4 %5'
Blockly.Msg.labplus_mapping_TOOLTIP = '在第1個數字框插入需要映射的變量，然後賦給另一個變量'
Blockly.Msg.labplus_mapping_HELPURL = ''


Blockly.Msg.JOINT_MIDI_PIANO = "平臺鋼琴"; //Acoustic Grand Piano
Blockly.Msg.JOINT_MIDI_BRIGHTACOUSTICPIANO = "亮音鋼琴";
Blockly.Msg.JOINT_MIDI_ELECTRICGRANDPIANO = "電鋼琴";
Blockly.Msg.JOINT_MIDI_HARPSICHORD = "大鍵琴";
Blockly.Msg.JOINT_MIDI_Celesta = "鋼片琴";
Blockly.Msg.JOINT_MIDI_Glockenspiel = "鐘琴";
Blockly.Msg.JOINT_MIDI_Musicalbox = "音樂盒";
Blockly.Msg.JOINT_MIDI_Marimba = "馬林巴琴";
Blockly.Msg.JOINT_MIDI_Xylophone = "木琴";
Blockly.Msg.JOINT_MIDI_TubularBell = "管鐘";
Blockly.Msg.JOINT_MIDI_Dulcimer = "洋琴";
Blockly.Msg.JOINT_Vibraphone = "顫音琴"; //Vibraphone
Blockly.Msg.JOINT_MIDI_ORGAN = "音栓風琴"; //Drawbar Organ
Blockly.Msg.JOINT_Acoustic_Guitar = "木吉他"; //Acoustic Guitar
Blockly.Msg.JOINT_Electric_Guitar = "電吉他"; //Electric Guitar
Blockly.Msg.JOINT_Acoustic_Bass = "民謠貝斯";  //Acoustic Bass
Blockly.Msg.JOINT_String_Ensemble = "弦樂合奏";  //String Ensemble
Blockly.Msg.JOINT_Violin = "小提琴";  //Violin
Blockly.Msg.JOINT_Trumpet = "小號";  //Trumpet
Blockly.Msg.JOINT_Sax = "薩克斯";  //Sax
Blockly.Msg.JOINT_Steel_Drums = "鋼鼓";  //Steel Drums
Blockly.Msg.JOINT_Lead = "合成音主旋律";  //Lead
Blockly.Msg.JOINT_Pad = "合成音襯底";  //Pad

Blockly.Msg.LABPLUS_PLAY_BUZZER_NOTE_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%9C%82%E9%B8%A3%E5%99%A8';
Blockly.Msg.LABPLUS_PLAY_BUZZER_NOTE_TOOLTIP = '';
Blockly.Msg.LABPLUS_PLAY_BUZZER_NOTE_MESSAGE0 ='播放音調 %1';

Blockly.Msg.Carbit_init_MESSAGE0 = 'CarBit初始化';
Blockly.Msg.Carbit_init_TOOLTIP = '';
Blockly.Msg.Carbit_init_HELPURL = 'http://wiki.labplus.cn/index.php?title=Car:bit';

Blockly.Msg.Carbit_setLeftMotor_MESSAGE0 = '設置 B2 電機速度 %1';
Blockly.Msg.Carbit_setLeftMotor_TOOLTIP = '範圍：-100~100';
Blockly.Msg.Carbit_setLeftMotor_HELPURL = 'http://wiki.labplus.cn/index.php?title=Car:bit';

Blockly.Msg.Carbit_setRightMotor_MESSAGE0 = '設置 B1 電機速度 %1';
Blockly.Msg.Carbit_setRightMotor_TOOLTIP = '範圍：-100~100';
Blockly.Msg.Carbit_setRightMotor_HELPURL = 'http://wiki.labplus.cn/index.php?title=Car:bit';

Blockly.Msg.Carbit_analog_light_HELPURL = 'http://wiki.labplus.cn/index.php?title=Car:bit';
Blockly.Msg.Carbit_analog_light_TOOLTIP = 'Q3對應Pin1，Q4對應Pin2';
Blockly.Msg.Carbit_analog_light_MESSAGE0 = '%1 模擬光線的值';

Blockly.Msg.Carbit_Speed_U10_HELPURL = 'http://wiki.labplus.cn/index.php?title=Car:bit';
Blockly.Msg.Carbit_Speed_U10_TOOLTIP = '對應U10';
Blockly.Msg.Carbit_Speed_U10_MESSAGE0 = '左輪速度';

Blockly.Msg.Carbit_Speed_U11_HELPURL = 'http://wiki.labplus.cn/index.php?title=Car:bit';
Blockly.Msg.Carbit_Speed_U11_TOOLTIP = '對應U11';
Blockly.Msg.Carbit_Speed_U11_MESSAGE0 = '右輪速度';

Blockly.Msg.Carbit_Distance_HELPURL= 'http://wiki.labplus.cn/index.php?title=Car:bit';
Blockly.Msg.Carbit_Distance_TOOLTIP= '';
Blockly.Msg.Carbit_Distance_MESSAGE0= '超聲波的值';

Blockly.Msg.Carbit_tracking_HELPURL = 'http://wiki.labplus.cn/index.php?title=Car:bit';
Blockly.Msg.Carbit_tracking_TOOLTIP = '';
Blockly.Msg.Carbit_tracking_MESSAGE0 = '循跡參數 %1 直行速度 %2 最大限速 %3 轉彎延時 %5 轉彎速度系數 %4 ';

/* Blockly.Msg.LABPLUS_OFF_BUZZER_NOTE_HELPURL = 'http://wiki.labplus.cn/index.php?title=%E8%9C%82%E9%B8%A3%E5%99%A8';
Blockly.Msg.LABPLUS_OFF_BUZZER_NOTE_TOOLTIP = '';
Blockly.Msg.LABPLUS_OFF_BUZZER_NOTE_MESSAGE0 = '蜂鳴器%1關閉音調 %2' */


/* Blockly.Msg.JOINT_Bass_Drum = "大鼓";  //Bass Drum
Blockly.Msg.JOINT_Snare_Drum = "小鼓";  //Snare Drum
Blockly.Msg.JOINT_Closed_Hi_hat = "閉合開合鈸";  //Closed Hi-hat
Blockly.Msg.JOINT_Open_Hi_hat = "開放開合鈸";  //Open Hi-hat
Blockly.Msg.JOINT_Low_Tom = "低音筒鼓";  //Low Tom
Blockly.Msg.JOINT_High_Tom = "高音筒鼓";  //High Tom
Blockly.Msg.JOINT_Tambourine = "鈴鼓";  //Tambourine
Blockly.Msg.JOINT_Crash_Cymbal = "強音鈸";  //Crash Cymbal
Blockly.Msg.JOINT_Ride_Cymbal = "打點鈸";  //Ride Cymbal
Blockly.Msg.JOINT_Mute_High_Conga = "高音康加鼓";  //Mute High Conga
Blockly.Msg.JOINT_Low_Conga = "低音康加鼓";  //Low Conga
Blockly.Msg.JOINT_Maracas = "沙錘";  //Maracas
Blockly.Msg.JOINT_Claves = "擊木";  //Claves */