cocorobolx/blockly/msg/js/zh-hant.js

// This file was automatically generated.  Do not modify.

'use strict';

goog.provide('Blockly.Msg.zh.hant');

goog.require('Blockly.Msg');

Blockly.Msg.ADD_COMMENT = "加入註解";
Blockly.Msg.ARD_ANALOGREAD = "讀取模擬接口#";
Blockly.Msg.ARD_ANALOGREAD_TIP = "返回0到1024中的一個值";
Blockly.Msg.ARD_ANALOGWRITE = "設定模擬接口#";
Blockly.Msg.ARD_ANALOGWRITE_TIP = "將0到255之間的一個模擬值寫入到特定的脈寬調製端口";
Blockly.Msg.ARD_BUILTIN_LED = "設定內置LED燈";
Blockly.Msg.ARD_BUILTIN_LED_TIP = "設定Arduino版上的內置LED燈狀態爲開或者關";
Blockly.Msg.ARD_COMPONENT_WARN1 = "A %1 configuration block with the same %2 name must be added to use this block!"; // untranslated
Blockly.Msg.ARD_DEFINE = "Define"; // untranslated
Blockly.Msg.ARD_DIGITALREAD = "讀取數字接口#";
Blockly.Msg.ARD_DIGITALREAD_TIP = "從壹端口讀取數字值：高電平或低電平";
Blockly.Msg.ARD_DIGITALWRITE = "設定數字接口#";
Blockly.Msg.ARD_DIGITALWRITE_TIP = "將數字值高電平或低電平寫入特定端口";
Blockly.Msg.ARD_FUN_RUN_LOOP = "CocoBlockly不斷執行:";
Blockly.Msg.ARD_FUN_RUN_SETUP = "CocoBlockly先執行:";
Blockly.Msg.ARD_FUN_RUN_TIP = "定義Arduino setup() 和 loop() 函數。";
Blockly.Msg.ARD_HIGH = "高";
Blockly.Msg.ARD_HIGHLOW_TIP = "Set a pin state logic High or Low."; // untranslated
Blockly.Msg.ARD_LOW = "低";
Blockly.Msg.ARD_MAP = "映射";
Blockly.Msg.ARD_MAP_TIP = "Re-maps a number from [0-1024] to another."; // untranslated
Blockly.Msg.ARD_MAP_VAL = "值從[0-";
Blockly.Msg.ARD_NOTONE_PIN = "No tone"; // untranslated
Blockly.Msg.ARD_NOTONE_PIN_TIP = "Stop generating a tone on a pin"; // untranslated
Blockly.Msg.ARD_PIN_WARN1 = "Pin %1 is needed for %2 as pin %3. Already used as %4."; // untranslated
Blockly.Msg.ARD_PULSEON = "脈衝從接口#";
Blockly.Msg.ARD_PULSEREAD = "讀取";
Blockly.Msg.ARD_PULSETIMEOUT = "超時時間：";
Blockly.Msg.ARD_PULSETIMEOUT_MS = ""; // untranslated
Blockly.Msg.ARD_PULSETIMEOUT_TIP = "測量所選接口上脈衝的持續時間，如果其在超時時間內";
Blockly.Msg.ARD_PULSE_TIP = "測量所選接口上脈衝的持續時間";
Blockly.Msg.ARD_PWMWRITE = "設定PWM接口#";
Blockly.Msg.ARD_SERIAL_AVAILABLE = "avalible"; // untranslated
Blockly.Msg.ARD_SERIAL_BPS = "比特/秒";
Blockly.Msg.ARD_SERIAL_PRINT = "打印";
Blockly.Msg.ARD_SERIAL_PRINT_NEWLINE = "添加新行";
Blockly.Msg.ARD_SERIAL_PRINT_TIP = "將數據以可讀的ASCII文本形式打印到控制檯或串行端口";
Blockly.Msg.ARD_SERIAL_PRINT_WARN = "Serial相關的初始化積木需要被添加";
Blockly.Msg.ARD_SERIAL_READ = "讀取";
Blockly.Msg.ARD_SERIAL_SETUP = "設定";
Blockly.Msg.ARD_SERIAL_SETUP_TIP = "選擇特定的串行外設的速度";
Blockly.Msg.ARD_SERIAL_SPEED = "速度爲";
Blockly.Msg.ARD_SERIAL_WRITE = "寫出";
Blockly.Msg.ARD_SERVO_READ = "讀取舵機訊息，設定接口爲PIN#";
Blockly.Msg.ARD_SERVO_READ_TIP = "讀取舵機的角度";
Blockly.Msg.ARD_SERVO_SETUP = "舵機初始化";
Blockly.Msg.ARD_SERVO_WRITE = "定義舵機接口爲";
Blockly.Msg.ARD_SERVO_WRITE_DEG_180 = "度 (0~180)";
Blockly.Msg.ARD_SERVO_WRITE_TIP = "設定舵機轉動壹定的角度";
Blockly.Msg.ARD_SERVO_WRITE_TO = "設定其轉動角度爲";
Blockly.Msg.ARD_SPI_SETUP = "設定";
Blockly.Msg.ARD_SPI_SETUP_CONF = "配置";
Blockly.Msg.ARD_SPI_SETUP_DIVIDE = "時鐘分頻";
Blockly.Msg.ARD_SPI_SETUP_LSBFIRST = "LSBFIRST"; // untranslated
Blockly.Msg.ARD_SPI_SETUP_MODE = "SPI模式（空 - 邊界）";
Blockly.Msg.ARD_SPI_SETUP_MODE0 = "0 (Low - Falling)"; // untranslated
Blockly.Msg.ARD_SPI_SETUP_MODE1 = "1 (Low - Rising)"; // untranslated
Blockly.Msg.ARD_SPI_SETUP_MODE2 = "2 (High - Falling)"; // untranslated
Blockly.Msg.ARD_SPI_SETUP_MODE3 = "3 (High - Rising)"; // untranslated
Blockly.Msg.ARD_SPI_SETUP_MSBFIRST = "MSBFIRST"; // untranslated
Blockly.Msg.ARD_SPI_SETUP_SHIFT = "數據傳輸";
Blockly.Msg.ARD_SPI_SETUP_TIP = "配置SPI外設";
Blockly.Msg.ARD_SPI_TRANSRETURN_TIP = "Send a SPI message to an specified slave device and get data back."; // untranslated
Blockly.Msg.ARD_SPI_TRANS_NONE = "none"; // untranslated
Blockly.Msg.ARD_SPI_TRANS_SLAVE = "來控制接口";
Blockly.Msg.ARD_SPI_TRANS_TIP = "Send a SPI message to an specified slave device."; // untranslated
Blockly.Msg.ARD_SPI_TRANS_VAL = "轉換";
Blockly.Msg.ARD_SPI_TRANS_WARN1 = "A setup block for %1 must be added to the workspace to use this block!"; // untranslated
Blockly.Msg.ARD_SPI_TRANS_WARN2 = "Old pin value %1 is no longer available."; // untranslated
Blockly.Msg.ARD_STEPPER_COMPONENT = "stepper"; // untranslated
Blockly.Msg.ARD_STEPPER_DEFAULT_NAME = "MyStepper"; // untranslated
Blockly.Msg.ARD_STEPPER_MOTOR = "步進馬達";
Blockly.Msg.ARD_STEPPER_PIN1 = "接口1#'：";
Blockly.Msg.ARD_STEPPER_PIN2 = "接口2#'：";
Blockly.Msg.ARD_STEPPER_REVOLVS = "每轉有多少步：";
Blockly.Msg.ARD_STEPPER_SETUP = "設定步進馬達名爲：";
Blockly.Msg.ARD_STEPPER_SETUP_TIP = "配置步進馬達接口排列和其他設定";
Blockly.Msg.ARD_STEPPER_SPEED = "設定轉速（轉/分）爲";
Blockly.Msg.ARD_STEPPER_STEP = "移動步進馬達";
Blockly.Msg.ARD_STEPPER_STEPS = "步";
Blockly.Msg.ARD_STEPPER_STEP_TIP = "將步進馬達轉動壹定數量的步數";
Blockly.Msg.ARD_TIME_CHRONO_CHECK = "當碼錶停至";
Blockly.Msg.ARD_TIME_CHRONO_CHECK1 = "毫秒時";
Blockly.Msg.ARD_TIME_CHRONO_ELAPSED = "碼錶已過去的時間";
Blockly.Msg.ARD_TIME_CHRONO_RESET = "重置碼錶";
Blockly.Msg.ARD_TIME_CHRONO_SETUP = "碼錶初始化";
Blockly.Msg.ARD_TIME_DELAY = "等待";
Blockly.Msg.ARD_TIME_DELAY_MICROS = "微秒";
Blockly.Msg.ARD_TIME_DELAY_MICRO_TIP = "等待壹定的時間（以微秒爲單位）";
Blockly.Msg.ARD_TIME_DELAY_TIP = "等待壹定的時間（以毫秒爲單位）";
Blockly.Msg.ARD_TIME_DO = "執行";
Blockly.Msg.ARD_TIME_DO_MS = "執行";
Blockly.Msg.ARD_TIME_EVERY = "每隔";
Blockly.Msg.ARD_TIME_EVERY_MS = "每隔";
Blockly.Msg.ARD_TIME_INF = "永久等待（結束程序）";
Blockly.Msg.ARD_TIME_INF_TIP = "無限期等待，即停止程序";
Blockly.Msg.ARD_TIME_MICROS = "當前已過時間（微秒）";
Blockly.Msg.ARD_TIME_MICROS_TIP = "返回自Arduino版開始執行當前程序以來的微秒數，必須以長整數型儲存";
Blockly.Msg.ARD_TIME_MILLIS = "當前已過時間（毫秒）";
Blockly.Msg.ARD_TIME_MILLIS_TIP = "返回自Arduino版開始執行當前程序以來的毫秒數，必須以長整數型儲存";
Blockly.Msg.ARD_TIME_MS = "毫秒";
Blockly.Msg.ARD_TIME_SECOND = "秒";
Blockly.Msg.ARD_TIME_SECOND_MS = "毫秒";
Blockly.Msg.ARD_TONE_FREQ = "frequency"; // untranslated
Blockly.Msg.ARD_TONE_PIN = "Tone PIN#"; // untranslated
Blockly.Msg.ARD_TONE_PIN_TIP = "Generate audio tones on a pin"; // untranslated
Blockly.Msg.ARD_TYPE_ARRAY = "Array"; // untranslated
Blockly.Msg.ARD_TYPE_BOOL = "Boolean"; // untranslated
Blockly.Msg.ARD_TYPE_CHAR = "Character"; // untranslated
Blockly.Msg.ARD_TYPE_CHILDBLOCKMISSING = "ChildBlockMissing"; // untranslated
Blockly.Msg.ARD_TYPE_DECIMAL = "Decimal"; // untranslated
Blockly.Msg.ARD_TYPE_LONG = "Large Number"; // untranslated
Blockly.Msg.ARD_TYPE_NULL = "Null"; // untranslated
Blockly.Msg.ARD_TYPE_NUMBER = "Number"; // untranslated
Blockly.Msg.ARD_TYPE_SHORT = "Short Number"; // untranslated
Blockly.Msg.ARD_TYPE_TEXT = "Text"; // untranslated
Blockly.Msg.ARD_TYPE_UNDEF = "Undefined"; // untranslated
Blockly.Msg.ARD_VAR_AS = "爲";
Blockly.Msg.ARD_VAR_AS_TIP = "Sets a value to a specific type"; // untranslated
Blockly.Msg.ARD_WRITE_TO = "爲";
Blockly.Msg.AUTH = "請授權這個應用程式以保存您的作品並共享。";
Blockly.Msg.BASIC_AS = "as"; // untranslated
Blockly.Msg.BASIC_BLACK_OUT = "Black out"; // untranslated
Blockly.Msg.BASIC_BRTN = "Brightness"; // untranslated
Blockly.Msg.BASIC_BUZZER_PLAY = "Buzzer plays "; // untranslated
Blockly.Msg.BASIC_BUZZER_SETUP = "Buzzer Setup"; // untranslated
Blockly.Msg.BASIC_COUNTER_SETTING = "按鈕為";
Blockly.Msg.BASIC_COUNTER_SETUP = "設定一個計數器 ";
Blockly.Msg.BASIC_FOR = "for"; // untranslated
Blockly.Msg.BASIC_FROM = "from"; // untranslated
Blockly.Msg.BASIC_HZ = "Hz"; // untranslated
Blockly.Msg.BASIC_IF_SWITCH = "If switch "; // untranslated
Blockly.Msg.BASIC_IS = " is "; // untranslated
Blockly.Msg.BASIC_LIGHT_PIN = "Light Pin#"; // untranslated
Blockly.Msg.BASIC_LIGHT_WARNING = "亮度值必須在0到255之間";
Blockly.Msg.BASIC_MUTE = "Mute"; // untranslated
Blockly.Msg.BASIC_NOLCD = "關閉在接口%1上的燈光";
Blockly.Msg.BASIC_NOTONE = "關閉在接口%1上的音調";
Blockly.Msg.BASIC_NOTONE_TIP = "關閉所選接口上的音調輸出";
Blockly.Msg.BASIC_PIN_NUM = "Pin#"; // untranslated
Blockly.Msg.BASIC_READBUTTON = "讀取在接口%1上開關的狀態";
Blockly.Msg.BASIC_READCOUNTER = "讀取計數器的數值 計數按鈕為%1";
Blockly.Msg.BASIC_READKNOB = "讀取在接口%1上電位器的數值";
Blockly.Msg.BASIC_SET = "Set"; // untranslated
Blockly.Msg.BASIC_SETANALOGLED = "設定在接口%1上的燈光亮度為%2";
Blockly.Msg.BASIC_SETDIGITALLED = "打開在接口%1上的燈光";
Blockly.Msg.BASIC_SETTONE = "設定在接口%1上的音調頻率為%2";
Blockly.Msg.BASIC_SET_PIN = "Set Pin#"; // untranslated
Blockly.Msg.BASIC_TO = "to"; // untranslated
Blockly.Msg.BASIC_TONE_TIP = "設定接口上的音調頻率爲31到65535中某個特定頻率";
Blockly.Msg.BASIC_TONE_WARNING = "頻率值必須在31到65535之間";
Blockly.Msg.BLUE = "藍";
Blockly.Msg.BLUETOOTH_INTERACTION_SET_CONTENT = "設定序列埠波特率為:";
Blockly.Msg.BLUETOOTH_INTERACTION_TITLE = "藍芽模組進入 AT 配置模式";
Blockly.Msg.BLUETOOTH_INTERCOMMS_DATA = "data";
Blockly.Msg.BLUETOOTH_INTERCOMMS_RECEIVEMSG = "接收數據";
Blockly.Msg.BLUETOOTH_INTERCOMMS_RECEIVEMSG_ISSUCCESS = "接收數據成功";
Blockly.Msg.BLUETOOTH_INTERCOMMS_RECEIVE_GET_LINE2 = "獲取第";
Blockly.Msg.BLUETOOTH_INTERCOMMS_RECEIVE_GET_LINE2_2 = "位的數據";
Blockly.Msg.BLUETOOTH_INTERCOMMS_RECEIVE_GET_LINE3 = "位的數據，並設置類型為";
Blockly.Msg.BLUETOOTH_INTERCOMMS_RECEIVE_GET_LINE4 = "";
Blockly.Msg.BLUETOOTH_INTERCOMMS_RECEIVE_LINE3 = "長度為";
Blockly.Msg.BLUETOOTH_INTERCOMMS_SENDMSG = "發送數據";
Blockly.Msg.BLUETOOTH_INTERCOMMS_SETUP = "藍牙對藍牙通信";
Blockly.Msg.BLUETOOTH_INTERCOMMS_SETUP1 = "對藍牙通信";
Blockly.Msg.BLUETOOTH_INTERCOMMS_SETUP2 = "初始化";
Blockly.Msg.BLUETOOTH_LIST_RECEIVED = "已接收到的陣列";
Blockly.Msg.BLUETOOTH_LIST_RECEIVED1 = "中第";
Blockly.Msg.BLUETOOTH_LIST_RECEIVED2 = "位的值";
Blockly.Msg.BLUETOOTH_NUMBER_RECEIVED = "已接收到的數字";
Blockly.Msg.BLUETOOTH_PAIRING_BIND_ADDR = "綁定從屬裝置地址:";
Blockly.Msg.BLUETOOTH_PAIRING_MASTER = "藍芽配對: 主機裝置設定";
Blockly.Msg.BLUETOOTH_PAIRING_SETTING_BAUDRATE = "設定波特率:";
Blockly.Msg.BLUETOOTH_PAIRING_SETTING_TIMEOUT = "設定延時:";
Blockly.Msg.BLUETOOTH_PAIRING_SLAVE = "藍芽配對: 從屬裝置設定";
Blockly.Msg.BLUETOOTH_SETUP = "儅藍牙接收到";
Blockly.Msg.BLUETOOTH_SETUP_DATA_SET = "設定";
Blockly.Msg.BLUETOOTH_SETUP_DO = "並且做";
Blockly.Msg.BLUETOOTH_SETUP_LIST_SETTING = "長度為";
Blockly.Msg.BLUETOOTH_SETUP_OPT1 = "壹串字串";
Blockly.Msg.BLUETOOTH_SETUP_OPT2 = "一個數字";
Blockly.Msg.BLUETOOTH_SETUP_OPT3 = "一個陣列";
Blockly.Msg.BLUETOOTH_SETUP_SET = "設定波特率";
Blockly.Msg.BLUETOOTH_SETUP_TO = "為接收到的訊息";
Blockly.Msg.BLUETOOTH_TEXT_RECEIVED = "已接收到的字串";
Blockly.Msg.BLYNK_AUTH = "認證密匙: ";
Blockly.Msg.BLYNK_CONNECT = "當Blynk連接成功";
Blockly.Msg.BLYNK_CREATE_WITH_CONTAINER_TITLE_ADD = "Data";
Blockly.Msg.BLYNK_CREATE_WITH_ITEM_TITLE = "item";
Blockly.Msg.BLYNK_DATA = "data";
Blockly.Msg.BLYNK_GET_DATANAME = "從";
Blockly.Msg.BLYNK_GET_DATANAME1 = "獲得";
Blockly.Msg.BLYNK_GET_DATANAME2 = "數據";
Blockly.Msg.BLYNK_GET_INDEX = "第";
Blockly.Msg.BLYNK_GET_INDEX1 = "位的數據";
Blockly.Msg.BLYNK_GET_OF = "獲得數據";
Blockly.Msg.BLYNK_GET_OF1 = "獲得";
Blockly.Msg.BLYNK_GET_OF2 = "的數據";
Blockly.Msg.BLYNK_GPS_ALTITUDE = "高度(海拔)";
Blockly.Msg.BLYNK_GPS_LATITUDE = "緯度";
Blockly.Msg.BLYNK_GPS_LONGITUDE = "經度";
Blockly.Msg.BLYNK_GPS_SPEED = "速度";
Blockly.Msg.BLYNK_LOG = "BLYNK_LOG";
Blockly.Msg.BLYNK_PW = "WiFi密碼: ";
Blockly.Msg.BLYNK_READ = "當Blynk請求";
Blockly.Msg.BLYNK_READ1 = "數據";
Blockly.Msg.BLYNK_SELECT = "選擇";
Blockly.Msg.BLYNK_SETUP = "BLYNK初始化";
Blockly.Msg.BLYNK_SSID = "WiFi名稱: ";
Blockly.Msg.BLYNK_TIME_DO = "執行";
Blockly.Msg.BLYNK_TIME_SECOND = "秒";
Blockly.Msg.BLYNK_TIME_SETTING = "設置計時器: 每隔";
Blockly.Msg.BLYNK_VIRTUALWRITE = "發送數據到";
Blockly.Msg.BLYNK_VIRTUALWRITE_DATA = "Data:";
Blockly.Msg.BLYNK_WIFI = "連接WiFi網絡";
Blockly.Msg.BLYNK_WRITE = "從";
Blockly.Msg.BLYNK_WRITE1 = "獲取數據";
Blockly.Msg.BLYNK_WRITE_VARIABLE = "存到";
Blockly.Msg.BLYNK_WRITE_VARLENGTH = "長度";
Blockly.Msg.CHANGE_VALUE_TITLE = "修改值:";
Blockly.Msg.CHAT = "與您的合作者洽談藉由在此框輸入！";
Blockly.Msg.CLEAN_UP = "整理積木";
Blockly.Msg.CLOUDDATA_CREATE_WITH_CONTAINER_TITLE_ADD = "key[]";
Blockly.Msg.CLOUDDATA_CREATE_WITH_INPUT_WITH = "添加";
Blockly.Msg.CLOUDDATA_CREATE_WITH_ITEM_TITLE = "value";
Blockly.Msg.CLOUDDATA_GENERATOR_DATA = "生成數據";
Blockly.Msg.CLOUDDATA_PARSE_JSON = "的數據從";
Blockly.Msg.CLOUDDATA_PARSE_KEY = "解析得到名爲";
Blockly.Msg.CLOUDDATA_PARSE_PRETTYPRINT_DISPLAY = "獲得生成的數據";
Blockly.Msg.CLOUDDATA_PARSE_SETUP_INIT = "數據解析初始化為";
Blockly.Msg.CLOUDDATA_PARSE_SETUP_PAYLOAD = "解析內容";
Blockly.Msg.CLOUDDATA_PARSE_TYPE = "類型爲";
Blockly.Msg.CO2SENSOR_GET_CO2 = "獲取二氧化碳濃度數值（單位：ppm）";
Blockly.Msg.CO2SENSOR_GET_TVOC = "獲取 TVOC（揮發性有機物）數值";
Blockly.Msg.CO2SENSOR_SETUP = "CCS811 空氣質量感測器初始化";
Blockly.Msg.CO2SENSOR_SETUP_SCL = "SCL 引腳接在:";
Blockly.Msg.CO2SENSOR_SETUP_SDA = "SDA 引腳接在:";
Blockly.Msg.COCOCLOUD_CREATE_WITH_CONTAINER_TITLE_ADD = "LIST";
Blockly.Msg.COCOCLOUD_CREATE_WITH_ITEM_TITLE = "Event";
Blockly.Msg.COCOCLOUD_GET = "向項目";
Blockly.Msg.COCOCLOUD_GET1 = "獲取數據";
Blockly.Msg.COCOCLOUD_GETPAYLOAD = "從項目獲取到的數據";
Blockly.Msg.COCOCLOUD_POST = "發送到項目";
Blockly.Msg.COCOCLOUD_POST_DATA = "數據";
Blockly.Msg.COCOCLOUD_TIME_DAY = "日";
Blockly.Msg.COCOCLOUD_TIME_GETDATE = "獲取";
Blockly.Msg.COCOCLOUD_TIME_GETTIME = "獲取";
Blockly.Msg.COCOCLOUD_TIME_HOUR = "時";
Blockly.Msg.COCOCLOUD_TIME_MINUTE = "分";
Blockly.Msg.COCOCLOUD_TIME_MONTH = "月份";
Blockly.Msg.COCOCLOUD_TIME_SECOND = "秒";
Blockly.Msg.COCOCLOUD_TIME_SETUP = "世界時間";
Blockly.Msg.COCOCLOUD_TIME_YEAR = "年份";
Blockly.Msg.COCOCLOUD_TITLE = "Web服務 CocoCloud";
Blockly.Msg.COLLAPSE_ALL = "收合積木";
Blockly.Msg.COLLAPSE_BLOCK = "收合積木";
Blockly.Msg.COLOR = "顔色";
Blockly.Msg.COLORANALYZER_SETUP = "顔色分析設定";
Blockly.Msg.COLOUR_BLEND_COLOUR1 = "顏色 1";
Blockly.Msg.COLOUR_BLEND_COLOUR2 = "顏色 2";
Blockly.Msg.COLOUR_BLEND_HELPURL = "http://meyerweb.com/eric/tools/color-blend/"; // untranslated
Blockly.Msg.COLOUR_BLEND_RATIO = "比例";
Blockly.Msg.COLOUR_BLEND_TITLE = "混合";
Blockly.Msg.COLOUR_BLEND_TOOLTIP = "透過一個比率 (0.0-1.0)來混合兩種顏色。";
Blockly.Msg.COLOUR_PICKER_HELPURL = "https://zh.wikipedia.org/wiki/顏色";
Blockly.Msg.COLOUR_PICKER_TOOLTIP = "從調色板中選擇壹種顏色。";
Blockly.Msg.COLOUR_RANDOM_HELPURL = "http://randomcolour.com"; // untranslated
Blockly.Msg.COLOUR_RANDOM_TITLE = "隨機顏色";
Blockly.Msg.COLOUR_RANDOM_TOOLTIP = "隨機選擇壹種顏色。";
Blockly.Msg.COLOUR_RGB_BLUE = "藍";
Blockly.Msg.COLOUR_RGB_GREEN = "綠";
Blockly.Msg.COLOUR_RGB_HELPURL = "http://www.december.com/html/spec/colorper.html"; // untranslated
Blockly.Msg.COLOUR_RGB_RED = "紅";
Blockly.Msg.COLOUR_RGB_TITLE = "顏色";
Blockly.Msg.COLOUR_RGB_TOOLTIP = "透過指定紅、綠、 藍色的值來建立壹種顏色。所有的值必須介於 0 和 100 之間。";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_HELPURL = "https://github.com/google/blockly/wiki/Loops#loop-termination-blocks"; // untranslated
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_OPERATOR_BREAK = "停止 迴圈";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_OPERATOR_CONTINUE = "繼續下一個 迴圈";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_TOOLTIP_BREAK = "離開當前的 迴圈";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_TOOLTIP_CONTINUE = "跳過這個迴圈的其餘步驟，並繼續下壹次的迴圈運算。";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_WARNING = "警告： 此積木僅可用於迴圈內。";
Blockly.Msg.CONTROLS_FOREACH_HELPURL = "https://github.com/google/blockly/wiki/Loops#for-each"; // untranslated
Blockly.Msg.CONTROLS_FOREACH_TITLE = "在陣列 %2 中以 %1 遍歷每個項目";
Blockly.Msg.CONTROLS_FOREACH_TOOLTIP = "遍歷每個陣列中的項目，將變數 '%1' 設定到該項目中，然後執行某些語句";
Blockly.Msg.CONTROLS_FOR_HELPURL = "https://github.com/google/blockly/wiki/Loops#count-with"; // untranslated
Blockly.Msg.CONTROLS_FOR_TITLE = "使用 %1 從範圍 %2 到 %3 每隔 %4";
Blockly.Msg.CONTROLS_FOR_TOOLTIP = "從起始數到結尾數中取出變數 \"%1\" 的值，按指定的時間間隔，執行指定的積木。";
Blockly.Msg.CONTROLS_IF_ELSEIF_TOOLTIP = "將條件添加到'如果'積木。";
Blockly.Msg.CONTROLS_IF_ELSE_TOOLTIP = "加入一個最終，所有條件下都都執行的區塊到'如果'積木中";
Blockly.Msg.CONTROLS_IF_HELPURL = "https://github.com/google/blockly/wiki/IfElse"; // untranslated
Blockly.Msg.CONTROLS_IF_IF_TOOLTIP = "添加、 刪除或重新排列各區塊來此重新配置這個'如果'積木。";
Blockly.Msg.CONTROLS_IF_MSG_ELSE = "否則";
Blockly.Msg.CONTROLS_IF_MSG_ELSEIF = "否則如果";
Blockly.Msg.CONTROLS_IF_MSG_IF = "如果";
Blockly.Msg.CONTROLS_IF_TOOLTIP_1 = "當值為真時，執行壹些語句";
Blockly.Msg.CONTROLS_IF_TOOLTIP_2 = "當值為真時，執行首個語句，否則則執行第二個語句";
Blockly.Msg.CONTROLS_IF_TOOLTIP_3 = "如果首個值為真，則執行首個語句。否則當第二個值為真時，則執行第二個語句";
Blockly.Msg.CONTROLS_IF_TOOLTIP_4 = "如果首個值為真，則執行首個語句。否則當第二個值為真時，則執行第二個語句。如果前幾個敘述都不為真，則執行最後一個語句";
Blockly.Msg.CONTROLS_REPEAT_HELPURL = "https://zh.wikipedia.org/wiki/For迴圈";
Blockly.Msg.CONTROLS_REPEAT_INPUT_DO = "執行";
Blockly.Msg.CONTROLS_REPEAT_TITLE = "重複 %1 次";
Blockly.Msg.CONTROLS_REPEAT_TOOLTIP = "多次執行壹些語句";
Blockly.Msg.CONTROLS_WHILEUNTIL_HELPURL = "https://github.com/google/blockly/wiki/Loops#repeat"; // untranslated
Blockly.Msg.CONTROLS_WHILEUNTIL_OPERATOR_UNTIL = "重複 直到";
Blockly.Msg.CONTROLS_WHILEUNTIL_OPERATOR_WHILE = "重複 當";
Blockly.Msg.CONTROLS_WHILEUNTIL_TOOLTIP_UNTIL = "當值為否時，執行壹些語句";
Blockly.Msg.CONTROLS_WHILEUNTIL_TOOLTIP_WHILE = "當值為真時，執行壹些語句";
Blockly.Msg.DELETE_ALL_BLOCKS = "刪除共 %1 塊積木？";
Blockly.Msg.DELETE_BLOCK = "刪除積木";
Blockly.Msg.DELETE_X_BLOCKS = "刪除 %1 塊積木";
Blockly.Msg.DISABLE_BLOCK = "停用積木";
Blockly.Msg.DUPLICATE_BLOCK = "複製";
Blockly.Msg.ENABLE_BLOCK = "啟用積木";
Blockly.Msg.ENCODER_GETROTATIONSPEED = "讀取碼盤數值";
Blockly.Msg.ENCODER_SETUP = "碼盤初始化·";
Blockly.Msg.ENCODER_SETUP_1 = "設定中斷引腳";
Blockly.Msg.ENV_AS = "as"; // untranslated
Blockly.Msg.ENV_BLUE_PIN = "藍 從接口";
Blockly.Msg.ENV_BUZZER_ALARM = "Buzzer Alarm"; // untranslated
Blockly.Msg.ENV_CRITICAL_VAL = "When the critical value of"; // untranslated
Blockly.Msg.ENV_DO = "Do"; // untranslated
Blockly.Msg.ENV_GREEN_PIN = "綠 從接口";
Blockly.Msg.ENV_REACHES = "reaches"; // untranslated
Blockly.Msg.ENV_RED_PIN = "紅 從接口 ";
Blockly.Msg.ENV_SENSOR_HUMID = "讀取濕度的數值從接口 ";
Blockly.Msg.ENV_SENSOR_HUMIDITY = "濕度";
Blockly.Msg.ENV_SENSOR_LIGHT = "讀取光照的數值從接口 ";
Blockly.Msg.ENV_SENSOR_MIC = "讀取聲音的數值從接口 ";
Blockly.Msg.ENV_SENSOR_READ = "讀取數值從";
Blockly.Msg.ENV_SENSOR_READTEMP = "讀取溫度的數值從接口 ";
Blockly.Msg.ENV_SENSOR_SET_RGB = "設定RGB燈光";
Blockly.Msg.ENV_SENSOR_SOUND = "聲音";
Blockly.Msg.ENV_SENSOR_TEMPUNIT = "設定單位為";
Blockly.Msg.ENV_SENSOR_UNITC = "攝氏度";
Blockly.Msg.ENV_SENSOR_UNITF = "華氏度";
Blockly.Msg.ENV_SET = "Set"; // untranslated
Blockly.Msg.ENV_SETRGB_B = "藍 從接口";
Blockly.Msg.ENV_SETRGB_G = "綠 從接口";
Blockly.Msg.ENV_SETRGB_R = "紅 從接口 ";
Blockly.Msg.ENV_SETUP = "環境感應設定";
Blockly.Msg.ENV_SET_TEMP = "Set temperature as "; // untranslated
Blockly.Msg.ENV_SET_TEMP_UNIT = "Set unit as "; // untranslated
Blockly.Msg.EXPAND_ALL = "展開積木";
Blockly.Msg.EXPAND_BLOCK = "展開積木";
Blockly.Msg.EXPORTPNG = "導出PNG快照";
Blockly.Msg.EXPORTXML = "導出XML文件";
Blockly.Msg.EXTERNAL_INPUTS = "多行輸入";
Blockly.Msg.Friday = "周五";
Blockly.Msg.GPS_LATITUDE = "獲取緯度";
Blockly.Msg.GPS_LONGITUDE = "獲取經度";
Blockly.Msg.GPS_SETUP = "GPS 初始化";
Blockly.Msg.GREEN = "綠";
Blockly.Msg.HELP = "說明";
Blockly.Msg.HID_KEYBOARD_PRESS = "設定鍵盤: 按下";
Blockly.Msg.HID_KEYBOARD_RELEASE = "設定鍵盤: 釋放";
Blockly.Msg.HID_KEYBOARD_RELEASEALL = "設定鍵盤: 釋放全部";
Blockly.Msg.HID_MOUSE_CLICK = "設定鼠標: 點擊";
Blockly.Msg.HID_MOUSE_CLICK_LEFT = "左鍵";
Blockly.Msg.HID_MOUSE_CLICK_RIGHT = "右鍵";
Blockly.Msg.HID_MOUSE_MOVE = "設定鼠標: 向";
Blockly.Msg.HID_MOUSE_MOVE_DISTANCE = "px";
Blockly.Msg.HID_MOUSE_MOVE_FOR = "移動";
Blockly.Msg.HID_MOUSE_PRESS = "設定鼠標: 按下";
Blockly.Msg.HID_MOUSE_RELEASE = "設定鼠標: 鬆開";
Blockly.Msg.HID_SETUP = "HID初始化";
Blockly.Msg.INFRAREDRAY_RECVAL = "接收值";
Blockly.Msg.INFRAREDRAY_SETUP = "紅外綫接收器設定";
Blockly.Msg.INLINE_INPUTS = "單行輸入";
Blockly.Msg.ISCOLOR = "是否顏色";
Blockly.Msg.JSONOBJECT_CREATE = "JSON Object"; // untranslated
Blockly.Msg.JSONTOOL_ARRAY_SIZE = "陣列大小";
Blockly.Msg.JSONTOOL_GENERATOR = "JSON構造器 ";
Blockly.Msg.JSONTOOL_GENERATOR_ARRAY_VALUE = "JSON陣列加入: value";
Blockly.Msg.JSONTOOL_GENERATOR_JSONOBJECT = "Object";
Blockly.Msg.JSONTOOL_GENERATOR_KEY = "JSON對象加入：Key ";
Blockly.Msg.JSONTOOL_GENERATOR_MAIN_JSONNAME = "JSONVar";
Blockly.Msg.JSONTOOL_GENERATOR_MAIN_TITLE = "生成JSON";
Blockly.Msg.JSONTOOL_GENERATOR_MAIN_TITLE_NAME = "命名為";
Blockly.Msg.JSONTOOL_GENERATOR_NESTED_TITLE = "嵌套JSON";
Blockly.Msg.JSONTOOL_GENERATOR_NESTED_TITLE_NAME = "命名為";
Blockly.Msg.JSONTOOL_GENERATOR_SETUP = "JSON構造器初始化";
Blockly.Msg.JSONTOOL_GENERATOR_VALUE = "Value";
Blockly.Msg.JSONTOOL_OBJECT_SIZE = "對象大小";
Blockly.Msg.JSONTOOL_PARSE_ARRAY = "(JSON陣列)";
Blockly.Msg.JSONTOOL_PARSE_BY = "獲取";
Blockly.Msg.JSONTOOL_PARSE_EACH = "從JSON對象";
Blockly.Msg.JSONTOOL_PARSE_INDEX = "下標為";
Blockly.Msg.JSONTOOL_PARSE_ISSUCCESS = "是否成功解析";
Blockly.Msg.JSONTOOL_PARSE_ISSUCCESS_NAME = "對於JSON對象";
Blockly.Msg.JSONTOOL_PARSE_JSONOBJECT = "Object";
Blockly.Msg.JSONTOOL_PARSE_KEY = "(JSON對象)key";
Blockly.Msg.JSONTOOL_PARSE_KEYVALUE = "從JSON Object %1 獲得key %2 的值";
Blockly.Msg.JSONTOOL_PARSE_NEST = "內嵌";
Blockly.Msg.JSONTOOL_PARSE_PRETTYPRINT = "打印 JSON ";
Blockly.Msg.JSONTOOL_PARSE_PRETTYPRINT_DISPLAY = "規範化數據r";
Blockly.Msg.JSONTOOL_PARSE_PRETTYPRINT_WAY = "按規範方式";
Blockly.Msg.JSONTOOL_PARSE_RESPONSE = "數據內容";
Blockly.Msg.JSONTOOL_PARSE_SETUP = "JSON解析器初始化";
Blockly.Msg.JSONTOOL_PARSE_TOVAR = "獲取數據到";
Blockly.Msg.JSONTOOL_PARSE_VARTYPE = "";
Blockly.Msg.LED_BACKCOLOR = "背景";
Blockly.Msg.LED_BRIGHTNESS_WARNING = "亮度應該在範圍 0 - 255 之間";
Blockly.Msg.LED_BRTN = "亮度";
Blockly.Msg.LED_CLEAR = "清除";
Blockly.Msg.LED_COLOR = "顔色";
Blockly.Msg.LED_COORDINATE = "座標";
Blockly.Msg.LED_DRAW = "畫";
Blockly.Msg.LED_FONT = "字體";
Blockly.Msg.LCD_FONT = "字體：";
Blockly.Msg.SUPER_LARGE = "超大";
Blockly.Msg.LARGE = "大";
Blockly.Msg.MIDDLE = "中";
Blockly.Msg.SMALL = "小";
Blockly.Msg.LED_FULL = "實心";
Blockly.Msg.LED_HEIGHT = "高";
Blockly.Msg.LED_LINE = "線";
Blockly.Msg.LED_LINE_END = "終點";
Blockly.Msg.LED_LINE_START = "起點";
Blockly.Msg.LED_MULTICOM = "H"; // untranslated
Blockly.Msg.LED_PANELHEIGHT = "高(拼接個數)";
Blockly.Msg.LED_PANELWIDTH = "寬(拼接個數)";
Blockly.Msg.LED_PATTERN = "圖形";
Blockly.Msg.LED_PIN = "接口";
Blockly.Msg.LED_PIXEL = "點";
Blockly.Msg.LED_POSITION = "位置";
Blockly.Msg.LED_RECTANGLE = "矩形";
Blockly.Msg.LED_SCROLL = "滾動";
Blockly.Msg.LED_SCROLL_NO = "否";
Blockly.Msg.LED_SCROLL_SPEED = "速度";
Blockly.Msg.LED_SCROLL_YES = "是";
Blockly.Msg.LED_SETUP = "LED燈組設定";
Blockly.Msg.LED_SET_BRIGHTNESS = "設定亮度為";
Blockly.Msg.LED_SET_ROTATION = "設定 LCD 方向旋轉";
Blockly.Msg.LED_SET_ROTATION_DEGREE = "度";
Blockly.Msg.LED_SHOW_ALL = "顯示圖案";
Blockly.Msg.LED_SINGLE_SETUP = "單個LED燈組設定";
Blockly.Msg.LED_SIZE = "大小";
Blockly.Msg.LED_STRIP_LOCATION = "位置";
Blockly.Msg.LED_STRIP_PIXEL = "繪製像素";
Blockly.Msg.LED_STROKED = "空心";
Blockly.Msg.LED_TEXT = "文本";
Blockly.Msg.LED_WIDTH = "寬";
Blockly.Msg.LED_WORD = "單字";
Blockly.Msg.LIGHT_BRIGHTNESS = "上的燈光亮度為：";
Blockly.Msg.LIGHT_PIN = "設定";
Blockly.Msg.LIGHT_TURNOFF = "關閉燈光輸出在";
Blockly.Msg.LISTS_CREATE_EMPTY_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-empty-list"; // untranslated
Blockly.Msg.LISTS_CREATE_EMPTY_TITLE = "建立空陣列";
Blockly.Msg.LISTS_CREATE_EMPTY_TOOLTIP = "返回一個長度為 0 的陣列，不包含任何資料記錄";
Blockly.Msg.LISTS_CREATE_LIST_WITH = "創建陣列";
Blockly.Msg.LISTS_CREATE_WITH_CONTAINER_TITLE_ADD = "陣列";
Blockly.Msg.LISTS_CREATE_WITH_CONTAINER_TOOLTIP = "添加、 刪除或重新排列各區塊來此重新配置這個 陣列 積木。";
Blockly.Msg.LISTS_CREATE_WITH_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-list-with"; // untranslated
Blockly.Msg.LISTS_CREATE_WITH_ITEM_TOOLTIP = "將一個項目加入到陣列中。";
Blockly.Msg.LISTS_CREATE_WITH_TOOLTIP = "建立一個具備任意數量項目的陣列。";
Blockly.Msg.LISTS_GETINDEX = "從陣列 %1 中獲取第 %2 位的值";
Blockly.Msg.LISTS_GET_INDEX_FIRST = "首個筆";
Blockly.Msg.LISTS_GET_INDEX_FROM_END = "倒數第#筆";
Blockly.Msg.LISTS_GET_INDEX_FROM_START = "#"; // untranslated
Blockly.Msg.LISTS_GET_INDEX_GET = "取值";
Blockly.Msg.LISTS_GET_INDEX_GET_REMOVE = "取出並移除";
Blockly.Msg.LISTS_GET_INDEX_LAST = "最後壹筆";
Blockly.Msg.LISTS_GET_INDEX_RANDOM = "隨機";
Blockly.Msg.LISTS_GET_INDEX_REMOVE = "移除";
Blockly.Msg.LISTS_GET_INDEX_TAIL = ""; // untranslated
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_FIRST = "返回陣列中的首個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_FROM_END = "返回在陣列中的指定位置的項目。#1 是最後一個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_FROM_START = "返回在陣列中的指定位置的項目。#1 是首個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_LAST = "返回陣列中的最後一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_RANDOM = "返回陣列中隨機的一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FIRST = "移除並返回陣列中的首個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FROM_END = "移除並返回陣列中的指定位置的項目。#1 是最後一個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FROM_START = "移除並返回陣列中的指定位置的項目。#1 是首個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_LAST = "移除並返回陣列中的最後一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_RANDOM = "移除並返回陣列中的隨機一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_FIRST = "移除陣列中的首個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_FROM_END = "移除在陣列中的指定位置的項目。#1 是最後一個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_FROM_START = "移除在陣列中的指定位置的項目。#1 是首個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_LAST = "移除陣列中的最後一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_RANDOM = "移除陣列中隨機的一個項目";
Blockly.Msg.LISTS_GET_SUBLIST_END_FROM_END = "到 倒數 # 位";
Blockly.Msg.LISTS_GET_SUBLIST_END_FROM_START = "到 #";
Blockly.Msg.LISTS_GET_SUBLIST_END_LAST = "到 最後";
Blockly.Msg.LISTS_GET_SUBLIST_HELPURL = "https://github.com/google/blockly/wiki/Lists#getting-a-sublist"; // untranslated
Blockly.Msg.LISTS_GET_SUBLIST_START_FIRST = "從 頭 取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_START_FROM_END = "從倒數 # 取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_START_FROM_START = "從 # 取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_TAIL = ""; // untranslated
Blockly.Msg.LISTS_GET_SUBLIST_TOOLTIP = "複製陣列中指定的部分。";
Blockly.Msg.LISTS_INDEX_OF_FIRST = "找出 首個 項目出現";
Blockly.Msg.LISTS_INDEX_OF_HELPURL = "https://github.com/google/blockly/wiki/Lists#getting-items-from-a-list"; // untranslated
Blockly.Msg.LISTS_INDEX_OF_LAST = "找出 最後一個 項目出現";
Blockly.Msg.LISTS_INDEX_OF_TOOLTIP = "返回在陣列中的首個/最後一個匹配項目的索引值。如果未找到則返回 0。";
Blockly.Msg.LISTS_INLIST = "自陣列";
Blockly.Msg.LISTS_INT_CREATE_WITH_INPUT_WITH = "使用這些值建立陣列";
Blockly.Msg.LISTS_ISEMPTY_HELPURL = "https://github.com/google/blockly/wiki/Lists#is-empty"; // untranslated
Blockly.Msg.LISTS_ISEMPTY_TITLE = "%1 值為空";
Blockly.Msg.LISTS_ISEMPTY_TOOLTIP = "如果該陣列為空，則返回 真。";
Blockly.Msg.LISTS_LENGTH_HELPURL = "https://github.com/google/blockly/wiki/Lists#length-of"; // untranslated
Blockly.Msg.LISTS_LENGTH_TITLE = "長度 %1";
Blockly.Msg.LISTS_LENGTH_TOOLTIP = "返回陣列的長度。";
Blockly.Msg.LISTS_REPEAT_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-list-with"; // untranslated
Blockly.Msg.LISTS_REPEAT_TITLE = "建立陣列使用項目 %1 重複 %2 次數";
Blockly.Msg.LISTS_REPEAT_TOOLTIP = "建立包含指定重複次數的 值 的陣列。";
Blockly.Msg.LISTS_SETINDEX = "賦值 %1 中第 %2 位的值到 %3";
Blockly.Msg.LISTS_SET_INDEX_HELPURL = "https://github.com/google/blockly/wiki/Lists#in-list--set"; // untranslated
Blockly.Msg.LISTS_SET_INDEX_INPUT_TO = "為";
Blockly.Msg.LISTS_SET_INDEX_INSERT = "插入在";
Blockly.Msg.LISTS_SET_INDEX_SET = "設定";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_FIRST = "在陣列的起始處添加一個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_FROM_END = "插入在陣列中的指定位置的項目。#1 是最後一個項目。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_FROM_START = "插入在陣列中的指定位置的項目。#1 是首個項目。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_LAST = "在陣列的尾端加入一個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_RANDOM = "在陣列中隨機插入項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_FIRST = "設定陣列中的首個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_FROM_END = "設定在陣列中的指定位置的項目。#1 是最後一個項目。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_FROM_START = "設定在陣列中的指定位置的項目。#1 是首個項目。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_LAST = "設定陣列中的最後一個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_RANDOM = "設定陣列中隨機的一個項目";
Blockly.Msg.LISTS_SORT_HELPURL = "https://github.com/google/blockly/wiki/Lists#sorting-a-list";
Blockly.Msg.LISTS_SORT_ORDER_ASCENDING = "升冪排序";
Blockly.Msg.LISTS_SORT_ORDER_DESCENDING = "降冪排序";
Blockly.Msg.LISTS_SORT_TITLE = "依%1%2%3排序";
Blockly.Msg.LISTS_SORT_TOOLTIP = "排序字典的複製內容";
Blockly.Msg.LISTS_SORT_TYPE_IGNORECASE = "依字母排序並忽略大小寫";
Blockly.Msg.LISTS_SORT_TYPE_NUMERIC = "依數字排序";
Blockly.Msg.LISTS_SORT_TYPE_TEXT = "依字母排序";
Blockly.Msg.LISTS_SPLIT_HELPURL = "https://github.com/google/blockly/wiki/Lists#splitting-strings-and-joining-lists"; // untranslated
Blockly.Msg.LISTS_SPLIT_LIST_FROM_TEXT = "從文本製作陣列";
Blockly.Msg.LISTS_SPLIT_TEXT_FROM_LIST = "從陣列拆出文本";
Blockly.Msg.LISTS_SPLIT_TOOLTIP_JOIN = "串起文本陣列成一個文本，由分隔符分隔。";
Blockly.Msg.LISTS_SPLIT_TOOLTIP_SPLIT = "拆分文本到文本陣列，按每個分隔符拆分。";
Blockly.Msg.LISTS_SPLIT_WITH_DELIMITER = "用分隔符";
Blockly.Msg.LISTS_STRING_CREATE_WITH_INPUT_WITH = "使用這些值建立陣列";
Blockly.Msg.LISTS_THE_LENGTH_OF = "%1的長度";
Blockly.Msg.LOGIC_BOOLEAN_FALSE = "否";
Blockly.Msg.LOGIC_BOOLEAN_HELPURL = "https://github.com/google/blockly/wiki/Logic#values"; // untranslated
Blockly.Msg.LOGIC_BOOLEAN_TOOLTIP = "返回 真 或 否。";
Blockly.Msg.LOGIC_BOOLEAN_TRUE = "真";
Blockly.Msg.LOGIC_CASE = "情況";
Blockly.Msg.LOGIC_COMPARE_HELPURL = "https://zh.wikipedia.org/wiki/不等";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_EQ = "如果這兩個輸入區塊內容相等，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_GT = "如果首個輸入大於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_GTE = "如果首個輸入大於或等於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_LT = "如果首個輸入小於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_LTE = "如果首個輸入是小於或等於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_NEQ = "如果這兩個輸入區塊內容不相等，返回 真。";
Blockly.Msg.LOGIC_DEFAULT = "默認";
Blockly.Msg.LOGIC_DO = "做";
Blockly.Msg.LOGIC_NEGATE_HELPURL = "https://github.com/google/blockly/wiki/Logic#not"; // untranslated
Blockly.Msg.LOGIC_NEGATE_TITLE = "非 %1";
Blockly.Msg.LOGIC_NEGATE_TOOLTIP = "如果輸入的值是 否，則返回 真。如果輸入的值是 真 返回 否。";
Blockly.Msg.LOGIC_NULL = "空";
Blockly.Msg.LOGIC_NULL_HELPURL = "https://en.wikipedia.org/wiki/Nullable_type"; // untranslated
Blockly.Msg.LOGIC_NULL_TOOLTIP = "返回 空。";
Blockly.Msg.LOGIC_OPERATION_AND = "且";
Blockly.Msg.LOGIC_OPERATION_HELPURL = "https://github.com/google/blockly/wiki/Logic#logical-operations"; // untranslated
Blockly.Msg.LOGIC_OPERATION_OR = "或";
Blockly.Msg.LOGIC_OPERATION_TOOLTIP_AND = "如果這兩個輸入值都為 真，則返回 真。";
Blockly.Msg.LOGIC_OPERATION_TOOLTIP_OR = "如果至少一個輸入的值為 真，返回 真。";
Blockly.Msg.LOGIC_SWITCH = "切換";
Blockly.Msg.LOGIC_TERNARY_CONDITION = "測試";
Blockly.Msg.LOGIC_TERNARY_HELPURL = "https://zh.wikipedia.org/wiki/條件運算符";
Blockly.Msg.LOGIC_TERNARY_IF_FALSE = "如果為非";
Blockly.Msg.LOGIC_TERNARY_IF_TRUE = "如果為真";
Blockly.Msg.LOGIC_TERNARY_TOOLTIP = "檢查 'test' 中的條件。如果條件為 真，將返回 '如果為 真' 值 ;否則，返回 '如果為 否' 的值。";
Blockly.Msg.MAINEASYMODE_TRANSFER_RECEIVE = "從AI模組獲取數據";
Blockly.Msg.MAINEASYMODE_TRANSFER_RECEIVE_GET = "從 ";
Blockly.Msg.MAINEASYMODE_TRANSFER_RECEIVE_GET_LINE2 = "獲取第";
Blockly.Msg.MAINEASYMODE_TRANSFER_RECEIVE_GET_LINE3 = "位的數據，並設定類型為";
Blockly.Msg.MAINEASYMODE_TRANSFER_RECEIVE_GET_LINE4 = "";
Blockly.Msg.MAINEASYMODE_TRANSFER_RECEIVE_LINE2 = "並存到 ";
Blockly.Msg.MAINEASYMODE_TRANSFER_RECEIVE_LINE3 = "長度爲 ";
Blockly.Msg.MAINEASYMODE_TRANSFER_SEND = "創建陣列";
Blockly.Msg.MAINEASYMODE_TRANSFER_SEND_LINE2 = "傳輸數據到AI上";
Blockly.Msg.MAINEASYMODE_TRANSFER_SEND_VALUE = "Data";
Blockly.Msg.MAINWIFI_RECEIVEMSG = "接收數據到";
Blockly.Msg.MAINWIFI_RECEIVEMSG_ISSUCCESS = "接收數據成功";
Blockly.Msg.MAINWIFI_RECEIVEMSG_LENGTH = ",數據長度為";
Blockly.Msg.MAINWIFI_SENDMSG = "發送數據";
Blockly.Msg.MAINWIFI_SENDMSG_LENGTH = ",數據長度為";
Blockly.Msg.MAINWIFI_SETUP = "無線數據傳輸初始化";
Blockly.Msg.MATH_ADDITION_SYMBOL = "+"; // untranslated
Blockly.Msg.MATH_ARITHMETIC_HELPURL = "https://zh.wikipedia.org/wiki/算術";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_ADD = "返回兩個數字的總和。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_DIVIDE = "返回兩個數字的商。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_MINUS = "返回兩個數字的差。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_MULTIPLY = "返回兩個數字的乘積。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_POWER = "返回第二個數字的指數的首個數字。";
Blockly.Msg.MATH_CHANGE_HELPURL = "https://zh.wikipedia.org/wiki/加法";
Blockly.Msg.MATH_CHANGE_TITLE = "修改 %1 自 %2";
Blockly.Msg.MATH_CHANGE_TOOLTIP = "將數字添加到變數 '%1'。";
Blockly.Msg.MATH_CONSTANT_HELPURL = "https://zh.wikipedia.org/wiki/數學常數";
Blockly.Msg.MATH_CONSTANT_TOOLTIP = "返回一個的常見常量： π (3.141......)，e (2.718...)、 φ (1.618...)、 開方(2) (1.414......)、 開方(½) (0.707......) 或 ∞ （無窮大）。";
Blockly.Msg.MATH_CONSTRAIN_HELPURL = "https://en.wikipedia.org/wiki/Clamping_%28graphics%29"; // untranslated
Blockly.Msg.MATH_CONSTRAIN_TITLE = "限制數字 %1 介於 (低) %2 到 (高) %3";
Blockly.Msg.MATH_CONSTRAIN_TOOLTIP = "限制數字介於兩個指定的數字之間";
Blockly.Msg.MATH_DIVISION_SYMBOL = "÷"; // untranslated
Blockly.Msg.MATH_IS_DIVISIBLE_BY = "可被整除";
Blockly.Msg.MATH_IS_EVEN = "是偶數";
Blockly.Msg.MATH_IS_NEGATIVE = "是負值";
Blockly.Msg.MATH_IS_ODD = "是奇數";
Blockly.Msg.MATH_IS_POSITIVE = "是正值";
Blockly.Msg.MATH_IS_PRIME = "是質數";
Blockly.Msg.MATH_IS_TOOLTIP = "如果數字是偶數，奇數，非負整數，正數、 負數或如果它是可被某數字整除，則返回 真 或 否。";
Blockly.Msg.MATH_IS_WHOLE = "是非負整數";
Blockly.Msg.MATH_MODULO_HELPURL = "https://zh.wikipedia.org/wiki/模除";
Blockly.Msg.MATH_MODULO_TITLE = "取餘數自 %1 ÷ %2";
Blockly.Msg.MATH_MODULO_TOOLTIP = "回傳兩個數字相除的餘數";
Blockly.Msg.MATH_MULTIPLICATION_SYMBOL = "×"; // untranslated
Blockly.Msg.MATH_NUMBER_HELPURL = "https://zh.wikipedia.org/wiki/數";
Blockly.Msg.MATH_NUMBER_TOOLTIP = "一個數字。";
Blockly.Msg.MATH_ONLIST_HELPURL = ""; // untranslated
Blockly.Msg.MATH_ONLIST_OPERATOR_AVERAGE = "平均值 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MAX = "最大值 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MEDIAN = "中位數 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MIN = "最小值 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MODE = "比較眾數 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_RANDOM = "隨機抽取 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_STD_DEV = "標準差 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_SUM = "總和 自陣列";
Blockly.Msg.MATH_ONLIST_TOOLTIP_AVERAGE = "返回陣列中數值的平均值 （算術平均值）。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MAX = "返回陣列中的最大數字。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MEDIAN = "返回陣列中數值的中位數。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MIN = "返回陣列中的最小數字。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MODE = "返回一個陣列中的最常見項目的陣列。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_RANDOM = "從陣列中返回一個隨機的項目。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_STD_DEV = "返回陣列中數字的標準差。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_SUM = "返回陣列中的所有數字的總和。";
Blockly.Msg.MATH_POWER_SYMBOL = "^"; // untranslated
Blockly.Msg.MATH_RANDOM_FLOAT_HELPURL = "https://zh.wikipedia.org/wiki/隨機數生成器";
Blockly.Msg.MATH_RANDOM_FLOAT_TITLE_RANDOM = "取隨機分數";
Blockly.Msg.MATH_RANDOM_FLOAT_TOOLTIP = "返回介於 （包含） 0.0 到 1.0 之間的隨機數。";
Blockly.Msg.MATH_RANDOM_INT_HELPURL = "https://zh.wikipedia.org/wiki/隨機數生成器";
Blockly.Msg.MATH_RANDOM_INT_TITLE = "取隨機整數介於 (低) %1 到 %2";
Blockly.Msg.MATH_RANDOM_INT_TOOLTIP = "回傳限制的數字區間內的隨機數字";
Blockly.Msg.MATH_ROUND_HELPURL = "https://zh.wikipedia.org/wiki/數值簡化";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUND = "四捨五入";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUNDDOWN = "無條件捨去";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUNDUP = "無條件進位";
Blockly.Msg.MATH_ROUND_TOOLTIP = "將數字向上或向下舍入。";
Blockly.Msg.MATH_SINGLE_HELPURL = "https://zh.wikipedia.org/wiki/平方根";
Blockly.Msg.MATH_SINGLE_OP_ABSOLUTE = "絕對值";
Blockly.Msg.MATH_SINGLE_OP_ROOT = "開根號";
Blockly.Msg.MATH_SINGLE_TOOLTIP_ABS = "返回指定數字的絕對值。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_EXP = "返回指定數字指數的 e";
Blockly.Msg.MATH_SINGLE_TOOLTIP_LN = "返回指定數字的自然對數。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_LOG10 = "返回指定數字的對數。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_NEG = "返回指定數字的 negation。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_POW10 = "返回指定數字指數的10的冪次。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_ROOT = "返回指定數字的平方根。";
Blockly.Msg.MATH_SUBTRACTION_SYMBOL = "-"; // untranslated
Blockly.Msg.MATH_TRIG_ACOS = "acos"; // untranslated
Blockly.Msg.MATH_TRIG_ASIN = "asin"; // untranslated
Blockly.Msg.MATH_TRIG_ATAN = "atan"; // untranslated
Blockly.Msg.MATH_TRIG_COS = "cos"; // untranslated
Blockly.Msg.MATH_TRIG_HELPURL = "https://zh.wikipedia.org/wiki/三角函數";
Blockly.Msg.MATH_TRIG_SIN = "sin"; // untranslated
Blockly.Msg.MATH_TRIG_TAN = "tan"; // untranslated
Blockly.Msg.MATH_TRIG_TOOLTIP_ACOS = "返回指定角度的反餘弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_ASIN = "返回指定角度的反正弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_ATAN = "返回指定角度的反正切值。";
Blockly.Msg.MATH_TRIG_TOOLTIP_COS = "返回指定角度的餘弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_SIN = "返回指定角度的正弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_TAN = "返回指定角度的正切值(非弧度）。";
Blockly.Msg.ME = "我";
Blockly.Msg.MOTION_GETACC = "獲取";
Blockly.Msg.MOTION_GETACC1 = "方向的加速度";
Blockly.Msg.MOTION_GETRAWDATA = "獲得數據";
Blockly.Msg.MOTION_GETYPR = "獲取";
Blockly.Msg.MOTION_GETYPR1 = "的旋轉度";
Blockly.Msg.MOTION_ONDIRECTION = "正在向";
Blockly.Msg.MOTION_ONDIRECTION1 = "偏轉";
Blockly.Msg.MOTION_ONDIRECTION_BACK = "後";
Blockly.Msg.MOTION_ONDIRECTION_CLOCKWISE = "順時針";
Blockly.Msg.MOTION_ONDIRECTION_COUNTERCLOCKWISE = "逆時針";
Blockly.Msg.MOTION_ONDIRECTION_FRONT = "前";
Blockly.Msg.MOTION_ONDIRECTION_LEFT = "左";
Blockly.Msg.MOTION_ONDIRECTION_RIGHT = "右";
Blockly.Msg.MOTION_ONSHAKE = "正在搖晃";
Blockly.Msg.MOTION_SETUP = "運動初始化";
Blockly.Msg.MOTION_TRENDENCY = "獲得運動趨勢";
Blockly.Msg.MOTOR_MOVE_DIRECTION1 = "順時針";
Blockly.Msg.MOTOR_MOVE_DIRECTION2 = "逆時針";
Blockly.Msg.MOTOR_MOVE_MOTOR = "設定馬達";
Blockly.Msg.MOTOR_MOVE_MSG = "和";
Blockly.Msg.MOTOR_SETUP = "馬達驅動車設定";
Blockly.Msg.MOTOR_SPEED = "速度";
Blockly.Msg.MOTOR_STOP = "設定馬達停止";
Blockly.Msg.MUSIC_BEAT = "拍";
Blockly.Msg.MUSIC_DURATION = "持續";
Blockly.Msg.MUSIC_INSTRUMENT = "設定樂器";
Blockly.Msg.MUSIC_INSTRUMENT_ACCORION = "手風琴";
Blockly.Msg.MUSIC_INSTRUMENT_BASS = "貝斯";
Blockly.Msg.MUSIC_INSTRUMENT_CELLO = "大提琴";
Blockly.Msg.MUSIC_INSTRUMENT_DRAWBARORGAN = "爵士風琴";
Blockly.Msg.MUSIC_INSTRUMENT_DRUM = "太鼓";
Blockly.Msg.MUSIC_INSTRUMENT_EGUITAR = "電吉他";
Blockly.Msg.MUSIC_INSTRUMENT_EPIANO = "電子琴";
Blockly.Msg.MUSIC_INSTRUMENT_FLUTE = "長笛";
Blockly.Msg.MUSIC_INSTRUMENT_GPIANO = "經典鋼琴";
Blockly.Msg.MUSIC_INSTRUMENT_GUITAR = "吉他";
Blockly.Msg.MUSIC_INSTRUMENT_MUSICBOX = "八音盒";
Blockly.Msg.MUSIC_INSTRUMENT_PICCOLO = "短笛";
Blockly.Msg.MUSIC_INSTRUMENT_SAX = "薩克斯";
Blockly.Msg.MUSIC_INSTRUMENT_SITAR = "西塔琴";
Blockly.Msg.MUSIC_INSTRUMENT_TRUMPET = "喇叭";
Blockly.Msg.MUSIC_INSTRUMENT_VIOLA = "中提琴";
Blockly.Msg.MUSIC_INSTRUMENT_VIOLIN = "小提琴";
Blockly.Msg.MUSIC_INSTRUMENT_WHISTLE = "汽笛";
Blockly.Msg.MUSIC_INSTRUMENT_WOODBLOCK = "木魚";
Blockly.Msg.MUSIC_INSTRUMENT_XYLOPHONE = "木琴";
Blockly.Msg.MUSIC_MP3_CURRENTVOLUME = "獲得當前音量";
Blockly.Msg.MUSIC_MP3_PLAYALL = "播放陣列";
Blockly.Msg.MUSIC_MP3_PLAYALL_NAME = "播放模式";
Blockly.Msg.MUSIC_MP3_PLAYMODE_LISTREPEAT = "陣列循環";
Blockly.Msg.MUSIC_MP3_PLAYMODE_NORMAL = "單次";
Blockly.Msg.MUSIC_MP3_PLAYMODE_REPEAT = "單曲循環";
Blockly.Msg.MUSIC_MP3_PLAYONE = "播放音樂文件";
Blockly.Msg.MUSIC_MP3_PLAYONE_NAME = "音樂:";
Blockly.Msg.MUSIC_MP3_PLAYONE_NORMAL = "單次";
Blockly.Msg.MUSIC_MP3_PLAYONE_REPEAT = "循環";
Blockly.Msg.MUSIC_MP3_PLAYSETTING = "播放器設定:";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_NEXTSONG = "下壹曲";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_PAUSE = "暫停";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_PLAYALL = "播放所有樂曲";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_PRESONG = "上壹曲";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_RESUME = "播放";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_STOP = "停止";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_VOLDOWN = "調小音量";
Blockly.Msg.MUSIC_MP3_PLAYSETTING_VOLUP = "調大音量";
Blockly.Msg.MUSIC_MP3_PLAY_NORMAL = "順序播放";
Blockly.Msg.MUSIC_MP3_PLAY_REPEAT = "陣列循環";
Blockly.Msg.MUSIC_MP3_SETUP = "MP3播放器初始化";
Blockly.Msg.MUSIC_MP3_SETUP_SETVOLUME = "設定音量";
Blockly.Msg.MUSIC_MP3_SETUP_SETVOLUME_HIGH = "高";
Blockly.Msg.MUSIC_MP3_SETUP_SETVOLUME_LOW = "低";
Blockly.Msg.MUSIC_MP3_SETUP_SETVOLUME_MID = "中";
Blockly.Msg.MUSIC_MP3_SETVOLUME = "設定音量為";
Blockly.Msg.MUSIC_NOTE = "音階";
Blockly.Msg.MUSIC_PLAY_NOTE = "播放";
Blockly.Msg.MUSIC_PLAY_NOTE_TOOLTIP = "right click this block and check the help page to see the corresponding music note."; // untranslated
Blockly.Msg.MUSIC_REST = "音符間隔";
Blockly.Msg.MUSIC_VOLUME = "設定音量";
Blockly.Msg.MUSIC_VOL_MAX = "最大";
Blockly.Msg.MUSIC_VOL_MIN = "最小";
Blockly.Msg.Monday = "周壹";
Blockly.Msg.Motion_Accelerate = "加速度";
Blockly.Msg.Motion_Gyroscope = "陀螺儀";
Blockly.Msg.NBIOT_ENABLE = "啟用 NB-IoT 序列埠交互指令";
Blockly.Msg.NBIOT_HTTP_APIKEY = "雲端事件API密匙";
Blockly.Msg.NBIOT_HTTP_CLOUD_GET = "NB-IoT CocoCloud: Receive Data"; // untranslated
Blockly.Msg.NBIOT_HTTP_CONTENTTYPE = "Content Type"; // untranslated
Blockly.Msg.NBIOT_HTTP_DATA = "數據名稱";
Blockly.Msg.NBIOT_HTTP_IFTTT_APIKEY = "IFTTT API Key";
Blockly.Msg.NBIOT_HTTP_IFTTT_EVENT = "IFTTT項目名稱";
Blockly.Msg.NBIOT_HTTP_IFTTT_TITLE = "NB-IoT 連接IFTTT:發送數據";
Blockly.Msg.NBIOT_HTTP_THINGSPEAK_APIKEY = "事件API密匙";
Blockly.Msg.NBIOT_HTTP_THINGSPEAK_TITLE = "NB-IoT 連接Thingspeak:發送數據";
Blockly.Msg.NBIOT_HTTP_TITLE = "NB-IoT 連接CocoCloud:發送數據";
Blockly.Msg.NBIOT_IS_POWERON = "NB-IoT 模組啓動成功";
Blockly.Msg.NBIOT_NETWORK_CONNECTED = "網絡連接成功";
Blockly.Msg.NBIOT_NETWORK_IP = "獲取 NB-IoT 模組 IP 地址";
Blockly.Msg.NBIOT_SETUP = "NB-IoT 通訊初始化";
Blockly.Msg.NEW_INSTANCE = "New instance..."; // untranslated
Blockly.Msg.NEW_INSTANCE_TITLE = "New instance name:"; // untranslated
Blockly.Msg.NEW_VARIABLE = "新變數...";
Blockly.Msg.NEW_VARIABLE_TITLE = "新變數名稱:";
Blockly.Msg.NRFMODULE_GET_RECEIVED_DATA = "獲取 nRF 模組收到的資料";
Blockly.Msg.NRFMODULE_RECEIVING_DATA_TEXT = "nRF 模組開始接收資料";
Blockly.Msg.NRFMODULE_SEND_DATA_DATA_TEXT = "資料內容:";
Blockly.Msg.NRFMODULE_SEND_DATA_TITLE = "nRF 模組傳送資料";
Blockly.Msg.NRFMODULE_SETUP_CE_TEXT = "CE 引腳連線:";
Blockly.Msg.NRFMODULE_SETUP_CSN_TEXT = "CSN 引腳連線:";
Blockly.Msg.NRFMODULE_SETUP_SET_ADDRESS = "設定通訊地址";
Blockly.Msg.NRFMODULE_SETUP_TITLE = "nRF24L01 通訊模組初始化";
Blockly.Msg.OLCD_CENTER_POS = "圓心座標";
Blockly.Msg.OLCD_SCALE = "尺寸";
Blockly.Msg.OLCD_WT = "字串換行";
Blockly.Msg.OLCD_BW = "邊框寬度";
Blockly.Msg.OLCD_SET_POS = "設定座標";
Blockly.Msg.OLCD_CIRCLE = "圓形";
Blockly.Msg.OLCD_CLEAR = "清除";
Blockly.Msg.OLCD_COLOR = "顔色";
Blockly.Msg.OLCD_COORDINATE = "起始點座標";
Blockly.Msg.OLCD_DRAW = "LCD 螢幕繪製";
Blockly.Msg.OLCD_FALSE = "否";
Blockly.Msg.OLCD_VLINE = "垂直";
Blockly.Msg.OLCD_HLINE = "水平";
Blockly.Msg.OLCD_FULLCIRCLE = "全圓";
Blockly.Msg.OLCD_CIRCLE = "圓圈";
Blockly.Msg.OLCD_LENGTHIS = "長度是";
Blockly.Msg.OLCD_FULL = "實心";
Blockly.Msg.OLCD_STROKED = "空心";
Blockly.Msg.OLCD_HEIGHT = "高";
Blockly.Msg.OLCD_SCREEN = "屏幕";
Blockly.Msg.OLCD_LINE = "直線";
Blockly.Msg.OLCD_LINE_END = "到";
Blockly.Msg.OLCD_LINE_START = "從";
Blockly.Msg.OLCD_POINT = "點";
Blockly.Msg.OLCD_POSITION = "位置";
Blockly.Msg.OLCD_RADIUS = "設定半徑為";
Blockly.Msg.OLCD_RECTANGLE = "矩形";
Blockly.Msg.OLCD_SETROTATION = "將 LCD 螢幕旋轉至";
Blockly.Msg.OLCD_SETROTATION_DEGREE = "度";
Blockly.Msg.OLCD_SETUP = "OLCD屏幕設定";
Blockly.Msg.OLCD_SIZE = "尺寸";
Blockly.Msg.OLCD_STROKED = "空心";
Blockly.Msg.OLCD_TEXT = "文本";
Blockly.Msg.OLCD_TEXTNEWLINE = "換行";
Blockly.Msg.OLCD_TRIANGLE = "三角形";
Blockly.Msg.OLCD_TRUE = "是";
Blockly.Msg.OLCD_WIDTH = "寬";
Blockly.Msg.ORDINAL_NUMBER_SUFFIX = ""; // untranslated
Blockly.Msg.PROCEDURES_ALLOW_STATEMENTS = "允許語句";
Blockly.Msg.PROCEDURES_BEFORE_PARAMS = "與：";
Blockly.Msg.PROCEDURES_CALLNORETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程式";
Blockly.Msg.PROCEDURES_CALLNORETURN_TOOLTIP = "執行使用者定義的函數 '%1'。";
Blockly.Msg.PROCEDURES_CALLRETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程式";
Blockly.Msg.PROCEDURES_CALLRETURN_TOOLTIP = "執行使用者定義的函數 '%1' 並使用它的回傳值";
Blockly.Msg.PROCEDURES_CALL_BEFORE_PARAMS = "與：";
Blockly.Msg.PROCEDURES_CREATE_DO = "建立 '%1'";
Blockly.Msg.PROCEDURES_DEFNORETURN_COMMENT = "描述此函數...";
Blockly.Msg.PROCEDURES_DEFNORETURN_DO = ""; // untranslated
Blockly.Msg.PROCEDURES_DEFNORETURN_HELPURL = "https://en.wikipedia.org/wiki/Procedure_%28computer_science%29"; // untranslated
Blockly.Msg.PROCEDURES_DEFNORETURN_PROCEDURE = "func1";
Blockly.Msg.PROCEDURES_DEFNORETURN_TITLE = "自定義函數";
Blockly.Msg.PROCEDURES_DEFNORETURN_TOOLTIP = "創建一個無回傳值的函數。";
Blockly.Msg.PROCEDURES_DEFRETURN_HELPURL = "https://en.wikipedia.org/wiki/Procedure_%28computer_science%29"; // untranslated
Blockly.Msg.PROCEDURES_DEFRETURN_RETURN = "回傳";
Blockly.Msg.PROCEDURES_DEFRETURN_TOOLTIP = "創建一個有回傳值的函數。";
Blockly.Msg.PROCEDURES_DEF_DUPLICATE_WARNING = "警告: 此函數中有重複的參數。";
Blockly.Msg.PROCEDURES_HIGHLIGHT_DEF = "反白顯示函式定義";
Blockly.Msg.PROCEDURES_IFRETURN_HELPURL = "http://c2.com/cgi/wiki?GuardClause"; // untranslated
Blockly.Msg.PROCEDURES_IFRETURN_TOOLTIP = "如果值為 真，則返回第二個值。";
Blockly.Msg.PROCEDURES_IFRETURN_WARNING = "警告: 此積木僅可在定義函式時使用。";
Blockly.Msg.PROCEDURES_MUTATORARG_TITLE = "變數:";
Blockly.Msg.PROCEDURES_MUTATORARG_TOOLTIP = "添加函數輸入。";
Blockly.Msg.PROCEDURES_MUTATORCONTAINER_TITLE = "參數";
Blockly.Msg.PROCEDURES_MUTATORCONTAINER_TOOLTIP = "添加、刪除或重新排列此函數的輸入。";
Blockly.Msg.PULSESENSOR_GETBPM = "讀取心率的值為";
Blockly.Msg.PULSESENSOR_HEARTBEAT_PRINT = "在串口相機打印心率原始數據";
Blockly.Msg.PULSESENSOR_HEARTBEAT_WHEN = "當心率跳動時";
Blockly.Msg.PULSESENSOR_HEARTBEAT_WHENNO = "當心率未跳動時";
Blockly.Msg.PULSESENSOR_SETUP = "心率傳感設定";
Blockly.Msg.PULSESENSOR_SETUP_1 = "設定傳感器的接口為";
Blockly.Msg.READ_B = "讀取藍";
Blockly.Msg.READ_G = "讀取綠";
Blockly.Msg.READ_R = "讀取紅";
Blockly.Msg.RED = "紅";
Blockly.Msg.REDO = "重試";
Blockly.Msg.REMOVE_COMMENT = "移除註解";
Blockly.Msg.RENAME_INSTANCE = "Rename instance..."; // untranslated
Blockly.Msg.RENAME_INSTANCE_TITLE = "Rename all '%1' instances to:"; // untranslated
Blockly.Msg.RENAME_VARIABLE = "重新命名變數...";
Blockly.Msg.RENAME_VARIABLE_TITLE = "將所有 \"%1\" 變數重新命名為:";
Blockly.Msg.REQUEST_DATA_CLOUD = "雲端數據";
Blockly.Msg.REQUEST_DATA_STRING = "字串";
Blockly.Msg.RFID_READID = "讀取卡片ID";
Blockly.Msg.RFID_SETUP = "RFID初始化";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT = "設定雙足的動作";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_BACKYARD = "向後退";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_GOINGUP = "上下蹲";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_KICKLEFT = "左踢腳";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_KICKRIGHT = "右踢腳";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_MOONWALKLEFT = "往左月球漫步";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_MOONWALKRIGHT = "往右月球漫步";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_RUN = "向前跑";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_SWING = "搖擺舞";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_TURNLEFT = "原地左轉";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_TURNRIGHT = "原地右轉";
Blockly.Msg.ROBOT_SETMOVE_MOVEMENT_WALK = "向前走";
Blockly.Msg.ROBOT_SETMOVE_TEMPO = "在速度為";
Blockly.Msg.ROBOT_SETUP = "雙足行走機器人設定";
Blockly.Msg.ROBOT_SETUP_SETRLPIN = "和左腳接口";
Blockly.Msg.ROBOT_SETUP_SETRRPIN = "設定右腳接口";
Blockly.Msg.ROBOT_SETUP_SETYLPIN = "和左膝接口";
Blockly.Msg.ROBOT_SETUP_SETYRPIN = "設定右膝接口";
Blockly.Msg.RTC_DAY = "日";
Blockly.Msg.RTC_GETDATE = "獲取當前日期";
Blockly.Msg.RTC_GETTIME = "獲取當前時間";
Blockly.Msg.RTC_GETWEEK = "獲取當前周數";
Blockly.Msg.RTC_HOUR = "時";
Blockly.Msg.RTC_MINUTE = "分";
Blockly.Msg.RTC_MONTH = "月";
Blockly.Msg.RTC_SECOND = "秒";
Blockly.Msg.RTC_SETDATE = "日期";
Blockly.Msg.RTC_SETDATETIME = "設定日期時間";
Blockly.Msg.RTC_SETTIME = "時鐘";
Blockly.Msg.RTC_SETUP = "RTC初始化";
Blockly.Msg.RTC_SETWEEK = "周數";
Blockly.Msg.RTC_WEEK = "周";
Blockly.Msg.RTC_YEAR = "年";
Blockly.Msg.SONAR = "超聲波";
Blockly.Msg.SONAR_READ_DIST = "讀取距離從";
Blockly.Msg.SONAR_SETUP = "設定";
Blockly.Msg.SONAR_SETUP_ECHOPIN = "和 Echo";
Blockly.Msg.SONAR_SETUP_MAXDIST = "設定最大距離";
Blockly.Msg.SONAR_SETUP_TRIGPIN = "設定 Trig";
Blockly.Msg.Saturday = "周六";
Blockly.Msg.Sunday = "周日";
Blockly.Msg.TEXT_APPEND_APPENDTEXT = "後加入字串";
Blockly.Msg.TEXT_APPEND_HELPURL = "https://github.com/google/blockly/wiki/Text#text-modification"; // untranslated
Blockly.Msg.TEXT_APPEND_TO = "在";
Blockly.Msg.TEXT_APPEND_TOOLTIP = "將壹些字串追加到變數 '%1'。";
Blockly.Msg.TEXT_CHANGECASE_HELPURL = "https://github.com/google/blockly/wiki/Text#adjusting-text-case"; // untranslated
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_LOWERCASE = "轉成 小寫";
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_TITLECASE = "轉成 首字母大寫";
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_UPPERCASE = "轉成 大寫";
Blockly.Msg.TEXT_CHANGECASE_TOOLTIP = "使用不同的大小寫複製這段字串。";
Blockly.Msg.TEXT_CHARAT_FIRST = "取首個字元";
Blockly.Msg.TEXT_CHARAT_FROM_END = "取得 倒數第 # 個字元";
Blockly.Msg.TEXT_CHARAT_FROM_START = "取得 字元 #";
Blockly.Msg.TEXT_CHARAT_HELPURL = "https://github.com/google/blockly/wiki/Text#extracting-text"; // untranslated
Blockly.Msg.TEXT_CHARAT_INPUT_INTEXT = "的字元在字串";
Blockly.Msg.TEXT_CHARAT_LAST = "取最後一個字元";
Blockly.Msg.TEXT_CHARAT_RANDOM = "取隨機一個字元";
Blockly.Msg.TEXT_CHARAT_TAIL = "";
Blockly.Msg.TEXT_CHARAT_TOOLTIP = "返回位於指定位置的字元。";
Blockly.Msg.TEXT_CREATE_JOIN_ITEM_TOOLTIP = "將一個項目加入到字串中。";
Blockly.Msg.TEXT_CREATE_JOIN_TITLE_JOIN = "加入";
Blockly.Msg.TEXT_CREATE_JOIN_TOOLTIP = "添加、 刪除或重新排列各區塊來此重新配置這個字串積木。";
Blockly.Msg.TEXT_GET_SUBSTRING_END_FROM_END = "到 倒數第 # 個字元";
Blockly.Msg.TEXT_GET_SUBSTRING_END_FROM_START = "到 字元 #";
Blockly.Msg.TEXT_GET_SUBSTRING_END_LAST = "到 最後一個字元";
Blockly.Msg.TEXT_GET_SUBSTRING_HELPURL = "https://github.com/google/blockly/wiki/Text#extracting-a-region-of-text"; // untranslated
Blockly.Msg.TEXT_GET_SUBSTRING_INPUT_IN_TEXT = "自字串";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FIRST = "取得段落字串 自 首個字元";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FROM_END = "取得段落字串自 #";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FROM_START = "取得段落字串自 #";
Blockly.Msg.TEXT_GET_SUBSTRING_TAIL = ""; // untranslated
Blockly.Msg.TEXT_GET_SUBSTRING_TOOLTIP = "返回指定的部分字串。";
Blockly.Msg.TEXT_INDEXOF_HELPURL = "https://github.com/google/blockly/wiki/Text#finding-text"; // untranslated
Blockly.Msg.TEXT_INDEXOF_INPUT_INTEXT = "在字串";
Blockly.Msg.TEXT_INDEXOF_OPERATOR_FIRST = "尋找 首個 出現的字串";
Blockly.Msg.TEXT_INDEXOF_OPERATOR_LAST = "尋找 最後一個 出現的字串";
Blockly.Msg.TEXT_INDEXOF_TAIL = ""; // untranslated
Blockly.Msg.TEXT_INDEXOF_TOOLTIP = "返回在第二個字串中的首個/最後一個匹配項目的索引值。如果未找到則返回 0。";
Blockly.Msg.TEXT_ISEMPTY_HELPURL = "https://github.com/google/blockly/wiki/Text#checking-for-empty-text"; // untranslated
Blockly.Msg.TEXT_ISEMPTY_TITLE = "%1 為空";
Blockly.Msg.TEXT_ISEMPTY_TOOLTIP = "如果提供的字串為空，則返回 真。";
Blockly.Msg.TEXT_JOIN_HELPURL = "https://github.com/google/blockly/wiki/Text#text-creation"; // untranslated
Blockly.Msg.TEXT_JOIN_TITLE_CREATEWITH = "建立字串使用";
Blockly.Msg.TEXT_JOIN_TOOLTIP = "通過串起任意數量的項目來建立壹段字串。";
Blockly.Msg.TEXT_LENGTH_HELPURL = "https://github.com/google/blockly/wiki/Text#text-modification"; // untranslated
Blockly.Msg.TEXT_LENGTH_TITLE = "長度 %1";
Blockly.Msg.TEXT_LENGTH_TOOLTIP = "返回這串字串的字元數（含空格） 。";
Blockly.Msg.TEXT_PRINT_HELPURL = "https://github.com/google/blockly/wiki/Text#printing-text"; // untranslated
Blockly.Msg.TEXT_PRINT_TITLE = "序列埠印出 %1";
Blockly.Msg.TEXT_PRINT_TOOLTIP = "序列埠印出指定的字串、 數字或其他值。";
Blockly.Msg.TEXT_PROMPT_HELPURL = "https://github.com/google/blockly/wiki/Text#getting-input-from-the-user"; // untranslated
Blockly.Msg.TEXT_PROMPT_TOOLTIP_NUMBER = "輸入數字";
Blockly.Msg.TEXT_PROMPT_TOOLTIP_TEXT = "輸入字串";
Blockly.Msg.TEXT_PROMPT_TYPE_NUMBER = "輸入 數字 並顯示提示訊息";
Blockly.Msg.TEXT_PROMPT_TYPE_TEXT = "輸入 字串 並顯示提示訊息";
Blockly.Msg.TEXT_TEXT_HELPURL = "https://zh.wikipedia.org/wiki/字串";
Blockly.Msg.TEXT_TEXT_TOOLTIP = "字元、 單詞或壹行字串。";
Blockly.Msg.TEXT_TRIM_HELPURL = "https://github.com/google/blockly/wiki/Text#trimming-removing-spaces"; // untranslated
Blockly.Msg.TEXT_TRIM_OPERATOR_BOTH = "消除兩側空格";
Blockly.Msg.TEXT_TRIM_OPERATOR_LEFT = "消除左側空格";
Blockly.Msg.TEXT_TRIM_OPERATOR_RIGHT = "消除右側空格";
Blockly.Msg.TEXT_TRIM_TOOLTIP = "複製這段字串的同時刪除兩端多餘的空格。";
Blockly.Msg.THINGSPEAK_CREATE_WITH_CONTAINER_TITLE_ADD = "Field";
Blockly.Msg.THINGSPEAK_CREATE_WITH_INPUT_WITH = "FIELD";
Blockly.Msg.THINGSPEAK_CREATE_WITH_ITEM_TITLE = "value";
Blockly.Msg.TODAY = "今天";
Blockly.Msg.TOUCH_AT = "觸摸傳感接口 ";
Blockly.Msg.TOUCH_CASE = "按鍵";
Blockly.Msg.TOUCH_DEFAULT = "默認";
Blockly.Msg.TOUCH_DO = "執行";
Blockly.Msg.TOUCH_LOOSE = "儅鬆開時";
Blockly.Msg.TOUCH_SETUP = "觸摸感應設定";
Blockly.Msg.TOUCH_SWITCH = "⌘ 當觸碰傳感接口";
Blockly.Msg.TOUCH_THEN_LOOSE_SWITCH = "⌘ 儅鬆開被觸碰的接口";
Blockly.Msg.Thursday = "周四";
Blockly.Msg.Tuesday = "周二";
Blockly.Msg.UNDO = "還原";
Blockly.Msg.VARIABLES_DEFAULT_NAME = "item"; // untranslated
Blockly.Msg.VARIABLES_GET_CREATE_SET = "建立 '設定 %1'";
Blockly.Msg.VARIABLES_GET_HELPURL = "https://github.com/google/blockly/wiki/Variables#get"; // untranslated
Blockly.Msg.VARIABLES_GET_TOOLTIP = "返回此變數的值。";
Blockly.Msg.VARIABLES_SET = "賦值 %1 為 %2";
Blockly.Msg.VARIABLES_SET_CREATE_GET = "建立 '取得 %1'";
Blockly.Msg.VARIABLES_SET_HELPURL = "https://github.com/google/blockly/wiki/Variables#set"; // untranslated
Blockly.Msg.VARIABLES_SET_TOOLTIP = "設定此變數，好和輸入值相等。";
Blockly.Msg.WATERTEMP_GET_TEMP = "獲取水溫數據 (ºC)";
Blockly.Msg.WATERTEMP_SETUP_ATTACHED_PIN = "數字引腳設定:";
Blockly.Msg.WATERTEMP_SETUP_BLOCKNAME = "水溫感應器";
Blockly.Msg.WATERTEMP_SETUP_SENSORTYPE = "感應器型號:";
Blockly.Msg.WATERTEMP_SETUP_SETUP = "初始化";
Blockly.Msg.WEBPAGE_BUTTONCTRL_SETPATH = " set path to:"; // untranslated
Blockly.Msg.WEBPAGE_BUTTONCTRL_TEXT_BOTTOM = "設定底部按鈕為:";
Blockly.Msg.WEBPAGE_BUTTONCTRL_TEXT_CENTER = "設定中間按鈕為:";
Blockly.Msg.WEBPAGE_BUTTONCTRL_TEXT_LEFT = "設定左側按鈕為:";
Blockly.Msg.WEBPAGE_BUTTONCTRL_TEXT_RIGHT = "設定右側按鈕為:";
Blockly.Msg.WEBPAGE_BUTTONCTRL_TEXT_TOP = "設定頂部按鈕為:";
Blockly.Msg.WEBPAGE_BUTTONCTRL_TITLE = "網頁控制面板: 按鍵控制器";
Blockly.Msg.WEBPAGE_BUTTON_NAME = "按鈕名稱";
Blockly.Msg.WEBPAGE_BUTTON_ROUTER = "設定請求路徑為:";
Blockly.Msg.WEBPAGE_BUTTON_TITLE = "網頁控制面板: 按鈕";
Blockly.Msg.WEBPAGE_COLORPICKER_PATH = "設定請求路徑為:";
Blockly.Msg.WEBPAGE_COLORPICKER_SUBTITLE = "*註意: 傳輸的顏色資料為 RGB 顏色制式";
Blockly.Msg.WEBPAGE_COLORPICKER_TITLE = "網頁控制面板: 取色器控制元件";
Blockly.Msg.WEBPAGE_LABLE = "標籤名稱";
Blockly.Msg.WEBPAGE_LABLE_TITLE = "網頁控制面板: 字串";
Blockly.Msg.WIFICLIENT_HTTP_GET_DATA = "獲取數據並存到";
Blockly.Msg.WIFICLIENT_HTTP_GET_URL = "發送GET請求到";
Blockly.Msg.WIFICLIENT_HTTP_POST_DATA = "數據";
Blockly.Msg.WIFICLIENT_HTTP_POST_TYPE = "類型爲";
Blockly.Msg.WIFICLIENT_HTTP_POST_URL = "發送POST請求到";
Blockly.Msg.WIFICLIENT_HTTP_POST_VAR = "創建陣列";
Blockly.Msg.WIFICLIENT_HTTP_PUT_DATA = "要發送內容";
Blockly.Msg.WIFICLIENT_HTTP_PUT_TYPE = "類型爲";
Blockly.Msg.WIFICLIENT_HTTP_PUT_URL = "發送PUT請求到";
Blockly.Msg.WIFICLIENT_HTTP_RESPONSE = "獲得HTTP響應";
Blockly.Msg.WIFICLIENT_HTTP_SETUP = "客戶端初始化";
Blockly.Msg.WIFICLIENT_RECEIVE_GET = "從";
Blockly.Msg.WIFICLIENT_RECEIVE_GET_LINE2 = "獲取第";
Blockly.Msg.WIFICLIENT_RECEIVE_GET_LINE3 = "位的數據,類型爲";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_END = "值";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_GETDATA = "獲取數據並將其存到";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_KEY = "從";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_KEY1 = "獲取雲端項目中";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_KEY2 = "屬性名爲";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_SENDDATA = "發送數據:";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_SETVAR = "變數";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_SETVAR_FROM = "";
Blockly.Msg.WIFIEASYMODE_COCOCLOUD_TYPE = "的";
Blockly.Msg.WIFIEASYMODE_COCOClOUD_DATA_NAME = "數據名:";
Blockly.Msg.WIFIEASYMODE_COCOClOUD_EVENT = "Cloud Event API Key :";
Blockly.Msg.WIFIEASYMODE_IFTTT_EVENT = "IFTTT項目名稱:";
Blockly.Msg.WIFIEASYMODE_IFTTT_FETCH = "獲取數據";
Blockly.Msg.WIFIEASYMODE_IFTTT_KEY = "IFTTT Key:";
Blockly.Msg.WIFIEASYMODE_IFTTT_POST = "發送數據";
Blockly.Msg.WIFIEASYMODE_IFTTT_SENDDATA = "發送數據:";
Blockly.Msg.WIFIEASYMODE_IFTTT_TYPE = "Webhook類型:";
Blockly.Msg.WIFIEASYMODE_NETWORK_PW = "密碼:";
Blockly.Msg.WIFIEASYMODE_NETWORK_SSID = "SSID:";
Blockly.Msg.WIFIEASYMODE_NETWORK_TITLE = "連接Wi-Fi";
Blockly.Msg.WIFIEASYMODE_THINGSPEAK_APIKEY = "Channel API Key:";
Blockly.Msg.WIFIEASYMODE_THINGSPEAK_SENDDATA = "發送數據:";
Blockly.Msg.WIFIEASYMODE_TRANSFER_RECEIVE = "從主機板獲取數據";
Blockly.Msg.WIFIEASYMODE_TRANSFER_RECEIVE_GET = "從";
Blockly.Msg.WIFIEASYMODE_TRANSFER_RECEIVE_GET_LINE2 = "獲取第";
Blockly.Msg.WIFIEASYMODE_TRANSFER_RECEIVE_GET_LINE3 = "位的數據，並設定類型為";
Blockly.Msg.WIFIEASYMODE_TRANSFER_RECEIVE_GET_LINE4 = "";
Blockly.Msg.WIFIEASYMODE_TRANSFER_RECEIVE_LINE2 = "並存到";
Blockly.Msg.WIFIEASYMODE_TRANSFER_RECEIVE_LINE3 = "長度爲 ";
Blockly.Msg.WIFIEASYMODE_TRANSFER_SEND = "創建陣列";
Blockly.Msg.WIFIEASYMODE_TRANSFER_SEND_LINE2 = "傳輸數據到主機板上";
Blockly.Msg.WIFIEASYMODE_TRANSFER_SEND_VALUE = "Data";
Blockly.Msg.WIFINETWORK_AP_PW = "密碼:";
Blockly.Msg.WIFINETWORK_AP_SETUP = "建立Wi-Fi熱點";
Blockly.Msg.WIFINETWORK_AP_SSID = "SSID:";
Blockly.Msg.WIFINETWORK_CONNECT = "連接Wi-Fi";
Blockly.Msg.WIFINETWORK_CONNECT_PW = "密碼:";
Blockly.Msg.WIFINETWORK_CONNECT_SSID = "SSID:";
Blockly.Msg.WIFINETWORK_GETGATEWAYIP = "獲取網關IP";
Blockly.Msg.WIFINETWORK_GETLOCALIP = "獲取本地IP";
Blockly.Msg.WIFINETWORK_GETMACADDR = "獲取MAC地址";
Blockly.Msg.WIFINETWORK_GETSTATIONNUM = "獲取連接設備數量";
Blockly.Msg.WIFINETWORK_ISCONNECTED = "是否連接成功";
Blockly.Msg.WIFINETWORK_PW_WARN = "密碼設定應該超過8位";
Blockly.Msg.WIFISERVER_HANDLECLIENT = "handleclient";
Blockly.Msg.WIFISERVER_LIST = "創建陣列";
Blockly.Msg.WIFISERVER_RECEIVE = "服務器接收數據";
Blockly.Msg.WIFISERVER_RECEIVE_GET = "從";
Blockly.Msg.WIFISERVER_RECEIVE_GET_INT = "數字";
Blockly.Msg.WIFISERVER_RECEIVE_GET_LINE2 = "獲取第";
Blockly.Msg.WIFISERVER_RECEIVE_GET_LINE3 = "位的值,類型爲";
Blockly.Msg.WIFISERVER_RECEIVE_GET_STRING = "字串";
Blockly.Msg.WIFISERVER_RECEIVE_LENGTH = "長度爲";
Blockly.Msg.WIFISERVER_RECEIVE_TO = "並存儲到";
Blockly.Msg.WIFISERVER_SEND = "服務器發送數據";
Blockly.Msg.WIFISERVER_SERVERSEND = "服務器 推送 ";
Blockly.Msg.WIFISERVER_SERVERSEND_CODE = "HTTP 狀態碼";
Blockly.Msg.WIFISERVER_SERVERSEND_CONTENT = "內容";
Blockly.Msg.WIFISERVER_SERVERSEND_TYPE = "類型";
Blockly.Msg.WIFISERVER_SETROOTPAGE = "設定主頁";
Blockly.Msg.WIFISERVER_SETROUTER = "服務器路由";
Blockly.Msg.WIFISERVER_SETROUTER_ONNOTFOUND = "設定服務器路由當不存在URL時, 處理";
Blockly.Msg.WIFISERVER_SETROUTER_SET = "設定路由";
Blockly.Msg.WIFISERVER_SETROUTER_WITH = "響應";
Blockly.Msg.WIFISERVER_SETUP = "服務器初始化";
Blockly.Msg.WIFISERVER_WAIT_CONNECTION = "等待連接";
Blockly.Msg.WIFIWEBSERVICES_IFTTT = "Web服務 IFTTT";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_EVENT = "Event";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_KEY = "Api-Key ";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_KEY1 = "Key1";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_KEY2 = "Key2";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_KEY3 = "Key3";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_VALUE1 = "Value1";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_VALUE2 = "Value2";
Blockly.Msg.WIFIWEBSERVICES_IFTTT_SET_VALUE3 = "Value3";
Blockly.Msg.WIFIWEBSERVICES_THINKSPEAK = "Web服務 Thinkspeak";
Blockly.Msg.WIFIWEBSERVICES_THINKSPEAK_SET_FIELD1 = "Field";
Blockly.Msg.WIFIWEBSERVICES_THINKSPEAK_SET_KEY = "Api-key";
Blockly.Msg.WIFIWEBSERVICES_THINKSPEAK_SET_VALUE = "Value";
Blockly.Msg.WIFI_RECEIVEMSG = "接收數據至";
Blockly.Msg.WIFI_RECEIVEMSG_ISSUCCESS = "接收數據成功";
Blockly.Msg.WIFI_RECEIVEMSG_LENGTH = ", 數據長度 ";
Blockly.Msg.WIFI_SENDMSG = "發送數據 ";
Blockly.Msg.WIFI_SENDMSG_LENGTH = ", 數據長度 ";
Blockly.Msg.WIFI_SETUP = "輸出傳輸初始化";
Blockly.Msg.Wednesday = "周三";
Blockly.Msg.PROCEDURES_DEFRETURN_TITLE = Blockly.Msg.PROCEDURES_DEFNORETURN_TITLE;
Blockly.Msg.CONTROLS_IF_IF_TITLE_IF = Blockly.Msg.CONTROLS_IF_MSG_IF;
Blockly.Msg.CONTROLS_WHILEUNTIL_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.CONTROLS_IF_MSG_THEN = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.CONTROLS_IF_ELSE_TITLE_ELSE = Blockly.Msg.CONTROLS_IF_MSG_ELSE;
Blockly.Msg.PROCEDURES_DEFRETURN_PROCEDURE = Blockly.Msg.PROCEDURES_DEFNORETURN_PROCEDURE;
Blockly.Msg.LISTS_GET_SUBLIST_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.LISTS_GET_INDEX_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.MATH_CHANGE_TITLE_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.PROCEDURES_DEFRETURN_DO = Blockly.Msg.PROCEDURES_DEFNORETURN_DO;
Blockly.Msg.CONTROLS_IF_ELSEIF_TITLE_ELSEIF = Blockly.Msg.CONTROLS_IF_MSG_ELSEIF;
Blockly.Msg.LISTS_GET_INDEX_HELPURL = Blockly.Msg.LISTS_INDEX_OF_HELPURL;
Blockly.Msg.CONTROLS_FOREACH_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.LISTS_SET_INDEX_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.CONTROLS_FOR_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.LISTS_CREATE_WITH_ITEM_TITLE = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.TEXT_APPEND_VARIABLE = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.TEXT_CREATE_JOIN_ITEM_TITLE_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.LISTS_INDEX_OF_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.PROCEDURES_DEFRETURN_COMMENT = Blockly.Msg.PROCEDURES_DEFNORETURN_COMMENT;


Blockly.Msg.ADD_COMMENT = "加入註解";
Blockly.Msg.AIYBOARD_AIY_BOARD = "AIY Board"; // untranslated
Blockly.Msg.AIYBOARD_BUTTON_FROM = "from"; // untranslated
Blockly.Msg.AIYBOARD_BUTTON_WHEN = "when button"; // untranslated
Blockly.Msg.AIYBOARD_FROM = "from aiy.board"; // untranslated
Blockly.Msg.AIYBOARD_IMPORT = "import"; // untranslated
Blockly.Msg.AIYBOARD_LED_STATE = "get LED state of"; // untranslated
Blockly.Msg.AIYBOARD_LED_STATUS = "get LED status of"; // untranslated
Blockly.Msg.CAMERA_CAMERA = "camera"; // untranslated
Blockly.Msg.CAMERA_DO = "Do"; // untranslated
Blockly.Msg.CAMERA_FPS = "fps"; // untranslated
Blockly.Msg.CAMERA_FRAME_RATE = "Frame Rete:"; // untranslated
Blockly.Msg.CAMERA_IMPORT = "import piCamera"; // untranslated
Blockly.Msg.CAMERA_RESOLUTION = "Resolution"; // untranslated
Blockly.Msg.CAMERA_SENSOR_MODE = "Sensor Mode:"; // untranslated
Blockly.Msg.CAMERA_SET_BOUNDING = "Set bounding box:"; // untranslated
Blockly.Msg.CAMERA_USE_AS = "Use PiCamera as"; // untranslated
Blockly.Msg.CHANGE_VALUE_TITLE = "修改值:";
Blockly.Msg.CLEAN_UP = "清理積木";
Blockly.Msg.COLLAPSE_ALL = "收合積木";
Blockly.Msg.COLLAPSE_BLOCK = "收合積木";
Blockly.Msg.COLOUR_BLEND_COLOUR1 = "顏色 1";
Blockly.Msg.COLOUR_BLEND_COLOUR2 = "顏色 2";
Blockly.Msg.COLOUR_BLEND_HELPURL = "http://meyerweb.com/eric/tools/color-blend/"; // untranslated
Blockly.Msg.COLOUR_BLEND_RATIO = "比例";
Blockly.Msg.COLOUR_BLEND_TITLE = "混合";
Blockly.Msg.COLOUR_BLEND_TOOLTIP = "透過一個比率 (0.0-1.0)來混合兩種顏色。";
Blockly.Msg.COLOUR_PICKER_HELPURL = "https://zh.wikipedia.org/wiki/顏色";
Blockly.Msg.COLOUR_PICKER_TOOLTIP = "從調色板中選擇壹種顏色。";
Blockly.Msg.COLOUR_RANDOM_HELPURL = "http://randomcolour.com"; // untranslated
Blockly.Msg.COLOUR_RANDOM_TITLE = "隨機顏色";
Blockly.Msg.COLOUR_RANDOM_TOOLTIP = "隨機選擇壹種顏色。";
Blockly.Msg.COLOUR_RGB_BLUE = "藍";
Blockly.Msg.COLOUR_RGB_GREEN = "綠";
Blockly.Msg.COLOUR_RGB_HELPURL = "http://www.december.com/html/spec/colorper.html"; // untranslated
Blockly.Msg.COLOUR_RGB_RED = "紅";
Blockly.Msg.COLOUR_RGB_TITLE = "顏色";
Blockly.Msg.COLOUR_RGB_TOOLTIP = "透過指定紅、綠、 藍色的值來建立壹種顏色。所有的值必須介於 0 和 100 之間。";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_HELPURL = "https://github.com/google/blockly/wiki/Loops#loop-termination-blocks"; // untranslated
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_OPERATOR_BREAK = "停止 迴圈";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_OPERATOR_CONTINUE = "繼續下一個 迴圈";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_TOOLTIP_BREAK = "離開當前的 迴圈";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_TOOLTIP_CONTINUE = "跳過這個迴圈的其餘步驟，並繼續下壹次的迴圈運算。";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_WARNING = "警告： 此積木僅可用於迴圈內。";
Blockly.Msg.CONTROLS_FOREACH_HELPURL = "https://github.com/google/blockly/wiki/Loops#for-each"; // untranslated
Blockly.Msg.CONTROLS_FOREACH_TITLE = "在陣列 %2 中以 %1 遍歷每個項目";
Blockly.Msg.CONTROLS_FOREACH_TOOLTIP = "遍歷每個陣列中的項目，將變數 '%1' 設定到該項目中，然後執行某些語句";
Blockly.Msg.CONTROLS_FOR_HELPURL = "https://github.com/google/blockly/wiki/Loops#count-with"; // untranslated
Blockly.Msg.CONTROLS_FOR_TITLE = "使用 %1 從範圍 %2 到 %3 每隔 %4";
Blockly.Msg.CONTROLS_FOR_TOOLTIP = "從起始數到結尾數中取出變數 \"%1\" 的值，按指定的時間間隔，執行指定的積木。";
Blockly.Msg.CONTROLS_IF_ELSEIF_TOOLTIP = "將條件添加到'如果'積木。";
Blockly.Msg.CONTROLS_IF_ELSE_TOOLTIP = "加入一個最終，所有條件下都都執行的區塊到'如果'積木中";
Blockly.Msg.CONTROLS_IF_HELPURL = "https://github.com/google/blockly/wiki/IfElse"; // untranslated
Blockly.Msg.CONTROLS_IF_IF_TOOLTIP = "添加、 刪除或重新排列各區塊來此重新配置這個'如果'積木。";
Blockly.Msg.CONTROLS_IF_MSG_ELSE = "否則";
Blockly.Msg.CONTROLS_IF_MSG_ELSEIF = "否則如果";
Blockly.Msg.CONTROLS_IF_MSG_IF = "如果";
Blockly.Msg.CONTROLS_IF_TOOLTIP_1 = "當值為真時，執行壹些語句";
Blockly.Msg.CONTROLS_IF_TOOLTIP_2 = "當值為真時，執行首個語句，否則則執行第二個語句";
Blockly.Msg.CONTROLS_IF_TOOLTIP_3 = "如果首個值為真，則執行首個語句。否則當第二個值為真時，則執行第二個語句";
Blockly.Msg.CONTROLS_IF_TOOLTIP_4 = "如果首個值為真，則執行首個語句。否則當第二個值為真時，則執行第二個語句。如果前幾個敘述都不為真，則執行最後一個語句";
Blockly.Msg.CONTROLS_REPEAT_HELPURL = "https://zh.wikipedia.org/wiki/For迴圈";
Blockly.Msg.CONTROLS_REPEAT_INPUT_DO = "執行";
Blockly.Msg.CONTROLS_REPEAT_TITLE = "重複 %1 次";
Blockly.Msg.CONTROLS_REPEAT_TOOLTIP = "多次執行壹些語句";
Blockly.Msg.CONTROLS_WHILEUNTIL_HELPURL = "https://github.com/google/blockly/wiki/Loops#repeat"; // untranslated
Blockly.Msg.CONTROLS_WHILEUNTIL_OPERATOR_UNTIL = "重複 直到";
Blockly.Msg.CONTROLS_WHILEUNTIL_OPERATOR_WHILE = "重複 當";
Blockly.Msg.CONTROLS_WHILEUNTIL_TOOLTIP_UNTIL = "當值為否時，執行壹些語句";
Blockly.Msg.CONTROLS_WHILEUNTIL_TOOLTIP_WHILE = "當值為真時，執行壹些語句";
Blockly.Msg.DELETE_ALL_BLOCKS = "刪除共 %1 塊積木？";
Blockly.Msg.DELETE_BLOCK = "刪除積木";
Blockly.Msg.DELETE_VARIABLE = "刪除%1變數";
Blockly.Msg.DELETE_VARIABLE_CONFIRMATION = "刪除%1使用的%2變數？";
Blockly.Msg.DELETE_X_BLOCKS = "刪除 %1 塊積木";
Blockly.Msg.DICTS_CREATE_EMPTY_TITLE = "empty dictionary"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_CONTAINER_TITLE_ADD = "Create Dictionary"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_CONTAINER_TOOLTIP = ""; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_INPUT_WITH = "create dict with"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_KEY = "key"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_MAPPING = ":"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_TITLE = "key/value"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_TOOLTIP = ""; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_TOOLTIP = ""; // untranslated
Blockly.Msg.DICT_GET = "get key"; // untranslated
Blockly.Msg.DICT_GET_TO = "of"; // untranslated
// Blockly.Msg.DICT_KEYS = "get all keys from"; // untranslated
Blockly.Msg.DISABLE_BLOCK = "停用積木";
Blockly.Msg.DUPLICATE_BLOCK = "複製";
Blockly.Msg.ENABLE_BLOCK = "啟用積木";
Blockly.Msg.EXPAND_ALL = "展開積木";
Blockly.Msg.EXPAND_BLOCK = "展開積木";
Blockly.Msg.EXTERNAL_INPUTS = "多行輸入";
Blockly.Msg.HELP = "說明";
Blockly.Msg.INLINE_INPUTS = "單行輸入";
Blockly.Msg.LISTS_APPEND = "append item"; // untranslated
Blockly.Msg.LISTS_APPEND_HELPURL = "http://google.com"; // untranslated
Blockly.Msg.LISTS_APPEND_TO = "to list"; // untranslated
Blockly.Msg.LISTS_APPEND_TOOLTIP = "Append an element to a list"; // untranslated
Blockly.Msg.LISTS_CREATE_EMPTY_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-empty-list"; // untranslated
Blockly.Msg.LISTS_CREATE_EMPTY_TITLE = "建立空陣列";
Blockly.Msg.LISTS_CREATE_EMPTY_TOOLTIP = "返回一個長度為 0 的陣列，不包含任何資料記錄";
Blockly.Msg.LISTS_CREATE_WITH_CONTAINER_TITLE_ADD = "陣列";
Blockly.Msg.LISTS_CREATE_WITH_CONTAINER_TOOLTIP = "添加、 刪除或重新排列各區塊來此重新配置這個 陣列 積木。";
Blockly.Msg.LISTS_CREATE_WITH_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-list-with"; // untranslated
Blockly.Msg.LISTS_CREATE_WITH_INPUT_WITH = "使用這些值建立陣列";
Blockly.Msg.LISTS_CREATE_WITH_ITEM_TOOLTIP = "將一個項目加入到陣列中。";
Blockly.Msg.LISTS_CREATE_WITH_TOOLTIP = "建立一個具備任意數量項目的陣列。";
Blockly.Msg.LISTS_GET_INDEX_FIRST = "首個筆";
Blockly.Msg.LISTS_GET_INDEX_FROM_END = "倒數第#筆";
Blockly.Msg.LISTS_GET_INDEX_FROM_START = "#"; // untranslated
Blockly.Msg.LISTS_GET_INDEX_GET = "取值";
Blockly.Msg.LISTS_GET_INDEX_GET_REMOVE = "取出並移除";
Blockly.Msg.LISTS_GET_INDEX_LAST = "最後壹筆";
Blockly.Msg.LISTS_GET_INDEX_RANDOM = "隨機";
Blockly.Msg.LISTS_GET_INDEX_REMOVE = "移除";
Blockly.Msg.LISTS_GET_INDEX_TAIL = ""; // untranslated
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_FIRST = "返回陣列中的首個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_FROM = "返回在陣列中的指定位置的項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_LAST = "返回陣列中的最後一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_RANDOM = "返回陣列中隨機的一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FIRST = "移除並返回陣列中的首個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FROM = "移除並返回陣列中的指定位置的項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_LAST = "移除並返回陣列中的最後一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_RANDOM = "移除並返回陣列中的隨機一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_FIRST = "移除陣列中的首個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_FROM = "移除在陣列中的指定位置的項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_LAST = "移除陣列中的最後一個項目";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_RANDOM = "移除陣列中隨機的一個項目";
Blockly.Msg.LISTS_GET_SUBLIST_END_FROM_END = "到 倒數 # 位";
Blockly.Msg.LISTS_GET_SUBLIST_END_FROM_START = "到 #";
Blockly.Msg.LISTS_GET_SUBLIST_END_LAST = "到 最後";
Blockly.Msg.LISTS_GET_SUBLIST_HELPURL = "https://github.com/google/blockly/wiki/Lists#getting-a-sublist"; // untranslated
Blockly.Msg.LISTS_GET_SUBLIST_START_FIRST = "從 頭 取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_START_FROM_END = "從倒數 # 取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_START_FROM_START = "從 # 取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_TAIL = ""; // untranslated
Blockly.Msg.LISTS_GET_SUBLIST_TOOLTIP = "複製陣列中指定的部分。";
Blockly.Msg.LISTS_INDEX_FROM_END_TOOLTIP = "%1 是最後一個項目。";
Blockly.Msg.LISTS_INDEX_FROM_START_TOOLTIP = "%1 是首個項目。";
Blockly.Msg.LISTS_INDEX_OF_FIRST = "找出 首個 項目出現";
Blockly.Msg.LISTS_INDEX_OF_HELPURL = "https://github.com/google/blockly/wiki/Lists#getting-items-from-a-list"; // untranslated
Blockly.Msg.LISTS_INDEX_OF_LAST = "找出 最後一個 項目出現";
Blockly.Msg.LISTS_INDEX_OF_TOOLTIP = "返回在陣列中的首個/最後一個匹配項目的索引值。如果未找到則返回 %1。";
Blockly.Msg.LISTS_INLIST = "自陣列";
Blockly.Msg.LISTS_ISEMPTY_HELPURL = "https://github.com/google/blockly/wiki/Lists#is-empty"; // untranslated
Blockly.Msg.LISTS_ISEMPTY_TITLE = "%1 值為空";
Blockly.Msg.LISTS_ISEMPTY_TOOLTIP = "如果該陣列為空，則返回 真。";
Blockly.Msg.LISTS_LENGTH_HELPURL = "https://github.com/google/blockly/wiki/Lists#length-of"; // untranslated
Blockly.Msg.LISTS_LENGTH_TITLE = "長度 %1";
Blockly.Msg.LISTS_LENGTH_TOOLTIP = "返回陣列的長度。";
Blockly.Msg.LISTS_REPEAT_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-list-with"; // untranslated
Blockly.Msg.LISTS_REPEAT_TITLE = "建立陣列使用項目 %1 重複 %2 次數";
Blockly.Msg.LISTS_REPEAT_TOOLTIP = "建立包含指定重複次數的 值 的陣列。";
Blockly.Msg.LISTS_SET_INDEX_HELPURL = "https://github.com/google/blockly/wiki/Lists#in-list--set"; // untranslated
Blockly.Msg.LISTS_SET_INDEX_INPUT_TO = "為";
Blockly.Msg.LISTS_SET_INDEX_INSERT = "插入在";
Blockly.Msg.LISTS_SET_INDEX_SET = "設定";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_FIRST = "在陣列的起始處添加一個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_FROM = "插入在陣列中的指定位置的項目。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_LAST = "在陣列的尾端加入一個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_RANDOM = "在陣列中隨機插入項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_FIRST = "設定陣列中的首個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_FROM = "設定在陣列中的指定位置的項目。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_LAST = "設定陣列中的最後一個項目";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_RANDOM = "設定陣列中隨機的一個項目";
Blockly.Msg.LISTS_SORT_HELPURL = "https://github.com/google/blockly/wiki/Lists#sorting-a-list";
Blockly.Msg.LISTS_SORT_ORDER_ASCENDING = "升冪排序";
Blockly.Msg.LISTS_SORT_ORDER_DESCENDING = "降冪排序";
Blockly.Msg.LISTS_SORT_TITLE = "依%1%2%3排序";
Blockly.Msg.LISTS_SORT_TOOLTIP = "排序字典的複製內容";
Blockly.Msg.LISTS_SORT_TYPE_IGNORECASE = "依字母排序並忽略大小寫";
Blockly.Msg.LISTS_SORT_TYPE_NUMERIC = "依數字排序";
Blockly.Msg.LISTS_SORT_TYPE_TEXT = "依字母排序";
Blockly.Msg.LISTS_SPLIT_HELPURL = "https://github.com/google/blockly/wiki/Lists#splitting-strings-and-joining-lists"; // untranslated
Blockly.Msg.LISTS_SPLIT_LIST_FROM_TEXT = "從文本製作陣列";
Blockly.Msg.LISTS_SPLIT_TEXT_FROM_LIST = "從陣列拆出文本";
Blockly.Msg.LISTS_SPLIT_TOOLTIP_JOIN = "串起文本陣列成一個文本，由分隔符分隔。";
Blockly.Msg.LISTS_SPLIT_TOOLTIP_SPLIT = "拆分文本到文本陣列，按每個分隔符拆分。";
Blockly.Msg.LISTS_SPLIT_WITH_DELIMITER = "用分隔符";
Blockly.Msg.LOGGING_CONF = "Logging Basic config"; // untranslated
Blockly.Msg.LOGGING_CONFIG = "logging config"; // untranslated
Blockly.Msg.LOGGING_CONFIG_LEVEL = "level ="; // untranslated
Blockly.Msg.LOGGING_IMPORT = "import logging"; // untranslated
Blockly.Msg.LOGGING_INFO = "Logging info"; // untranslated
Blockly.Msg.LOGGING_SETUP = "Logging Setup"; // untranslated
Blockly.Msg.LOGIC_BOOLEAN_FALSE = "否";
Blockly.Msg.LOGIC_BOOLEAN_HELPURL = "https://github.com/google/blockly/wiki/Logic#values"; // untranslated
Blockly.Msg.LOGIC_BOOLEAN_TOOLTIP = "返回 真 或 否。";
Blockly.Msg.LOGIC_BOOLEAN_TRUE = "真";
Blockly.Msg.LOGIC_COMPARE_HELPURL = "https://zh.wikipedia.org/wiki/不等";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_EQ = "如果這兩個輸入區塊內容相等，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_GT = "如果首個輸入大於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_GTE = "如果首個輸入大於或等於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_LT = "如果首個輸入小於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_LTE = "如果首個輸入是小於或等於第二個輸入，返回 真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_NEQ = "如果這兩個輸入區塊內容不相等，返回 真。";
Blockly.Msg.LOGIC_NEGATE_HELPURL = "https://github.com/google/blockly/wiki/Logic#not"; // untranslated
Blockly.Msg.LOGIC_NEGATE_TITLE = "非 %1";
Blockly.Msg.LOGIC_NEGATE_TOOLTIP = "如果輸入的值是 否，則返回 真。如果輸入的值是 真 返回 否。";
Blockly.Msg.LOGIC_NULL = "空";
Blockly.Msg.LOGIC_NULL_HELPURL = "https://en.wikipedia.org/wiki/Nullable_type"; // untranslated
Blockly.Msg.LOGIC_NULL_TOOLTIP = "返回 空。";
Blockly.Msg.LOGIC_OPERATION_AND = "且";
Blockly.Msg.LOGIC_OPERATION_HELPURL = "https://github.com/google/blockly/wiki/Logic#logical-operations"; // untranslated
Blockly.Msg.LOGIC_OPERATION_OR = "或";
Blockly.Msg.LOGIC_OPERATION_TOOLTIP_AND = "如果這兩個輸入值都為 真，則返回 真。";
Blockly.Msg.LOGIC_OPERATION_TOOLTIP_OR = "如果至少一個輸入的值為 真，返回 真。";
Blockly.Msg.LOGIC_TERNARY_CONDITION = "測試";
Blockly.Msg.LOGIC_TERNARY_HELPURL = "https://zh.wikipedia.org/wiki/條件運算符";
Blockly.Msg.LOGIC_TERNARY_IF_FALSE = "如果為非";
Blockly.Msg.LOGIC_TERNARY_IF_TRUE = "如果為真";
Blockly.Msg.LOGIC_TERNARY_TOOLTIP = "檢查 'test' 中的條件。如果條件為 真，將返回 '如果為 真' 值 ;否則，返回 '如果為 否' 的值。";
Blockly.Msg.LOOP_FOREACH_ITEM = "for each item"; // untranslated
Blockly.Msg.LOOP_FOREACH_LIST = "in list"; // untranslated
Blockly.Msg.MATH_ADDITION_SYMBOL = "+"; // untranslated
Blockly.Msg.MATH_ARITHMETIC_HELPURL = "https://zh.wikipedia.org/wiki/算術";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_ADD = "返回兩個數字的總和。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_DIVIDE = "返回兩個數字的商。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_MINUS = "返回兩個數字的差。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_MULTIPLY = "返回兩個數字的乘積。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_POWER = "返回第二個數字的指數的首個數字。";
Blockly.Msg.MATH_CHANGE_HELPURL = "https://zh.wikipedia.org/wiki/加法";
Blockly.Msg.MATH_CHANGE_TITLE = "修改 %1 自 %2";
Blockly.Msg.MATH_CHANGE_TOOLTIP = "將數字添加到變數 '%1'。";
Blockly.Msg.MATH_CONSTANT_HELPURL = "https://zh.wikipedia.org/wiki/數學常數";
Blockly.Msg.MATH_CONSTANT_TOOLTIP = "返回一個的常見常量： π (3.141......)，e (2.718...)、 φ (1.618...)、 開方(2) (1.414......)、 開方(½) (0.707......) 或 ∞ （無窮大）。";
Blockly.Msg.MATH_CONSTRAIN_HELPURL = "https://en.wikipedia.org/wiki/Clamping_%28graphics%29"; // untranslated
Blockly.Msg.MATH_CONSTRAIN_TITLE = "限制數字 %1 介於 (低) %2 到 (高) %3";
Blockly.Msg.MATH_CONSTRAIN_TOOLTIP = "限制數字介於兩個指定的數字之間";
Blockly.Msg.MATH_DIVISION_SYMBOL = "÷"; // untranslated
Blockly.Msg.MATH_IS_DIVISIBLE_BY = "可被整除";
Blockly.Msg.MATH_IS_EVEN = "是偶數";
Blockly.Msg.MATH_IS_NEGATIVE = "是負值";
Blockly.Msg.MATH_IS_ODD = "是奇數";
Blockly.Msg.MATH_IS_POSITIVE = "是正值";
Blockly.Msg.MATH_IS_PRIME = "是質數";
Blockly.Msg.MATH_IS_TOOLTIP = "如果數字是偶數，奇數，非負整數，正數、 負數或如果它是可被某數字整除，則返回 真 或 否。";
Blockly.Msg.MATH_IS_WHOLE = "是非負整數";
Blockly.Msg.MATH_MODULO_HELPURL = "https://zh.wikipedia.org/wiki/模除";
Blockly.Msg.MATH_MODULO_TITLE = "取餘數自 %1 ÷ %2";
Blockly.Msg.MATH_MODULO_TOOLTIP = "回傳兩個數字相除的餘數";
Blockly.Msg.MATH_MULTIPLICATION_SYMBOL = "×"; // untranslated
Blockly.Msg.MATH_NUMBER_HELPURL = "https://zh.wikipedia.org/wiki/數";
Blockly.Msg.MATH_NUMBER_TOOLTIP = "一個數字。";
Blockly.Msg.MATH_ONLIST_HELPURL = ""; // untranslated
Blockly.Msg.MATH_ONLIST_OPERATOR_AVERAGE = "平均值 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MAX = "最大值 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MEDIAN = "中位數 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MIN = "最小值 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_MODE = "比較眾數 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_RANDOM = "隨機抽取 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_STD_DEV = "標準差 自陣列";
Blockly.Msg.MATH_ONLIST_OPERATOR_SUM = "總和 自陣列";
Blockly.Msg.MATH_ONLIST_TOOLTIP_AVERAGE = "返回陣列中數值的平均值 （算術平均值）。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MAX = "返回陣列中的最大數字。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MEDIAN = "返回陣列中數值的中位數。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MIN = "返回陣列中的最小數字。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MODE = "返回一個陣列中的最常見項目的陣列。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_RANDOM = "從陣列中返回一個隨機的項目。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_STD_DEV = "返回陣列中數字的標準差。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_SUM = "返回陣列中的所有數字的總和。";
Blockly.Msg.MATH_POWER_SYMBOL = "^"; // untranslated
Blockly.Msg.MATH_RANDOM_FLOAT_HELPURL = "https://zh.wikipedia.org/wiki/隨機數生成器";
Blockly.Msg.MATH_RANDOM_FLOAT_TITLE_RANDOM = "取隨機分數";
Blockly.Msg.MATH_RANDOM_FLOAT_TOOLTIP = "返回介於 （包含） 0.0 到 1.0 之間的隨機數。";
Blockly.Msg.MATH_RANDOM_INT_HELPURL = "https://zh.wikipedia.org/wiki/隨機數生成器";
Blockly.Msg.MATH_RANDOM_INT_TITLE = "取隨機整數介於 (低) %1 到 %2";
Blockly.Msg.MATH_RANDOM_INT_TOOLTIP = "回傳限制的數字區間內的隨機數字";
Blockly.Msg.MATH_ROUND_HELPURL = "https://zh.wikipedia.org/wiki/數值簡化";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUND = "四捨五入";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUNDDOWN = "無條件捨去";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUNDUP = "無條件進位";
Blockly.Msg.MATH_ROUND_TOOLTIP = "將數字向上或向下舍入。";
Blockly.Msg.MATH_SINGLE_HELPURL = "https://zh.wikipedia.org/wiki/平方根";
Blockly.Msg.MATH_SINGLE_OP_ABSOLUTE = "絕對值";
Blockly.Msg.MATH_SINGLE_OP_ROOT = "開根號";
Blockly.Msg.MATH_SINGLE_TOOLTIP_ABS = "返回指定數字的絕對值。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_EXP = "返回指定數字指數的 e";
Blockly.Msg.MATH_SINGLE_TOOLTIP_LN = "返回指定數字的自然對數。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_LOG10 = "返回指定數字的對數。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_NEG = "返回指定數字的 negation。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_POW10 = "返回指定數字指數的10的冪次。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_ROOT = "返回指定數字的平方根。";
Blockly.Msg.MATH_SUBTRACTION_SYMBOL = "-"; // untranslated
Blockly.Msg.MATH_SUM = "Sum"; // untranslated
Blockly.Msg.MATH_TRIG_ACOS = "acos"; // untranslated
Blockly.Msg.MATH_TRIG_ASIN = "asin"; // untranslated
Blockly.Msg.MATH_TRIG_ATAN = "atan"; // untranslated
Blockly.Msg.MATH_TRIG_COS = "cos"; // untranslated
Blockly.Msg.MATH_TRIG_HELPURL = "https://zh.wikipedia.org/wiki/三角函數";
Blockly.Msg.MATH_TRIG_SIN = "sin"; // untranslated
Blockly.Msg.MATH_TRIG_TAN = "tan"; // untranslated
Blockly.Msg.MATH_TRIG_TOOLTIP_ACOS = "返回指定角度的反餘弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_ASIN = "返回指定角度的反正弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_ATAN = "返回指定角度的反正切值。";
Blockly.Msg.MATH_TRIG_TOOLTIP_COS = "返回指定角度的餘弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_SIN = "返回指定角度的正弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_TAN = "返回指定角度的正切值(非弧度）。";
Blockly.Msg.NEW_VARIABLE = "建立變數...";
Blockly.Msg.NEW_VARIABLE_TITLE = "新變數名稱:";
Blockly.Msg.ORDINAL_NUMBER_SUFFIX = ""; // untranslated
Blockly.Msg.PLATFORM_IMPORT = "import platform"; // untranslated
Blockly.Msg.PROCEDURES_ALLOW_STATEMENTS = "允許語句";
Blockly.Msg.PROCEDURES_BEFORE_PARAMS = "與：";
Blockly.Msg.PROCEDURES_CALLNORETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程式";
Blockly.Msg.PROCEDURES_CALLNORETURN_TOOLTIP = "執行使用者定義的函數 '%1'。";
Blockly.Msg.PROCEDURES_CALLRETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程式";
Blockly.Msg.PROCEDURES_CALLRETURN_TOOLTIP = "執行使用者定義的函數 '%1' 並使用它的回傳值";
Blockly.Msg.PROCEDURES_CALL_BEFORE_PARAMS = "與：";
Blockly.Msg.PROCEDURES_CREATE_DO = "建立 '%1'";
Blockly.Msg.PROCEDURES_DEFNORETURN_COMMENT = "描述此函數...";
Blockly.Msg.PROCEDURES_DEFNORETURN_DO = ""; // untranslated
Blockly.Msg.PROCEDURES_DEFNORETURN_HELPURL = "https://en.wikipedia.org/wiki/Procedure_%28computer_science%29"; // untranslated
Blockly.Msg.PROCEDURES_DEFNORETURN_PROCEDURE = "流程";
Blockly.Msg.PROCEDURES_DEFNORETURN_TITLE = "到";
Blockly.Msg.PROCEDURES_DEFNORETURN_TOOLTIP = "創建一個無回傳值的函數。";
Blockly.Msg.PROCEDURES_DEFRETURN_HELPURL = "https://en.wikipedia.org/wiki/Procedure_%28computer_science%29"; // untranslated
Blockly.Msg.PROCEDURES_DEFRETURN_RETURN = "回傳";
Blockly.Msg.PROCEDURES_DEFRETURN_TOOLTIP = "創建一個有回傳值的函數。";
Blockly.Msg.PROCEDURES_DEF_DUPLICATE_WARNING = "警告: 此函數中有重複的參數。";
Blockly.Msg.PROCEDURES_HIGHLIGHT_DEF = "反白顯示函式定義";
Blockly.Msg.PROCEDURES_IFRETURN_HELPURL = "http://c2.com/cgi/wiki?GuardClause"; // untranslated
Blockly.Msg.PROCEDURES_IFRETURN_TOOLTIP = "如果值為 真，則返回第二個值。";
Blockly.Msg.PROCEDURES_IFRETURN_WARNING = "警告: 此積木僅可在定義函式時使用。";
Blockly.Msg.PROCEDURES_MAINFUNCTION = "Define Main function"; // untranslated
Blockly.Msg.PROCEDURES_MUTATORARG_TITLE = "變數:";
Blockly.Msg.PROCEDURES_MUTATORARG_TOOLTIP = "添加函數輸入。";
Blockly.Msg.PROCEDURES_MUTATORCONTAINER_TITLE = "參數";
Blockly.Msg.PROCEDURES_MUTATORCONTAINER_TOOLTIP = "添加、刪除或重新排列此函數的輸入。";
Blockly.Msg.REDO = "重試";
Blockly.Msg.REMOVE_COMMENT = "移除註解";
Blockly.Msg.RENAME_VARIABLE = "重新命名變數...";
Blockly.Msg.RENAME_VARIABLE_TITLE = "將所有 \"%1\" 變數重新命名為:";
Blockly.Msg.REQUEST_DATA = "data"; // untranslated
Blockly.Msg.REQUEST_IMPORT = "import requests"; // untranslated
Blockly.Msg.REQUEST_POST_DATATYPE = "Request Post Data: JSON"; // untranslated
Blockly.Msg.REQUEST_SET_URL = "Set URL:"; // untranslated
Blockly.Msg.SYSTEM_EXIT = "Sys.exit"; // untranslated
Blockly.Msg.SYSTEM_IMPORT = "import sys"; // untranslated
Blockly.Msg.TEXT_APPEND_APPENDTEXT = "後加入字串";
Blockly.Msg.TEXT_APPEND_HELPURL = "https://github.com/google/blockly/wiki/Text#text-modification"; // untranslated
Blockly.Msg.TEXT_APPEND_TO = "在";
Blockly.Msg.TEXT_APPEND_TOOLTIP = "將壹些字串追加到變數 '%1'。";
Blockly.Msg.TEXT_CHANGECASE_HELPURL = "https://github.com/google/blockly/wiki/Text#adjusting-text-case"; // untranslated
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_LOWERCASE = "轉成 小寫";
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_TITLECASE = "轉成 首字母大寫";
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_UPPERCASE = "轉成 大寫";
Blockly.Msg.TEXT_CHANGECASE_TOOLTIP = "使用不同的大小寫複製這段字串。";
Blockly.Msg.TEXT_CHARAT_FIRST = "取首個字元";
Blockly.Msg.TEXT_CHARAT_FROM_END = "取得 倒數第 # 個字元";
Blockly.Msg.TEXT_CHARAT_FROM_START = "取得 字元 #";
Blockly.Msg.TEXT_CHARAT_HELPURL = "https://github.com/google/blockly/wiki/Text#extracting-text"; // untranslated
Blockly.Msg.TEXT_CHARAT_INPUT_INTEXT = "的字元在字串";
Blockly.Msg.TEXT_CHARAT_LAST = "取最後一個字元";
Blockly.Msg.TEXT_CHARAT_RANDOM = "取隨機一個字元";
Blockly.Msg.TEXT_CHARAT_TAIL = "";
Blockly.Msg.TEXT_CHARAT_TOOLTIP = "返回位於指定位置的字元。";
Blockly.Msg.TEXT_CREATE_JOIN_ITEM_TOOLTIP = "將一個項目加入到字串中。";
Blockly.Msg.TEXT_CREATE_JOIN_TITLE_JOIN = "加入";
Blockly.Msg.TEXT_CREATE_JOIN_TOOLTIP = "添加、 刪除或重新排列各區塊來此重新配置這個字串積木。";
Blockly.Msg.TEXT_GET_SUBSTRING_END_FROM_END = "到 倒數第 # 個字元";
Blockly.Msg.TEXT_GET_SUBSTRING_END_FROM_START = "到 字元 #";
Blockly.Msg.TEXT_GET_SUBSTRING_END_LAST = "到 最後一個字元";
Blockly.Msg.TEXT_GET_SUBSTRING_HELPURL = "https://github.com/google/blockly/wiki/Text#extracting-a-region-of-text"; // untranslated
Blockly.Msg.TEXT_GET_SUBSTRING_INPUT_IN_TEXT = "自字串";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FIRST = "取得段落字串 自 首個字元";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FROM_END = "取得段落字串自 #";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FROM_START = "取得段落字串自 #";
Blockly.Msg.TEXT_GET_SUBSTRING_TAIL = ""; // untranslated
Blockly.Msg.TEXT_GET_SUBSTRING_TOOLTIP = "返回指定的部分字串。";
Blockly.Msg.TEXT_INDEXOF_HELPURL = "https://github.com/google/blockly/wiki/Text#finding-text"; // untranslated
Blockly.Msg.TEXT_INDEXOF_INPUT_INTEXT = "在字串";
Blockly.Msg.TEXT_INDEXOF_OPERATOR_FIRST = "尋找 首個 出現的字串";
Blockly.Msg.TEXT_INDEXOF_OPERATOR_LAST = "尋找 最後一個 出現的字串";
Blockly.Msg.TEXT_INDEXOF_TAIL = ""; // untranslated
Blockly.Msg.TEXT_INDEXOF_TOOLTIP = "返回在第二個字串中的首個/最後一個匹配項目的索引值。如果未找到則返回 %1。";
Blockly.Msg.TEXT_ISEMPTY_HELPURL = "https://github.com/google/blockly/wiki/Text#checking-for-empty-text"; // untranslated
Blockly.Msg.TEXT_ISEMPTY_TITLE = "%1 為空";
Blockly.Msg.TEXT_ISEMPTY_TOOLTIP = "如果提供的字串為空，則返回 真。";
Blockly.Msg.TEXT_JOIN_HELPURL = "https://github.com/google/blockly/wiki/Text#text-creation"; // untranslated
Blockly.Msg.TEXT_JOIN_TITLE_CREATEWITH = "建立字串使用";
Blockly.Msg.TEXT_JOIN_TOOLTIP = "通過串起任意數量的項目來建立壹段字串。";
Blockly.Msg.TEXT_LENGTH_HELPURL = "https://github.com/google/blockly/wiki/Text#text-modification"; // untranslated
Blockly.Msg.TEXT_LENGTH_TITLE = "長度 %1";
Blockly.Msg.TEXT_LENGTH_TOOLTIP = "返回這串字串的字元數（含空格） 。";
Blockly.Msg.TEXT_LOWER = "set lower case"; // untranslated
Blockly.Msg.TEXT_PRINT_HELPURL = "https://github.com/google/blockly/wiki/Text#printing-text"; // untranslated
Blockly.Msg.TEXT_PRINT_TITLE = "印出 %1";
Blockly.Msg.TEXT_PRINT_TITLE_PRINT = "print"; // untranslated
Blockly.Msg.TEXT_PRINT_TOOLTIP = "印出指定的字串、 數字或其他值。";
Blockly.Msg.TEXT_PROMPT_HELPURL = "https://github.com/google/blockly/wiki/Text#getting-input-from-the-user"; // untranslated
Blockly.Msg.TEXT_PROMPT_TOOLTIP_NUMBER = "輸入數字";
Blockly.Msg.TEXT_PROMPT_TOOLTIP_TEXT = "輸入字串";
Blockly.Msg.TEXT_PROMPT_TYPE_NUMBER = "輸入 數字 並顯示提示訊息";
Blockly.Msg.TEXT_PROMPT_TYPE_TEXT = "輸入 字串 並顯示提示訊息";
Blockly.Msg.TEXT_TEXT_HELPURL = "https://zh.wikipedia.org/wiki/字串";
Blockly.Msg.TEXT_TEXT_TOOLTIP = "字元、 單詞或壹行字串。";
Blockly.Msg.TEXT_TRIM_HELPURL = "https://github.com/google/blockly/wiki/Text#trimming-removing-spaces"; // untranslated
Blockly.Msg.TEXT_TRIM_OPERATOR_BOTH = "消除兩側空格";
Blockly.Msg.TEXT_TRIM_OPERATOR_LEFT = "消除左側空格";
Blockly.Msg.TEXT_TRIM_OPERATOR_RIGHT = "消除右側空格";
Blockly.Msg.TEXT_TRIM_TOOLTIP = "複製這段字串的同時刪除兩端多餘的空格。";
Blockly.Msg.THREAD_IMPORT = "import threading"; // untranslated
Blockly.Msg.THREAD_SET_TARGET = "threading set target"; // untranslated
Blockly.Msg.THREAD_START = "start"; // untranslated
Blockly.Msg.THREAD_THREADING = "threading"; // untranslated
Blockly.Msg.TODAY = "今天";
Blockly.Msg.TYPE_CHECK = "type of"; // untranslated
Blockly.Msg.UNDO = "還原";
Blockly.Msg.VARIABLES_DEFAULT_NAME = "變數";
Blockly.Msg.VARIABLES_GET_CREATE_SET = "建立 '設定 %1'";
Blockly.Msg.VARIABLES_GET_HELPURL = "https://github.com/google/blockly/wiki/Variables#get"; // untranslated
Blockly.Msg.VARIABLES_GET_SELF = "get self"; // untranslated
Blockly.Msg.VARIABLES_GET_TOOLTIP = "返回此變數的值。";
Blockly.Msg.VARIABLES_SET = "賦值 %1 爲 %2";
Blockly.Msg.VARIABLES_SET_CREATE_GET = "建立 '取得 %1'";
Blockly.Msg.VARIABLES_SET_HELPURL = "https://github.com/google/blockly/wiki/Variables#set"; // untranslated
Blockly.Msg.VARIABLES_SET_SELF = "set self"; // untranslated
Blockly.Msg.VARIABLES_SET_SELF_TO = "to"; // untranslated
Blockly.Msg.VARIABLES_SET_TAIL = "="; // untranslated
Blockly.Msg.VARIABLES_SET_TITLE = "set"; // untranslated
Blockly.Msg.VARIABLES_SET_TOOLTIP = "設定此變數，好和輸入值相等。";
Blockly.Msg.VARIABLE_ALREADY_EXISTS = "一個名為%1的變數已存在。";
Blockly.Msg.VISIONKIT_AIY_VISION_INFERENCE = "AIY Vision Inference"; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR = "Annotator"; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR_BOUNDING = "Annotator Bounding Box"; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR_FILL = "fill="; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR_SETTING = "set dimensions:"; // untranslated
Blockly.Msg.VISIONKIT_CAMERA_INFERENCE = "Camera Inference as"; // untranslated
Blockly.Msg.VISIONKIT_CLOUDEVENT_API = "Cloud Event API:"; // untranslated
Blockly.Msg.VISIONKIT_DO = "Do"; // untranslated
Blockly.Msg.VISIONKIT_GETINFERENCE = "Get Inference"; // untranslated
Blockly.Msg.VISIONKIT_GETMODEL_MODEL = "model"; // untranslated
Blockly.Msg.VISIONKIT_GETMODEL_Of = "of"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT = "from"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT_ANNOTATOR = "annotator import"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT_INFERENCE = "inference import"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT_MODELS = "models import"; // untranslated
Blockly.Msg.VISIONKIT_JOY_DETECT = "Detect Joy Score and stored it to Core Cloud"; // untranslated
Blockly.Msg.VISIONKIT_MODEL = "Model"; // untranslated
Blockly.Msg.VISIONKIT_RUN_INFERENCE = "Run inference"; // untranslated
Blockly.Msg.VISIONKIT_SETUP = "Google AIY Vision Kit Setup"; // untranslated
Blockly.Msg.VISIONKIT_USE_MODEL = "Use model"; // untranslated
Blockly.Msg.VOICEKIT_ASSISTANT = "Assistant"; // untranslated
Blockly.Msg.VOICEKIT_DEMO_1 = "Command Control Demo"; // untranslated
Blockly.Msg.VOICEKIT_DEMO_2 = "Via Google Assistant"; // untranslated
Blockly.Msg.VOICEKIT_EVENTTYPE_ASSISTANT = "Assistant Event Type:"; // untranslated
Blockly.Msg.VOICEKIT_EVENTTYPE_IMPORT = "import EventType"; // untranslated
Blockly.Msg.VOICEKIT_EVENT_ARGS = "event args"; // untranslated
Blockly.Msg.VOICEKIT_EVENT_OF = "of"; // untranslated
Blockly.Msg.VOICEKIT_EVENT_TYPE_OF = "event type of"; // untranslated
Blockly.Msg.VOICEKIT_FROM = "from"; // untranslated
Blockly.Msg.VOICEKIT_GET_CREDENTIAL = "Get Assistant Credential"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_ASSISTANT = "import Assistant"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_AUTH = "import auth_helpers"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_TTS = "import TTS"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_TTS_SAY = "aiy.voice.tts.say"; // untranslated
Blockly.Msg.VOICEKIT_SETUP = "Google AIY Voice Kit Setup"; // untranslated
Blockly.Msg.VOICEKIT_SET_CREDENTIAL = "set credential for Assistant"; // untranslated
Blockly.Msg.VOICEKIT_SET_DO = "do"; // untranslated
Blockly.Msg.VOICEKIT_SET_FROM = "from"; // untranslated
Blockly.Msg.PROCEDURES_DEFRETURN_TITLE = Blockly.Msg.PROCEDURES_DEFNORETURN_TITLE;
Blockly.Msg.CONTROLS_IF_IF_TITLE_IF = Blockly.Msg.CONTROLS_IF_MSG_IF;
Blockly.Msg.CONTROLS_WHILEUNTIL_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.CONTROLS_IF_MSG_THEN = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.CONTROLS_IF_ELSE_TITLE_ELSE = Blockly.Msg.CONTROLS_IF_MSG_ELSE;
Blockly.Msg.PROCEDURES_DEFRETURN_PROCEDURE = Blockly.Msg.PROCEDURES_DEFNORETURN_PROCEDURE;
Blockly.Msg.LISTS_GET_SUBLIST_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.LISTS_GET_INDEX_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.MATH_CHANGE_TITLE_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.VARIABLES_SET_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.PROCEDURES_DEFRETURN_DO = Blockly.Msg.PROCEDURES_DEFNORETURN_DO;
Blockly.Msg.CONTROLS_IF_ELSEIF_TITLE_ELSEIF = Blockly.Msg.CONTROLS_IF_MSG_ELSEIF;
Blockly.Msg.LISTS_GET_INDEX_HELPURL = Blockly.Msg.LISTS_INDEX_OF_HELPURL;
Blockly.Msg.CONTROLS_FOREACH_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.LISTS_SET_INDEX_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.CONTROLS_FOR_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.LISTS_CREATE_WITH_ITEM_TITLE = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.TEXT_APPEND_VARIABLE = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.TEXT_CREATE_JOIN_ITEM_TITLE_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.LISTS_INDEX_OF_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.PROCEDURES_DEFRETURN_COMMENT = Blockly.Msg.P




Blockly.Msg.ADD_COMMENT = "添加註釋";
Blockly.Msg.AIYBOARD_AIY_BOARD = "AIY Board"; // untranslated
Blockly.Msg.AIYBOARD_BUTTON_FROM = "from"; // untranslated
Blockly.Msg.AIYBOARD_BUTTON_WHEN = "when button"; // untranslated
Blockly.Msg.AIYBOARD_FROM = "from aiy.board"; // untranslated
Blockly.Msg.AIYBOARD_IMPORT = "import"; // untranslated
Blockly.Msg.AIYBOARD_LED_STATE = "get LED state of"; // untranslated
Blockly.Msg.AIYBOARD_LED_STATUS = "get LED status of"; // untranslated
Blockly.Msg.CAMERA_CAMERA = "camera"; // untranslated
Blockly.Msg.CAMERA_DO = "Do"; // untranslated
Blockly.Msg.CAMERA_FPS = "fps"; // untranslated
Blockly.Msg.CAMERA_FRAME_RATE = "Frame Rete:"; // untranslated
Blockly.Msg.CAMERA_IMPORT = "import piCamera"; // untranslated
Blockly.Msg.CAMERA_RESOLUTION = "Resolution"; // untranslated
Blockly.Msg.CAMERA_SENSOR_MODE = "Sensor Mode:"; // untranslated
Blockly.Msg.CAMERA_SET_BOUNDING = "Set bounding box:"; // untranslated
Blockly.Msg.CAMERA_USE_AS = "Use PiCamera as"; // untranslated
Blockly.Msg.CHANGE_VALUE_TITLE = "更改值：";
Blockly.Msg.CLEAN_UP = "整理塊";
Blockly.Msg.COLLAPSE_ALL = "折疊塊";
Blockly.Msg.COLLAPSE_BLOCK = "折疊塊";
Blockly.Msg.COLOUR_BLEND_COLOUR1 = "顏色1";
Blockly.Msg.COLOUR_BLEND_COLOUR2 = "顏色2";
Blockly.Msg.COLOUR_BLEND_HELPURL = "http://meyerweb.com/eric/tools/color-blend/"; // untranslated
Blockly.Msg.COLOUR_BLEND_RATIO = "比例";
Blockly.Msg.COLOUR_BLEND_TITLE = "混合";
Blockly.Msg.COLOUR_BLEND_TOOLTIP = "用一個給定的比率(0.0-1.0)混合兩種顏色。";
Blockly.Msg.COLOUR_PICKER_HELPURL = "https://zh.wikipedia.org/wiki/顏色";
Blockly.Msg.COLOUR_PICKER_TOOLTIP = "從調色板中選擇壹種顏色。";
Blockly.Msg.COLOUR_RANDOM_HELPURL = "http://randomcolour.com"; // untranslated
Blockly.Msg.COLOUR_RANDOM_TITLE = "隨機顏色";
Blockly.Msg.COLOUR_RANDOM_TOOLTIP = "隨機選擇壹種顏色。";
Blockly.Msg.COLOUR_RGB_BLUE = "藍色";
Blockly.Msg.COLOUR_RGB_GREEN = "綠色";
Blockly.Msg.COLOUR_RGB_HELPURL = "http://www.december.com/html/spec/colorper.html"; // untranslated
Blockly.Msg.COLOUR_RGB_RED = "紅色";
Blockly.Msg.COLOUR_RGB_TITLE = "顏色";
Blockly.Msg.COLOUR_RGB_TOOLTIP = "通過指定紅色、綠色和藍色的量創建壹種顏色。所有的值必須介於0和100之間。";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_HELPURL = "https://github.com/google/blockly/wiki/Loops#loop-termination-blocks"; // untranslated
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_OPERATOR_BREAK = "中斷循環";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_OPERATOR_CONTINUE = "繼續下壹次循環";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_TOOLTIP_BREAK = "中斷包含它的循環。";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_TOOLTIP_CONTINUE = "跳過這個循環的剩余部分，並繼續下壹次疊代。";
Blockly.Msg.CONTROLS_FLOW_STATEMENTS_WARNING = "警告：此塊僅可用於在一個循環內。";
Blockly.Msg.CONTROLS_FOREACH_HELPURL = "https://github.com/google/blockly/wiki/Loops#for-each"; // untranslated
Blockly.Msg.CONTROLS_FOREACH_TITLE = "在陣列 %2 中以 %1 遍歷每個項目";
Blockly.Msg.CONTROLS_FOREACH_TOOLTIP = "遍歷每個陣列中的項目，將變數\" %1\"設定到該項中，然後執行某些語句。";
Blockly.Msg.CONTROLS_FOR_HELPURL = "https://github.com/google/blockly/wiki/Loops#count-with"; // untranslated
Blockly.Msg.CONTROLS_FOR_TITLE = "使用 %1 從範圍 %2 到 %3 每隔 %4";
Blockly.Msg.CONTROLS_FOR_TOOLTIP = "從起始數到結尾數中取出變數\" %1\"的值，按指定的時間間隔，執行指定的塊。";
Blockly.Msg.CONTROLS_IF_ELSEIF_TOOLTIP = "在if語句塊中增加一個條件。";
Blockly.Msg.CONTROLS_IF_ELSE_TOOLTIP = "添加一個最終的，包括所有情況的節到if塊中。";
Blockly.Msg.CONTROLS_IF_HELPURL = "https://github.com/google/blockly/wiki/IfElse"; // untranslated
Blockly.Msg.CONTROLS_IF_IF_TOOLTIP = "增加、刪除或重新排列各節來重新配置\"if\"塊。";
Blockly.Msg.CONTROLS_IF_MSG_ELSE = "否則";
Blockly.Msg.CONTROLS_IF_MSG_ELSEIF = "否則如果";
Blockly.Msg.CONTROLS_IF_MSG_IF = "如果";
Blockly.Msg.CONTROLS_IF_TOOLTIP_1 = "如果值為真，執行壹些語句。";
Blockly.Msg.CONTROLS_IF_TOOLTIP_2 = "如果值為真，則執行首個塊語句。否則，則執行第二塊語句。";
Blockly.Msg.CONTROLS_IF_TOOLTIP_3 = "如果首個值為真，則執行首個塊的語句。否則，如果第二個值為真，則執行第二塊的語句。";
Blockly.Msg.CONTROLS_IF_TOOLTIP_4 = "如果首個值為真，則執行首個塊對語句。否則，如果第二個值為真，則執行語句的第二塊。如果沒有值為真，則執行最後壹塊的語句。";
Blockly.Msg.CONTROLS_REPEAT_HELPURL = "https://zh.wikipedia.org/wiki/For循環";
Blockly.Msg.CONTROLS_REPEAT_INPUT_DO = "執行";
Blockly.Msg.CONTROLS_REPEAT_TITLE = "重複 %1 次";
Blockly.Msg.CONTROLS_REPEAT_TOOLTIP = "多次執行壹些語句。";
Blockly.Msg.CONTROLS_WHILEUNTIL_HELPURL = "https://github.com/google/blockly/wiki/Loops#repeat"; // untranslated
Blockly.Msg.CONTROLS_WHILEUNTIL_OPERATOR_UNTIL = "重複直到";
Blockly.Msg.CONTROLS_WHILEUNTIL_OPERATOR_WHILE = "重複當";
Blockly.Msg.CONTROLS_WHILEUNTIL_TOOLTIP_UNTIL = "只要值為假，執行壹些語句。";
Blockly.Msg.CONTROLS_WHILEUNTIL_TOOLTIP_WHILE = "只要值為真，執行壹些語句。";
Blockly.Msg.DELETE_ALL_BLOCKS = "刪除所有%1塊嗎？";
Blockly.Msg.DELETE_BLOCK = "刪除塊";
Blockly.Msg.DELETE_VARIABLE = "刪除\" %1\"變數";
Blockly.Msg.DELETE_VARIABLE_CONFIRMATION = "刪除\" % 2\"變數的%1種用途麼？";
Blockly.Msg.DELETE_X_BLOCKS = "刪除 %1 塊";
Blockly.Msg.DICTS_CREATE_EMPTY_TITLE = "empty dictionary"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_CONTAINER_TITLE_ADD = "Create Dictionary"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_CONTAINER_TOOLTIP = ""; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_INPUT_WITH = "create dict with"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_KEY = "key"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_MAPPING = ":"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_TITLE = "key/value"; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_ITEM_TOOLTIP = ""; // untranslated
Blockly.Msg.DICTS_CREATE_WITH_TOOLTIP = ""; // untranslated
Blockly.Msg.DICT_GET = "get key"; // untranslated
Blockly.Msg.DICT_GET_TO = "of"; // untranslated
// Blockly.Msg.DICT_KEYS = "get all keys from"; // untranslated
Blockly.Msg.DISABLE_BLOCK = "禁用塊";
Blockly.Msg.DUPLICATE_BLOCK = "復制";
Blockly.Msg.ENABLE_BLOCK = "啟用塊";
Blockly.Msg.EXPAND_ALL = "展開塊";
Blockly.Msg.EXPAND_BLOCK = "展開塊";
Blockly.Msg.EXTERNAL_INPUTS = "外部輸入";
Blockly.Msg.HELP = "幫助";
Blockly.Msg.INLINE_INPUTS = "單行輸入";
Blockly.Msg.LISTS_APPEND = "append item"; // untranslated
Blockly.Msg.LISTS_APPEND_HELPURL = "http://google.com"; // untranslated
Blockly.Msg.LISTS_APPEND_TO = "to list"; // untranslated
Blockly.Msg.LISTS_APPEND_TOOLTIP = "Append an element to a list"; // untranslated
Blockly.Msg.LISTS_CREATE_EMPTY_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-empty-list";
Blockly.Msg.LISTS_CREATE_EMPTY_TITLE = "創建空陣列";
Blockly.Msg.LISTS_CREATE_EMPTY_TOOLTIP = "返回一個陣列，長度為 0，不包含任何數據記錄";
Blockly.Msg.LISTS_CREATE_WITH_CONTAINER_TITLE_ADD = "陣列";
Blockly.Msg.LISTS_CREATE_WITH_CONTAINER_TOOLTIP = "增加、刪除或重新排列各部分以此重新配置這個陣列塊。";
Blockly.Msg.LISTS_CREATE_WITH_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-list-with";
Blockly.Msg.LISTS_CREATE_WITH_INPUT_WITH = "使用這些值建立陣列";
Blockly.Msg.LISTS_CREATE_WITH_ITEM_TOOLTIP = "將一個項添加到陣列中。";
Blockly.Msg.LISTS_CREATE_WITH_TOOLTIP = "建立一個具有任意數量項目的陣列。";
Blockly.Msg.LISTS_GET_INDEX_FIRST = "首個";
Blockly.Msg.LISTS_GET_INDEX_FROM_END = "倒數第#";
Blockly.Msg.LISTS_GET_INDEX_FROM_START = "#";
Blockly.Msg.LISTS_GET_INDEX_GET = "獲得";
Blockly.Msg.LISTS_GET_INDEX_GET_REMOVE = "取出並移除";
Blockly.Msg.LISTS_GET_INDEX_LAST = "最後";
Blockly.Msg.LISTS_GET_INDEX_RANDOM = "隨機";
Blockly.Msg.LISTS_GET_INDEX_REMOVE = "移除";
Blockly.Msg.LISTS_GET_INDEX_TAIL = "空白";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_FIRST = "返回陣列中的首個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_FROM = "返回在陣列中的指定位置的項。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_LAST = "返回陣列中的最後壹項。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_RANDOM = "隨機返回陣列中的一個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FIRST = "移除並返回陣列中的首個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FROM = "移除並返回陣列中的指定位置的項。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_LAST = "移除並返回陣列中的最後一個項目。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_RANDOM = "移除並返回陣列中的一個隨機項目中。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_FIRST = "移除陣列中的首個項";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_FROM = "移除在陣列中的指定位置的項。";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_LAST = "移除陣列中的最後壹項";
Blockly.Msg.LISTS_GET_INDEX_TOOLTIP_REMOVE_RANDOM = "刪除陣列中的一個隨機的項。";
Blockly.Msg.LISTS_GET_SUBLIST_END_FROM_END = "到倒數第#";
Blockly.Msg.LISTS_GET_SUBLIST_END_FROM_START = "到#";
Blockly.Msg.LISTS_GET_SUBLIST_END_LAST = "到最後";
Blockly.Msg.LISTS_GET_SUBLIST_HELPURL = "https://github.com/google/blockly/wiki/Lists#getting-a-sublist"; // untranslated
Blockly.Msg.LISTS_GET_SUBLIST_START_FIRST = "從頭獲得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_START_FROM_END = "從倒數#取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_START_FROM_START = "從#取得子陣列";
Blockly.Msg.LISTS_GET_SUBLIST_TAIL = "空白";
Blockly.Msg.LISTS_GET_SUBLIST_TOOLTIP = "復制陣列中指定的部分。";
Blockly.Msg.LISTS_INDEX_FROM_END_TOOLTIP = "%1是最後壹項。";
Blockly.Msg.LISTS_INDEX_FROM_START_TOOLTIP = "%1是首個項目。";
Blockly.Msg.LISTS_INDEX_OF_FIRST = "找出首個項出現";
Blockly.Msg.LISTS_INDEX_OF_HELPURL = "https://github.com/google/blockly/wiki/Lists#getting-items-from-a-list"; // untranslated
Blockly.Msg.LISTS_INDEX_OF_LAST = "找出最後一個項出現";
Blockly.Msg.LISTS_INDEX_OF_TOOLTIP = "返回在陣列中的首個/最後一個匹配項的索引值。如果找不到項目則返回%1。";
Blockly.Msg.LISTS_INLIST = "在陣列中";
Blockly.Msg.LISTS_ISEMPTY_HELPURL = "https://github.com/google/blockly/wiki/Lists#is-empty"; // untranslated
Blockly.Msg.LISTS_ISEMPTY_TITLE = "%1是空的";
Blockly.Msg.LISTS_ISEMPTY_TOOLTIP = "如果改陣列為空，則返回真。";
Blockly.Msg.LISTS_LENGTH_HELPURL = "https://github.com/google/blockly/wiki/Lists#length-of"; // untranslated
Blockly.Msg.LISTS_LENGTH_TITLE = "%1的長度";
Blockly.Msg.LISTS_LENGTH_TOOLTIP = "返回陣列的長度。";
Blockly.Msg.LISTS_REPEAT_HELPURL = "https://github.com/google/blockly/wiki/Lists#create-list-with"; // untranslated
Blockly.Msg.LISTS_REPEAT_TITLE = "建立陣列使用項 %1 重複 %2 次";
Blockly.Msg.LISTS_REPEAT_TOOLTIP = "建立包含指定重複次數的值的陣列。";
Blockly.Msg.LISTS_SET_INDEX_HELPURL = "https://github.com/google/blockly/wiki/Lists#in-list--set"; // untranslated
Blockly.Msg.LISTS_SET_INDEX_INPUT_TO = "為";
Blockly.Msg.LISTS_SET_INDEX_INSERT = "插入在";
Blockly.Msg.LISTS_SET_INDEX_SET = "設定";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_FIRST = "在陣列的起始處添加該項。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_FROM = "插入在陣列中指定位置的項。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_LAST = "將該項追加到陣列的末尾。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_INSERT_RANDOM = "在陣列中隨機插入項。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_FIRST = "設定陣列中的首個項目。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_FROM = "設定在陣列中指定位置的項。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_LAST = "設定陣列中的最後壹項。";
Blockly.Msg.LISTS_SET_INDEX_TOOLTIP_SET_RANDOM = "設定陣列中一個隨機的項目。";
Blockly.Msg.LISTS_SORT_HELPURL = "https://github.com/google/blockly/wiki/Lists#sorting-a-list";
Blockly.Msg.LISTS_SORT_ORDER_ASCENDING = "升序";
Blockly.Msg.LISTS_SORT_ORDER_DESCENDING = "降序";
Blockly.Msg.LISTS_SORT_TITLE = "排序%1 %2 %3";
Blockly.Msg.LISTS_SORT_TOOLTIP = "排序一個陣列的拷貝。";
Blockly.Msg.LISTS_SORT_TYPE_IGNORECASE = "按字母排序，忽略大小寫";
Blockly.Msg.LISTS_SORT_TYPE_NUMERIC = "按數字排序";
Blockly.Msg.LISTS_SORT_TYPE_TEXT = "按字母排序";
Blockly.Msg.LISTS_SPLIT_HELPURL = "https://github.com/google/blockly/wiki/Lists#splitting-strings-and-joining-lists";
Blockly.Msg.LISTS_SPLIT_LIST_FROM_TEXT = "從文本制作陣列";
Blockly.Msg.LISTS_SPLIT_TEXT_FROM_LIST = "從陣列拆出文本";
Blockly.Msg.LISTS_SPLIT_TOOLTIP_JOIN = "加入文本陣列至一個文本，由分隔符分隔。";
Blockly.Msg.LISTS_SPLIT_TOOLTIP_SPLIT = "拆分文本到文本陣列，按每個分隔符拆分。";
Blockly.Msg.LISTS_SPLIT_WITH_DELIMITER = "用分隔符";
Blockly.Msg.LOGGING_CONF = "Logging Basic config"; // untranslated
Blockly.Msg.LOGGING_CONFIG = "logging config"; // untranslated
Blockly.Msg.LOGGING_CONFIG_LEVEL = "level ="; // untranslated
Blockly.Msg.LOGGING_IMPORT = "import logging"; // untranslated
Blockly.Msg.LOGGING_INFO = "Logging info"; // untranslated
Blockly.Msg.LOGGING_SETUP = "Logging Setup"; // untranslated
Blockly.Msg.LOGIC_BOOLEAN_FALSE = "假";
Blockly.Msg.LOGIC_BOOLEAN_HELPURL = "https://github.com/google/blockly/wiki/Logic#values"; // untranslated
Blockly.Msg.LOGIC_BOOLEAN_TOOLTIP = "返回真或假。";
Blockly.Msg.LOGIC_BOOLEAN_TRUE = "真";
Blockly.Msg.LOGIC_COMPARE_HELPURL = "https://zh.wikipedia.org/wiki/不等";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_EQ = "如果兩個輸入結果相等，則返回真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_GT = "如果首個輸入結果比第二個大，則返回真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_GTE = "如果首個輸入結果大於或等於第二個輸入結果，則返回真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_LT = "如果首個輸入結果比第二個小，則返回真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_LTE = "如果首個輸入結果小於或等於第二個輸入結果，則返回真。";
Blockly.Msg.LOGIC_COMPARE_TOOLTIP_NEQ = "如果兩個輸入結果不相等，則返回真。";
Blockly.Msg.LOGIC_NEGATE_HELPURL = "https://github.com/google/blockly/wiki/Logic#not";
Blockly.Msg.LOGIC_NEGATE_TITLE = "非%1";
Blockly.Msg.LOGIC_NEGATE_TOOLTIP = "如果輸入結果為假，則返回真;如果輸入結果為真，則返回假。";
Blockly.Msg.LOGIC_NULL = "空";
Blockly.Msg.LOGIC_NULL_HELPURL = "https://en.wikipedia.org/wiki/Nullable_type"; // untranslated
Blockly.Msg.LOGIC_NULL_TOOLTIP = "返回空值。";
Blockly.Msg.LOGIC_OPERATION_AND = "和";
Blockly.Msg.LOGIC_OPERATION_HELPURL = "https://github.com/google/blockly/wiki/Logic#logical-operations"; // untranslated
Blockly.Msg.LOGIC_OPERATION_OR = "或";
Blockly.Msg.LOGIC_OPERATION_TOOLTIP_AND = "如果兩個輸入結果都為真，則返回真。";
Blockly.Msg.LOGIC_OPERATION_TOOLTIP_OR = "如果至少有一個輸入結果為真，則返回真。";
Blockly.Msg.LOGIC_TERNARY_CONDITION = "測試";
Blockly.Msg.LOGIC_TERNARY_HELPURL = "https://zh.wikipedia.org/wiki/條件運算符";
Blockly.Msg.LOGIC_TERNARY_IF_FALSE = "如果為假";
Blockly.Msg.LOGIC_TERNARY_IF_TRUE = "如果為真";
Blockly.Msg.LOGIC_TERNARY_TOOLTIP = "檢查\"test\"中的條件。如果條件為真，則返回\"if true\"的值，否則，則返回\"if false\"的值。";
Blockly.Msg.LOOP_FOREACH_ITEM = "for each item"; // untranslated
Blockly.Msg.LOOP_FOREACH_LIST = "in list"; // untranslated
Blockly.Msg.MATH_ADDITION_SYMBOL = "+"; // untranslated
Blockly.Msg.MATH_ARITHMETIC_HELPURL = "https://zh.wikipedia.org/wiki/算術";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_ADD = "返回兩個數字的和。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_DIVIDE = "返回兩個數字的商。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_MINUS = "返回兩個數字的區別。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_MULTIPLY = "返回兩個數字的乘積。";
Blockly.Msg.MATH_ARITHMETIC_TOOLTIP_POWER = "返回首個數的第二個數次冪。";
Blockly.Msg.MATH_CHANGE_HELPURL = "https://zh.wikipedia.org/wiki/加法";
Blockly.Msg.MATH_CHANGE_TITLE = "更改 %1 由 %2";
Blockly.Msg.MATH_CHANGE_TOOLTIP = "將一個數添加到變數\" %1\"。";
Blockly.Msg.MATH_CONSTANT_HELPURL = "https://zh.wikipedia.org/wiki/數學常數";
Blockly.Msg.MATH_CONSTANT_TOOLTIP = "返回一個常見常量：π (3.141......)，e (2.718...)、φ (1.618...)、 sqrt(2) (1.414......)、sqrt(½) (0.707......)或 ∞（無窮大）。";
Blockly.Msg.MATH_CONSTRAIN_HELPURL = "https://en.wikipedia.org/wiki/Clamping_%28graphics%29"; // untranslated
Blockly.Msg.MATH_CONSTRAIN_TITLE = "限制數字 %1 介於 (低) %2 到 (高) %3";
Blockly.Msg.MATH_CONSTRAIN_TOOLTIP = "限制數字介於兩個指定的數字之間";
Blockly.Msg.MATH_DIVISION_SYMBOL = "÷"; // untranslated
Blockly.Msg.MATH_IS_DIVISIBLE_BY = "可被整除";
Blockly.Msg.MATH_IS_EVEN = "是偶數";
Blockly.Msg.MATH_IS_NEGATIVE = "為負";
Blockly.Msg.MATH_IS_ODD = "是奇數";
Blockly.Msg.MATH_IS_POSITIVE = "為正";
Blockly.Msg.MATH_IS_PRIME = "是質數";
Blockly.Msg.MATH_IS_TOOLTIP = "如果數字是偶數、奇數、非負整數、正數、負數或如果它可被某數字整除，則返回真或假。";
Blockly.Msg.MATH_IS_WHOLE = "為整數";
Blockly.Msg.MATH_MODULO_HELPURL = "https://zh.wikipedia.org/wiki/模除";
Blockly.Msg.MATH_MODULO_TITLE = "取餘數自 %1 ÷ %2";
Blockly.Msg.MATH_MODULO_TOOLTIP = "返回這兩個數字相除後的餘數。";
Blockly.Msg.MATH_MULTIPLICATION_SYMBOL = "×"; // untranslated
Blockly.Msg.MATH_NUMBER_HELPURL = "https://zh.wikipedia.org/wiki/數";
Blockly.Msg.MATH_NUMBER_TOOLTIP = "一個數字。";
Blockly.Msg.MATH_ONLIST_HELPURL = ""; // untranslated
Blockly.Msg.MATH_ONLIST_OPERATOR_AVERAGE = "陣列中的平均數";
Blockly.Msg.MATH_ONLIST_OPERATOR_MAX = "陣列中的最大值";
Blockly.Msg.MATH_ONLIST_OPERATOR_MEDIAN = "陣列中位數";
Blockly.Msg.MATH_ONLIST_OPERATOR_MIN = "陣列中的最小值";
Blockly.Msg.MATH_ONLIST_OPERATOR_MODE = "陣列模式";
Blockly.Msg.MATH_ONLIST_OPERATOR_RANDOM = "陣列的隨機項";
Blockly.Msg.MATH_ONLIST_OPERATOR_STD_DEV = "陣列中的標準差";
Blockly.Msg.MATH_ONLIST_OPERATOR_SUM = "陣列中的數的總和";
Blockly.Msg.MATH_ONLIST_TOOLTIP_AVERAGE = "返回陣列中的數值的平均值。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MAX = "返回陣列中最大數。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MEDIAN = "返回陣列中的中位數。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MIN = "返回陣列中最小數。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_MODE = "返回陣列中的最常見的項的陣列。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_RANDOM = "從陣列中返回一個隨機的元素。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_STD_DEV = "返回陣列的標準偏差。";
Blockly.Msg.MATH_ONLIST_TOOLTIP_SUM = "返回陣列中的所有數字的和。";
Blockly.Msg.MATH_POWER_SYMBOL = "^"; // untranslated
Blockly.Msg.MATH_RANDOM_FLOAT_HELPURL = "https://zh.wikipedia.org/wiki/隨機數生成器";
Blockly.Msg.MATH_RANDOM_FLOAT_TITLE_RANDOM = "隨機分數";
Blockly.Msg.MATH_RANDOM_FLOAT_TOOLTIP = "返回介於（包含）0.0到1.0之間的隨機數。";
Blockly.Msg.MATH_RANDOM_INT_HELPURL = "https://zh.wikipedia.org/wiki/隨機數生成器";
Blockly.Msg.MATH_RANDOM_INT_TITLE = "從 %1 到 %2 之間的隨機整數";
Blockly.Msg.MATH_RANDOM_INT_TOOLTIP = "返回兩個指定的範圍（含）之間的隨機整數。";
Blockly.Msg.MATH_ROUND_HELPURL = "https://zh.wikipedia.org/wiki/數值修約";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUND = "向下舍入";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUNDDOWN = "向下舍入";
Blockly.Msg.MATH_ROUND_OPERATOR_ROUNDUP = "向上舍入";
Blockly.Msg.MATH_ROUND_TOOLTIP = "數字向上或向下舍入。";
Blockly.Msg.MATH_SINGLE_HELPURL = "https://zh.wikipedia.org/wiki/平方根";
Blockly.Msg.MATH_SINGLE_OP_ABSOLUTE = "絕對";
Blockly.Msg.MATH_SINGLE_OP_ROOT = "平方根";
Blockly.Msg.MATH_SINGLE_TOOLTIP_ABS = "返回一個數的絕對值。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_EXP = "返回數的e次冪。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_LN = "返回一個數的自然對數。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_LOG10 = "返回數字的對數。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_NEG = "返回數的邏輯非。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_POW10 = "返回數的10次冪。";
Blockly.Msg.MATH_SINGLE_TOOLTIP_ROOT = "返回數的平方根。";
Blockly.Msg.MATH_SUBTRACTION_SYMBOL = "-"; // untranslated
Blockly.Msg.MATH_SUM = "Sum"; // untranslated
Blockly.Msg.MATH_TRIG_ACOS = "acos"; // untranslated
Blockly.Msg.MATH_TRIG_ASIN = "asin"; // untranslated
Blockly.Msg.MATH_TRIG_ATAN = "atan"; // untranslated
Blockly.Msg.MATH_TRIG_COS = "cos"; // untranslated
Blockly.Msg.MATH_TRIG_HELPURL = "https://zh.wikipedia.org/wiki/三角函數";
Blockly.Msg.MATH_TRIG_SIN = "sin"; // untranslated
Blockly.Msg.MATH_TRIG_TAN = "tan"; // untranslated
Blockly.Msg.MATH_TRIG_TOOLTIP_ACOS = "返回一個數的反余弦值。";
Blockly.Msg.MATH_TRIG_TOOLTIP_ASIN = "返回一個數的反正弦值。";
Blockly.Msg.MATH_TRIG_TOOLTIP_ATAN = "返回指定角度的反正切值。";
Blockly.Msg.MATH_TRIG_TOOLTIP_COS = "返回指定角度的余弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_SIN = "返回指定角度的正弦值(非弧度）。";
Blockly.Msg.MATH_TRIG_TOOLTIP_TAN = "返回指定角度的正切值(非弧度）。";
Blockly.Msg.NEW_VARIABLE = "創建變數...";
Blockly.Msg.NEW_VARIABLE_TITLE = "新變數的名稱：";
Blockly.Msg.ORDINAL_NUMBER_SUFFIX = "空白";
Blockly.Msg.PLATFORM_IMPORT = "import platform"; // untranslated
Blockly.Msg.PROCEDURES_ALLOW_STATEMENTS = "允許聲明";
Blockly.Msg.PROCEDURES_BEFORE_PARAMS = "與：";
Blockly.Msg.PROCEDURES_CALLNORETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg.PROCEDURES_CALLNORETURN_TOOLTIP = "運行用戶定義的函數\" %1\"。";
Blockly.Msg.PROCEDURES_CALLRETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg.PROCEDURES_CALLRETURN_TOOLTIP = "運行用戶定義的函數\" %1\"，並使用它的輸出值。";
Blockly.Msg.PROCEDURES_CALL_BEFORE_PARAMS = "與：";
Blockly.Msg.PROCEDURES_CREATE_DO = "創建\" %1\"";
Blockly.Msg.PROCEDURES_DEFNORETURN_COMMENT = "描述該功能...";
Blockly.Msg.PROCEDURES_DEFNORETURN_DO = "執行";
Blockly.Msg.PROCEDURES_DEFNORETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg.PROCEDURES_DEFNORETURN_PROCEDURE = "做點什麼";
Blockly.Msg.PROCEDURES_DEFNORETURN_TITLE = "定義";
Blockly.Msg.PROCEDURES_DEFNORETURN_TOOLTIP = "創建一個不帶輸出值的函數。";
Blockly.Msg.PROCEDURES_DEFRETURN_HELPURL = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg.PROCEDURES_DEFRETURN_RETURN = "返回";
Blockly.Msg.PROCEDURES_DEFRETURN_TOOLTIP = "創建一個有輸出值的函數。";
Blockly.Msg.PROCEDURES_DEF_DUPLICATE_WARNING = "警告: 此函數具有重複參數。";
Blockly.Msg.PROCEDURES_HIGHLIGHT_DEF = "突出顯示函數定義";
Blockly.Msg.PROCEDURES_IFRETURN_HELPURL = "http://c2.com/cgi/wiki?GuardClause";
Blockly.Msg.PROCEDURES_IFRETURN_TOOLTIP = "如果值為真，則返回第二個值。";
Blockly.Msg.PROCEDURES_IFRETURN_WARNING = "警告: 僅在定義函數內可使用此塊。";
Blockly.Msg.PROCEDURES_MAINFUNCTION = "Define Main function"; // untranslated
Blockly.Msg.PROCEDURES_MUTATORARG_TITLE = "輸入名稱：";
Blockly.Msg.PROCEDURES_MUTATORARG_TOOLTIP = "添加函數輸入。";
Blockly.Msg.PROCEDURES_MUTATORCONTAINER_TITLE = "輸入";
Blockly.Msg.PROCEDURES_MUTATORCONTAINER_TOOLTIP = "添加、刪除或重新排此函數的輸入。";
Blockly.Msg.REDO = "重做";
Blockly.Msg.REMOVE_COMMENT = "刪除註釋";
Blockly.Msg.RENAME_VARIABLE = "重命名變數...";
Blockly.Msg.RENAME_VARIABLE_TITLE = "將所有\" %1\"變數重命名為:";
Blockly.Msg.REQUEST_DATA = "data"; // untranslated
Blockly.Msg.REQUEST_IMPORT = "import requests"; // untranslated
Blockly.Msg.REQUEST_POST_DATATYPE = "Request Post Data: JSON"; // untranslated
Blockly.Msg.REQUEST_SET_URL = "Set URL:"; // untranslated
Blockly.Msg.SYSTEM_EXIT = "Sys.exit"; // untranslated
Blockly.Msg.SYSTEM_IMPORT = "import sys"; // untranslated
Blockly.Msg.TEXT_APPEND_APPENDTEXT = "追加文本";
Blockly.Msg.TEXT_APPEND_HELPURL = "https://github.com/google/blockly/wiki/Text#text-modification"; // untranslated
Blockly.Msg.TEXT_APPEND_TO = "在";
Blockly.Msg.TEXT_APPEND_TOOLTIP = "將壹些文本追加到變數\" %1\"。";
Blockly.Msg.TEXT_CHANGECASE_HELPURL = "https://github.com/google/blockly/wiki/Text#adjusting-text-case"; // untranslated
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_LOWERCASE = "為小寫";
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_TITLECASE = "為首字母大寫";
Blockly.Msg.TEXT_CHANGECASE_OPERATOR_UPPERCASE = "為大寫";
Blockly.Msg.TEXT_CHANGECASE_TOOLTIP = "使用不同的大小寫復制這段字串。";
Blockly.Msg.TEXT_CHARAT_FIRST = "獲得首個字符";
Blockly.Msg.TEXT_CHARAT_FROM_END = "獲得倒數第#個字符";
Blockly.Msg.TEXT_CHARAT_FROM_START = "獲得字符#";
Blockly.Msg.TEXT_CHARAT_HELPURL = "https://github.com/google/blockly/wiki/Text#extracting-text"; // untranslated
Blockly.Msg.TEXT_CHARAT_INPUT_INTEXT = "於文本中";
Blockly.Msg.TEXT_CHARAT_LAST = "獲得最後一個字符";
Blockly.Msg.TEXT_CHARAT_RANDOM = "獲取隨機的字母";
Blockly.Msg.TEXT_CHARAT_TAIL = "";
Blockly.Msg.TEXT_CHARAT_TOOLTIP = "返回位於指定位置的字母。";
Blockly.Msg.TEXT_CREATE_JOIN_ITEM_TOOLTIP = "將一個項添加到文本中。";
Blockly.Msg.TEXT_CREATE_JOIN_TITLE_JOIN = "加入";
Blockly.Msg.TEXT_CREATE_JOIN_TOOLTIP = "添加、移除或重新排列各節來重新配置這個文本塊。";
Blockly.Msg.TEXT_GET_SUBSTRING_END_FROM_END = "到倒數第#個字符";
Blockly.Msg.TEXT_GET_SUBSTRING_END_FROM_START = "到字符#";
Blockly.Msg.TEXT_GET_SUBSTRING_END_LAST = "到最後一個字符";
Blockly.Msg.TEXT_GET_SUBSTRING_HELPURL = "https://github.com/google/blockly/wiki/Text#extracting-a-region-of-text"; // untranslated
Blockly.Msg.TEXT_GET_SUBSTRING_INPUT_IN_TEXT = "自文本";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FIRST = "取得段落字串自首個字符";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FROM_END = "取得段落字串自倒數第#個字符";
Blockly.Msg.TEXT_GET_SUBSTRING_START_FROM_START = "取得段落字串自#";
Blockly.Msg.TEXT_GET_SUBSTRING_TAIL = "";
Blockly.Msg.TEXT_GET_SUBSTRING_TOOLTIP = "返回指定的部分文本。";
Blockly.Msg.TEXT_INDEXOF_HELPURL = "https://github.com/google/blockly/wiki/Text#finding-text"; // untranslated
Blockly.Msg.TEXT_INDEXOF_INPUT_INTEXT = "自文本";
Blockly.Msg.TEXT_INDEXOF_OPERATOR_FIRST = "尋找首個出現的文本";
Blockly.Msg.TEXT_INDEXOF_OPERATOR_LAST = "尋找最後一個出現的文本";
Blockly.Msg.TEXT_INDEXOF_TAIL = "空白";
Blockly.Msg.TEXT_INDEXOF_TOOLTIP = "返回在第二個字串中的首個/最後一個匹配項的索引值。如果未找到則返回%1。";
Blockly.Msg.TEXT_ISEMPTY_HELPURL = "https://github.com/google/blockly/wiki/Text#checking-for-empty-text"; // untranslated
Blockly.Msg.TEXT_ISEMPTY_TITLE = "%1是空的";
Blockly.Msg.TEXT_ISEMPTY_TOOLTIP = "如果提供的文本為空，則返回真。";
Blockly.Msg.TEXT_JOIN_HELPURL = "https://github.com/google/blockly/wiki/Text#text-creation"; // untranslated
Blockly.Msg.TEXT_JOIN_TITLE_CREATEWITH = "建立字串使用";
Blockly.Msg.TEXT_JOIN_TOOLTIP = "通過串起任意數量的項以建立壹段字串。";
Blockly.Msg.TEXT_LENGTH_HELPURL = "https://github.com/google/blockly/wiki/Text#text-modification"; // untranslated
Blockly.Msg.TEXT_LENGTH_TITLE = "%1的長度";
Blockly.Msg.TEXT_LENGTH_TOOLTIP = "返回提供文本的字母數（包括空格）。";
Blockly.Msg.TEXT_LOWER = "set lower case"; // untranslated
Blockly.Msg.TEXT_PRINT_HELPURL = "https://github.com/google/blockly/wiki/Text#printing-text"; // untranslated
Blockly.Msg.TEXT_PRINT_TITLE = "打印%1";
Blockly.Msg.TEXT_PRINT_TITLE_PRINT = "print"; // untranslated
Blockly.Msg.TEXT_PRINT_TOOLTIP = "打印指定的字串、數字或其他值。";
Blockly.Msg.TEXT_PROMPT_HELPURL = "https://github.com/google/blockly/wiki/Text#getting-input-from-the-user"; // untranslated
Blockly.Msg.TEXT_PROMPT_TOOLTIP_NUMBER = "提示用戶輸入數字。";
Blockly.Msg.TEXT_PROMPT_TOOLTIP_TEXT = "提示用戶輸入壹些文本。";
Blockly.Msg.TEXT_PROMPT_TYPE_NUMBER = "輸入數字並顯示提示消息";
Blockly.Msg.TEXT_PROMPT_TYPE_TEXT = "輸入數字並顯示提示消息";
Blockly.Msg.TEXT_TEXT_HELPURL = "https://zh.wikipedia.org/wiki/字串";
Blockly.Msg.TEXT_TEXT_TOOLTIP = "一個字母、單詞或壹行文本。";
Blockly.Msg.TEXT_TRIM_HELPURL = "https://github.com/google/blockly/wiki/Text#trimming-removing-spaces"; // untranslated
Blockly.Msg.TEXT_TRIM_OPERATOR_BOTH = "消除兩側空格";
Blockly.Msg.TEXT_TRIM_OPERATOR_LEFT = "消除左側空格";
Blockly.Msg.TEXT_TRIM_OPERATOR_RIGHT = "消除右側空格";
Blockly.Msg.TEXT_TRIM_TOOLTIP = "復制這段字串的同時刪除兩端多余的空格。";
Blockly.Msg.THREAD_IMPORT = "import threading"; // untranslated
Blockly.Msg.THREAD_SET_TARGET = "threading set target"; // untranslated
Blockly.Msg.THREAD_START = "start"; // untranslated
Blockly.Msg.THREAD_THREADING = "threading"; // untranslated
Blockly.Msg.TODAY = "今天";
Blockly.Msg.TYPE_CHECK = "type of"; // untranslated
Blockly.Msg.UNDO = "撤銷";
Blockly.Msg.VARIABLES_DEFAULT_NAME = "項目";
Blockly.Msg.VARIABLES_GET_CREATE_SET = "創建\"設定 %1\"";
Blockly.Msg.VARIABLES_GET_HELPURL = "https://github.com/google/blockly/wiki/Variables#get"; // untranslated
Blockly.Msg.VARIABLES_GET_SELF = "get self"; // untranslated
Blockly.Msg.VARIABLES_GET_TOOLTIP = "返回此變數的值。";
Blockly.Msg.VARIABLES_SET = "賦值 %1 爲 %2";
Blockly.Msg.VARIABLES_SET_CREATE_GET = "創建\"獲得 %1\"";
Blockly.Msg.VARIABLES_SET_HELPURL = "https://github.com/google/blockly/wiki/Variables#set"; // untranslated
Blockly.Msg.VARIABLES_SET_SELF = "set self"; // untranslated
Blockly.Msg.VARIABLES_SET_SELF_TO = "to"; // untranslated
Blockly.Msg.VARIABLES_SET_TAIL = "="; // untranslated
Blockly.Msg.VARIABLES_SET_TITLE = "set"; // untranslated
Blockly.Msg.VARIABLES_SET_TOOLTIP = "設定此變數，以使它和輸入值相等。";
Blockly.Msg.VARIABLE_ALREADY_EXISTS = "已存在名為\" %1\"的變數。";
Blockly.Msg.VISIONKIT_AIY_VISION_INFERENCE = "AIY Vision Inference"; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR = "Annotator"; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR_BOUNDING = "Annotator Bounding Box"; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR_FILL = "fill="; // untranslated
Blockly.Msg.VISIONKIT_ANNOTATOR_SETTING = "set dimensions:"; // untranslated
Blockly.Msg.VISIONKIT_CAMERA_INFERENCE = "Camera Inference as"; // untranslated
Blockly.Msg.VISIONKIT_CLOUDEVENT_API = "Cloud Event API:"; // untranslated
Blockly.Msg.VISIONKIT_DO = "Do"; // untranslated
Blockly.Msg.VISIONKIT_GETINFERENCE = "Get Inference"; // untranslated
Blockly.Msg.VISIONKIT_GETMODEL_MODEL = "model"; // untranslated
Blockly.Msg.VISIONKIT_GETMODEL_Of = "of"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT = "from"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT_ANNOTATOR = "annotator import"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT_INFERENCE = "inference import"; // untranslated
Blockly.Msg.VISIONKIT_IMPORT_MODELS = "models import"; // untranslated
Blockly.Msg.VISIONKIT_JOY_DETECT = "Detect Joy Score and stored it to Core Cloud"; // untranslated
Blockly.Msg.VISIONKIT_MODEL = "Model"; // untranslated
Blockly.Msg.VISIONKIT_RUN_INFERENCE = "Run inference"; // untranslated
Blockly.Msg.VISIONKIT_SETUP = "Google AIY Vision Kit Setup"; // untranslated
Blockly.Msg.VISIONKIT_USE_MODEL = "Use model"; // untranslated
Blockly.Msg.VOICEKIT_ASSISTANT = "Assistant"; // untranslated
Blockly.Msg.VOICEKIT_DEMO_1 = "Command Control Demo"; // untranslated
Blockly.Msg.VOICEKIT_DEMO_2 = "Via Google Assistant"; // untranslated
Blockly.Msg.VOICEKIT_EVENTTYPE_ASSISTANT = "Assistant Event Type:"; // untranslated
Blockly.Msg.VOICEKIT_EVENTTYPE_IMPORT = "import EventType"; // untranslated
Blockly.Msg.VOICEKIT_EVENT_ARGS = "event args"; // untranslated
Blockly.Msg.VOICEKIT_EVENT_OF = "of"; // untranslated
Blockly.Msg.VOICEKIT_EVENT_TYPE_OF = "event type of"; // untranslated
Blockly.Msg.VOICEKIT_FROM = "from"; // untranslated
Blockly.Msg.VOICEKIT_GET_CREDENTIAL = "Get Assistant Credential"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_ASSISTANT = "import Assistant"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_AUTH = "import auth_helpers"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_TTS = "import TTS"; // untranslated
Blockly.Msg.VOICEKIT_IMPORT_TTS_SAY = "aiy.voice.tts.say"; // untranslated
Blockly.Msg.VOICEKIT_SETUP = "Google AIY Voice Kit Setup"; // untranslated
Blockly.Msg.VOICEKIT_SET_CREDENTIAL = "set credential for Assistant"; // untranslated
Blockly.Msg.VOICEKIT_SET_DO = "do"; // untranslated
Blockly.Msg.VOICEKIT_SET_FROM = "from"; // untranslated
Blockly.Msg.PROCEDURES_DEFRETURN_TITLE = Blockly.Msg.PROCEDURES_DEFNORETURN_TITLE;
Blockly.Msg.CONTROLS_IF_IF_TITLE_IF = Blockly.Msg.CONTROLS_IF_MSG_IF;
Blockly.Msg.CONTROLS_WHILEUNTIL_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.CONTROLS_IF_MSG_THEN = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.CONTROLS_IF_ELSE_TITLE_ELSE = Blockly.Msg.CONTROLS_IF_MSG_ELSE;
Blockly.Msg.PROCEDURES_DEFRETURN_PROCEDURE = Blockly.Msg.PROCEDURES_DEFNORETURN_PROCEDURE;
Blockly.Msg.LISTS_GET_SUBLIST_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.LISTS_GET_INDEX_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.MATH_CHANGE_TITLE_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.VARIABLES_SET_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.PROCEDURES_DEFRETURN_DO = Blockly.Msg.PROCEDURES_DEFNORETURN_DO;
Blockly.Msg.CONTROLS_IF_ELSEIF_TITLE_ELSEIF = Blockly.Msg.CONTROLS_IF_MSG_ELSEIF;
Blockly.Msg.LISTS_GET_INDEX_HELPURL = Blockly.Msg.LISTS_INDEX_OF_HELPURL;
Blockly.Msg.CONTROLS_FOREACH_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.LISTS_SET_INDEX_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.CONTROLS_FOR_INPUT_DO = Blockly.Msg.CONTROLS_REPEAT_INPUT_DO;
Blockly.Msg.LISTS_CREATE_WITH_ITEM_TITLE = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.TEXT_APPEND_VARIABLE = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.TEXT_CREATE_JOIN_ITEM_TITLE_ITEM = Blockly.Msg.VARIABLES_DEFAULT_NAME;
Blockly.Msg.LISTS_INDEX_OF_INPUT_IN_LIST = Blockly.Msg.LISTS_INLIST;
Blockly.Msg.PROCEDURES_DEFRETURN_COMMENT = Blockly.Msg.PROCEDURES_DEFNORETURN_COMMENT;

Blockly.Msg.CONTROL_FOREVER = "重複執行"
Blockly.Msg.CONTROL_REPEAT = "重複執行 %1 次"
Blockly.Msg.CONTROL_IF = "如果 %1 那麼"
Blockly.Msg.CONTROL_ELSE = "否則"
Blockly.Msg.CONTROL_STOP = "停止"
Blockly.Msg.CONTROL_STOP_ALL = "全部腳本"
Blockly.Msg.CONTROL_STOP_THIS = "這個腳本"
Blockly.Msg.CONTROL_STOP_OTHER = "該角色的其他腳本"
Blockly.Msg.CONTROL_WAIT = "等待 %1 秒"
Blockly.Msg.CONTROL_WAITUNTIL = "在 %1 之前壹直等待"
Blockly.Msg.CONTROL_REPEATUNTIL = "重複執行直到 %1"
Blockly.Msg.CONTROL_WHILE = "當 %1 重複執行"
Blockly.Msg.CONTROL_FOREACH = "對於 %2 中的每個 %1"
Blockly.Msg.CONTROL_STARTASCLONE = "當作為克隆體啟動時"
Blockly.Msg.CONTROL_CREATECLONEOF = "克隆 %1"
Blockly.Msg.CONTROL_CREATECLONEOF_MYSELF = "自己"
Blockly.Msg.CONTROL_DELETETHISCLONE = "刪除此克隆體"
Blockly.Msg.CONTROL_COUNTER = "計數器"
Blockly.Msg.CONTROL_INCRCOUNTER = "計數器加壹"
Blockly.Msg.CONTROL_CLEARCOUNTER = "計數器歸零"
Blockly.Msg.CONTROL_ALLATONCE = "所有腳本"
Blockly.Msg.DATA_SETVARIABLETO = "將 %1 設為 %2"
Blockly.Msg.DATA_CHANGEVARIABLEBY = "將 %1 增加 %2"
Blockly.Msg.DATA_SHOWVARIABLE = "顯示變數 %1"
Blockly.Msg.DATA_HIDEVARIABLE = "隱藏變數 %1"
Blockly.Msg.DATA_ADDTOLIST = "將 %1 加入 %2"
Blockly.Msg.DATA_DELETEOFLIST = "刪除 %2 的第 %1 項"
Blockly.Msg.DATA_DELETEALLOFLIST = "刪除 %1 的全部項目"
Blockly.Msg.DATA_INSERTATLIST = "在 %3 的第 %2 項插入 %1"
Blockly.Msg.DATA_REPLACEITEMOFLIST = "將 %2 的第 %1 項替換為 %3"
Blockly.Msg.DATA_ITEMOFLIST = "%2 的第 %1 項"
Blockly.Msg.DATA_ITEMNUMOFLIST = "%2 中首個 %1 的編號"
Blockly.Msg.DATA_LENGTHOFLIST = "%1 的項目數"
Blockly.Msg.DATA_LISTCONTAINSITEM = "%1 包含 %2 ?"
Blockly.Msg.DATA_SHOWLIST = "顯示陣列 %1"
Blockly.Msg.DATA_HIDELIST = "隱藏陣列 %1"
Blockly.Msg.DATA_INDEX_ALL = "全部"
Blockly.Msg.DATA_INDEX_LAST = "末尾"
Blockly.Msg.DATA_INDEX_RANDOM = "隨機"
Blockly.Msg.EVENT_WHENFLAGCLICKED = "當 %1 被點擊"
Blockly.Msg.EVENT_WHENTHISSPRITECLICKED = "當角色被點擊"
Blockly.Msg.EVENT_WHENSTAGECLICKED = "當舞臺被點擊"
Blockly.Msg.EVENT_WHENTOUCHINGOBJECT = "當該角色碰到 %1"
Blockly.Msg.EVENT_WHENBROADCASTRECEIVED = "當接收到 %1"
Blockly.Msg.EVENT_WHENBACKDROPSWITCHESTO = "當背景換成 %1"
Blockly.Msg.EVENT_WHENGREATERTHAN = "當 %1 > %2"
Blockly.Msg.EVENT_WHENGREATERTHAN_TIMER = "計時器"
Blockly.Msg.EVENT_WHENGREATERTHAN_LOUDNESS = "響度"
Blockly.Msg.EVENT_BROADCAST = "廣播 %1"
Blockly.Msg.EVENT_BROADCASTANDWAIT = "廣播 %1 並等待"
Blockly.Msg.EVENT_WHENKEYPRESSED = "當按下 %1 鍵"
Blockly.Msg.EVENT_WHENKEYPRESSED_SPACE = "空格"
Blockly.Msg.EVENT_WHENKEYPRESSED_LEFT = "←"
Blockly.Msg.EVENT_WHENKEYPRESSED_RIGHT = "→"
Blockly.Msg.EVENT_WHENKEYPRESSED_DOWN = "↓"
Blockly.Msg.EVENT_WHENKEYPRESSED_UP = "↑"
Blockly.Msg.EVENT_WHENKEYPRESSED_ANY = "任意"
Blockly.Msg.LOOKS_SAYFORSECS = "說 %1 %2 秒"
Blockly.Msg.LOOKS_SAY = "說 %1"
Blockly.Msg.LOOKS_HELLO = "妳好！"
Blockly.Msg.LOOKS_THINKFORSECS = "思考 %1 %2 秒"
Blockly.Msg.LOOKS_THINK = "思考 %1"
Blockly.Msg.LOOKS_HMM = "嗯……"
Blockly.Msg.LOOKS_SHOW = "顯示"
Blockly.Msg.LOOKS_HIDE = "隱藏"
Blockly.Msg.LOOKS_HIDEALLSPRITES = "隱藏所有角色"
Blockly.Msg.LOOKS_EFFECT_COLOR = "顏色"
Blockly.Msg.LOOKS_EFFECT_FISHEYE = "魚眼"
Blockly.Msg.LOOKS_EFFECT_WHIRL = "漩渦"
Blockly.Msg.LOOKS_EFFECT_PIXELATE = "像素化"
Blockly.Msg.LOOKS_EFFECT_MOSAIC = "馬賽克"
Blockly.Msg.LOOKS_EFFECT_BRIGHTNESS = "亮度"
Blockly.Msg.LOOKS_EFFECT_GHOST = "虛像"
Blockly.Msg.LOOKS_CHANGEEFFECTBY = "將 %1 特效增加 %2"
Blockly.Msg.LOOKS_SETEFFECTTO = "將 %1 特效設定為 %2"
Blockly.Msg.LOOKS_CLEARGRAPHICEFFECTS = "清除圖形特效"
Blockly.Msg.LOOKS_CHANGESIZEBY = "將大小增加 %1"
Blockly.Msg.LOOKS_SETSIZETO = "將大小設為 %1"
Blockly.Msg.LOOKS_SIZE = "大小"
Blockly.Msg.LOOKS_CHANGESTRETCHBY = "伸縮%1"
Blockly.Msg.LOOKS_SETSTRETCHTO = "設定伸縮為%1 %"
Blockly.Msg.LOOKS_SWITCHCOSTUMETO = "換成 %1 造型"
Blockly.Msg.LOOKS_NEXTCOSTUME = "下一個造型"
Blockly.Msg.LOOKS_SWITCHBACKDROPTO = "換成 %1 背景"
Blockly.Msg.LOOKS_GOTOFRONTBACK = "移到最 %1 "
Blockly.Msg.LOOKS_GOTOFRONTBACK_FRONT = "前面"
Blockly.Msg.LOOKS_GOTOFRONTBACK_BACK = "後面"
Blockly.Msg.LOOKS_GOFORWARDBACKWARDLAYERS = "%1 %2 層"
Blockly.Msg.LOOKS_GOFORWARDBACKWARDLAYERS_FORWARD = "前移"
Blockly.Msg.LOOKS_GOFORWARDBACKWARDLAYERS_BACKWARD = "後移"
Blockly.Msg.LOOKS_BACKDROPNUMBERNAME = "背景 %1"
Blockly.Msg.LOOKS_COSTUMENUMBERNAME = "造型 %1"
Blockly.Msg.LOOKS_NUMBERNAME_NUMBER = "編號"
Blockly.Msg.LOOKS_NUMBERNAME_NAME = "名稱"
Blockly.Msg.LOOKS_SWITCHBACKDROPTOANDWAIT = "換成 %1 背景並等待"
Blockly.Msg.LOOKS_NEXTBACKDROP_BLOCK = "下一個背景"
Blockly.Msg.LOOKS_NEXTBACKDROP = "下一個背景"
Blockly.Msg.LOOKS_PREVIOUSBACKDROP = "上一個背景"
Blockly.Msg.LOOKS_RANDOMBACKDROP = "隨機背景"
Blockly.Msg.MOTION_MOVESTEPS = "移動 %1 步"
Blockly.Msg.MOTION_TURNLEFT = "左轉 %1 %2 度"
Blockly.Msg.MOTION_TURNRIGHT = "右轉 %1 %2 度"
Blockly.Msg.MOTION_POINTINDIRECTION = "面向 %1 方向"
Blockly.Msg.MOTION_POINTTOWARDS = "面向 %1"
Blockly.Msg.MOTION_POINTTOWARDS_POINTER = "鼠標指針"
Blockly.Msg.MOTION_GOTO = "移到 %1"
Blockly.Msg.MOTION_GOTO_POINTER = "鼠標指針"
Blockly.Msg.MOTION_GOTO_RANDOM = "隨機位置"
Blockly.Msg.MOTION_GOTOXY = "移到 x: %1 y: %2"
Blockly.Msg.MOTION_GLIDESECSTOXY = "在 %1 秒內滑行到 x: %2 y: %3"
Blockly.Msg.MOTION_GLIDETO = "在 %1 秒內滑行到 %2"
Blockly.Msg.MOTION_GLIDETO_POINTER = "鼠標指針"
Blockly.Msg.MOTION_GLIDETO_RANDOM = "隨機位置"
Blockly.Msg.MOTION_CHANGEXBY = "將x座標增加 %1"
Blockly.Msg.MOTION_SETX = "將x座標設為 %1"
Blockly.Msg.MOTION_CHANGEYBY = "將y座標增加 %1"
Blockly.Msg.MOTION_SETY = "將y座標設為 %1"
Blockly.Msg.MOTION_IFONEDGEBOUNCE = "碰到邊緣就反彈"
Blockly.Msg.MOTION_SETROTATIONSTYLE = "將旋轉方式設為 %1"
Blockly.Msg.MOTION_SETROTATIONSTYLE_LEFTRIGHT = "左右翻轉"
Blockly.Msg.MOTION_SETROTATIONSTYLE_DONTROTATE = "不可旋轉"
Blockly.Msg.MOTION_SETROTATIONSTYLE_ALLAROUND = "任意旋轉"
Blockly.Msg.MOTION_XPOSITION = "x 座標"
Blockly.Msg.MOTION_YPOSITION = "y 座標"
Blockly.Msg.MOTION_DIRECTION = "方向"
Blockly.Msg.MOTION_SCROLLRIGHT = "向右滾動 %1"
Blockly.Msg.MOTION_SCROLLUP = "向上滾動 %1"
Blockly.Msg.MOTION_ALIGNSCENE = "和場景 %1 對齊"
Blockly.Msg.MOTION_ALIGNSCENE_BOTTOMLEFT = "左下角"
Blockly.Msg.MOTION_ALIGNSCENE_BOTTOMRIGHT = "右下角"
Blockly.Msg.MOTION_ALIGNSCENE_MIDDLE = "中間"
Blockly.Msg.MOTION_ALIGNSCENE_TOPLEFT = "左上角"
Blockly.Msg.MOTION_ALIGNSCENE_TOPRIGHT = "右上角"
Blockly.Msg.MOTION_XSCROLL = "x滾動位置"
Blockly.Msg.MOTION_YSCROLL = "y滾動位置"
Blockly.Msg.MOTION_STAGE_SELECTED = "選中了舞臺：不可使用運動類積木"
Blockly.Msg.OPERATORS_ADD = "%1 + %2"
Blockly.Msg.OPERATORS_SUBTRACT = "%1 - %2"
Blockly.Msg.OPERATORS_MULTIPLY = "%1 * %2"
Blockly.Msg.OPERATORS_DIVIDE = "%1 / %2"
Blockly.Msg.OPERATORS_RANDOM = "在 %1 和 %2 中隨機選一個數"
Blockly.Msg.OPERATORS_GT = "%1 > %2"
Blockly.Msg.OPERATORS_LT = "%1 < %2"
Blockly.Msg.OPERATORS_EQUALS = "%1 = %2"
Blockly.Msg.OPERATORS_AND = "%1 與 %2"
Blockly.Msg.OPERATORS_OR = "%1 或 %2"
Blockly.Msg.OPERATORS_NOT = "%1 不成立"
Blockly.Msg.OPERATORS_JOIN = "連接 %1 和 %2"
Blockly.Msg.OPERATORS_JOIN_APPLE = "蘋果"
Blockly.Msg.OPERATORS_JOIN_BANANA = "香蕉"
Blockly.Msg.OPERATORS_LETTEROF = "%2 的第 %1 個字符"
Blockly.Msg.OPERATORS_LETTEROF_APPLE = "果"
Blockly.Msg.OPERATORS_LENGTH = "%1 的長度"
Blockly.Msg.OPERATORS_CONTAINS = "%1 包含 %2 ?"
Blockly.Msg.OPERATORS_MOD = "%1 除以 %2 的餘數"
Blockly.Msg.OPERATORS_ROUND = "將 %1 四舍五入"
Blockly.Msg.OPERATORS_MATHOP = "%2 的 %1"
Blockly.Msg.OPERATORS_MATHOP_ABS = "絕對值"
Blockly.Msg.OPERATORS_MATHOP_FLOOR = "向下取整"
Blockly.Msg.OPERATORS_MATHOP_CEILING = "向上取整"
Blockly.Msg.OPERATORS_MATHOP_SQRT = "平方根"
Blockly.Msg.OPERATORS_MATHOP_SIN = "sin"
Blockly.Msg.OPERATORS_MATHOP_COS = "cos"
Blockly.Msg.OPERATORS_MATHOP_TAN = "tan"
Blockly.Msg.OPERATORS_MATHOP_ASIN = "asin"
Blockly.Msg.OPERATORS_MATHOP_ACOS = "acos"
Blockly.Msg.OPERATORS_MATHOP_ATAN = "atan"
Blockly.Msg.OPERATORS_MATHOP_LN = "ln"
Blockly.Msg.OPERATORS_MATHOP_LOG = "log"
Blockly.Msg.OPERATORS_MATHOP_EEXP = "e ^"
Blockly.Msg.OPERATORS_MATHOP_10EXP = "10 ^"
Blockly.Msg.PROCEDURES_DEFINITION = "定義 %1"
Blockly.Msg.SENSING_TOUCHINGOBJECT = "碰到 %1 ?"
Blockly.Msg.SENSING_TOUCHINGOBJECT_POINTER = "鼠標指針"
Blockly.Msg.SENSING_TOUCHINGOBJECT_EDGE = "舞臺邊緣"
Blockly.Msg.SENSING_TOUCHINGCOLOR = "碰到顏色 %1 ?"
Blockly.Msg.SENSING_COLORISTOUCHINGCOLOR = "顏色 %1 碰到 %2 ?"
Blockly.Msg.SENSING_DISTANCETO = "到 %1 的距離"
Blockly.Msg.SENSING_DISTANCETO_POINTER = "鼠標指針"
Blockly.Msg.SENSING_ASKANDWAIT = "詢問 %1 並等待"
Blockly.Msg.SENSING_ASK_TEXT = "妳叫什麼名字？"
Blockly.Msg.SENSING_ANSWER = "回答"
Blockly.Msg.SENSING_KEYPRESSED = "按下 %1 鍵?"
Blockly.Msg.SENSING_MOUSEDOWN = "按下鼠標?"
Blockly.Msg.SENSING_MOUSEX = "鼠標的x座標"
Blockly.Msg.SENSING_MOUSEY = "鼠標的y座標"
Blockly.Msg.SENSING_SETDRAGMODE = "將拖動模式設為 %1"
Blockly.Msg.SENSING_SETDRAGMODE_DRAGGABLE = "可拖動"
Blockly.Msg.SENSING_SETDRAGMODE_NOTDRAGGABLE = "不可拖動"
Blockly.Msg.SENSING_LOUDNESS = "響度"
Blockly.Msg.SENSING_LOUD = "響聲？"
Blockly.Msg.SENSING_TIMER = "計時器"
Blockly.Msg.SENSING_RESETTIMER = "計時器歸零"
Blockly.Msg.SENSING_OF = "%2 的 %1"
Blockly.Msg.SENSING_OF_XPOSITION = "x 座標"
Blockly.Msg.SENSING_OF_YPOSITION = "y 座標"
Blockly.Msg.SENSING_OF_DIRECTION = "方向"
Blockly.Msg.SENSING_OF_COSTUMENUMBER = "造型編號"
Blockly.Msg.SENSING_OF_COSTUMENAME = "造型名稱"
Blockly.Msg.SENSING_OF_SIZE = "大小"
Blockly.Msg.SENSING_OF_VOLUME = "音量"
Blockly.Msg.SENSING_OF_BACKDROPNUMBER = "背景編號"
Blockly.Msg.SENSING_OF_BACKDROPNAME = "背景名稱"
Blockly.Msg.SENSING_OF_STAGE = "舞臺"
Blockly.Msg.SENSING_CURRENT = "當前時間的 %1"
Blockly.Msg.SENSING_CURRENT_YEAR = "年"
Blockly.Msg.SENSING_CURRENT_MONTH = "月"
Blockly.Msg.SENSING_CURRENT_DATE = "日"
Blockly.Msg.SENSING_CURRENT_DAYOFWEEK = "星期"
Blockly.Msg.SENSING_CURRENT_HOUR = "時"
Blockly.Msg.SENSING_CURRENT_MINUTE = "分"
Blockly.Msg.SENSING_CURRENT_SECOND = "秒"
Blockly.Msg.SENSING_DAYSSINCE2000 = "2000年至今的天數"
Blockly.Msg.SENSING_USERNAME = "用戶名"
Blockly.Msg.SENSING_USERID = "用戶id"
Blockly.Msg.SOUND_PLAY = "播放聲音 %1"
Blockly.Msg.SOUND_PLAYUNTILDONE = "播放聲音 %1 等待播完"
Blockly.Msg.SOUND_STOPALLSOUNDS = "停止所有聲音"
Blockly.Msg.SOUND_SETEFFECTO = "將 %1 音效設為 %2"
Blockly.Msg.SOUND_CHANGEEFFECTBY = "將 %1 音效增加 %2"
Blockly.Msg.SOUND_CLEAREFFECTS = "清除音效"
Blockly.Msg.SOUND_EFFECTS_PITCH = "音調"
Blockly.Msg.SOUND_EFFECTS_PAN = "左右平衡"
Blockly.Msg.SOUND_CHANGEVOLUMEBY = "將音量增加 %1"
Blockly.Msg.SOUND_SETVOLUMETO = "將音量設為 %1%"
Blockly.Msg.SOUND_VOLUME = "音量"
Blockly.Msg.SOUND_RECORD = "錄制…"
Blockly.Msg.CATEGORY_MOTION = "運動"
Blockly.Msg.CATEGORY_LOOKS = "外觀"
Blockly.Msg.CATEGORY_SOUND = "聲音"
Blockly.Msg.CATEGORY_EVENTS = "事件"
Blockly.Msg.CATEGORY_CONTROL = "控制"
Blockly.Msg.CATEGORY_SENSING = "偵測"
Blockly.Msg.CATEGORY_OPERATORS = "運算"
Blockly.Msg.CATEGORY_VARIABLES = "變數"
Blockly.Msg.CATEGORY_MYBLOCKS = "自制積木"
Blockly.Msg.DUPLICATE = "復制"
Blockly.Msg.DUPLICATE_PASTE = "復制並粘貼"
Blockly.Msg.DELETE = "刪除"
Blockly.Msg.ADD_COMMENT = "添加註釋"
Blockly.Msg.REMOVE_COMMENT = "刪除註釋"
Blockly.Msg.DELETE_BLOCK = "刪除"
Blockly.Msg.DELETE_X_BLOCKS = "刪除 %1 積木"
Blockly.Msg.DELETE_ALL_BLOCKS = "刪除全部 %1 積木？"
Blockly.Msg.CLEAN_UP = "整理積木"
Blockly.Msg.HELP = "幫助"
Blockly.Msg.UNDO = "撤銷"
Blockly.Msg.REDO = "重做"
Blockly.Msg.EDIT_PROCEDURE = "編輯"
Blockly.Msg.SHOW_PROCEDURE_DEFINITION = "查看定義"
Blockly.Msg.WORKSPACE_COMMENT_DEFAULT_TEXT = "說些什麼……"
Blockly.Msg.COLOUR_HUE_LABEL = "顏色"
Blockly.Msg.COLOUR_SATURATION_LABEL = "飽和度"
Blockly.Msg.COLOUR_BRIGHTNESS_LABEL = "亮度"
Blockly.Msg.CHANGE_VALUE_TITLE = "更改變數："
Blockly.Msg.RENAME_VARIABLE = "修改變數名"
Blockly.Msg.RENAME_VARIABLE_TITLE = "將所有的「%1」變數名改為："
Blockly.Msg.RENAME_VARIABLE_MODAL_TITLE = "修改變數名"
Blockly.Msg.NEW_VARIABLE = "建立一個變數"
Blockly.Msg.NEW_VARIABLE_TITLE = "新變數名："
Blockly.Msg.VARIABLE_MODAL_TITLE = "新建變數"
Blockly.Msg.VARIABLE_ALREADY_EXISTS = "已經存在名為「%1」的變數。"
Blockly.Msg.VARIABLE_ALREADY_EXISTS_FOR_ANOTHER_TYPE = "已經存在一個名為「%1」的變數，其類型為「%2」。"
Blockly.Msg.DELETE_VARIABLE_CONFIRMATION = "刪除%1處「%2」變數嗎？"
Blockly.Msg.CANNOT_DELETE_VARIABLE_PROCEDURE = "無法刪除變數「%1」，因為函數「%2」的定義中用到了它"
Blockly.Msg.DELETE_VARIABLE = "刪除變數「%1」"
Blockly.Msg.NEW_PROCEDURE = "制作新的積木"
Blockly.Msg.PROCEDURE_ALREADY_EXISTS = "已經存在名為「%1」的程序。"
Blockly.Msg.PROCEDURE_DEFAULT_NAME = "積木名稱"
Blockly.Msg.NEW_LIST = "建立一個陣列"
Blockly.Msg.NEW_LIST_TITLE = "新的陣列名："
Blockly.Msg.LIST_MODAL_TITLE = "新建陣列"
Blockly.Msg.LIST_ALREADY_EXISTS = "名為 「%1」 的陣列已存在。"
Blockly.Msg.RENAME_LIST_TITLE = "將所有的「%1」的陣列名改為："
Blockly.Msg.RENAME_LIST_MODAL_TITLE = "修改陣列名"
Blockly.Msg.DEFAULT_LIST_ITEM = "東西"
Blockly.Msg.NEW_BROADCAST_MESSAGE = "新消息"
Blockly.Msg.NEW_BROADCAST_MESSAGE_TITLE = "新消息的名稱："
Blockly.Msg.BROADCAST_MODAL_TITLE = "新消息"
Blockly.Msg.DEFAULT_BROADCAST_MESSAGE_NAME = "消息1"
Blockly.Msg.GROVEZERO_MINIWHEEL_SET_POWER = "%1 %2 小車底盤 左輪動力 %3 %，右輪動力 %4 %"
Blockly.Msg.GROVEZERO_MINIWHEEL_STOP = "%1 %2 小車底盤 停止運動"
Blockly.Msg.GROVEZERO_MINIWHEEL_RUN_VELOCITY_AZIMUTH = "%1 %2 小車底盤 以 %3 %4"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT1 = "慢速"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT2 = "中速"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT3 = "快速"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT4 = "前進"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT5 = "後退"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT6 = "左轉"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT7 = "右轉"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT8 = "順時針轉"
Blockly.Msg.GROVEZERO_MINIWHEEL_OPT9 = "逆時針轉"
Blockly.Msg.GROVEZERO_MOTOR_STOP = "%1 %2 %3 直流減速電機 停止轉動"
Blockly.Msg.GROVEZERO_DC_MOTOR_TRUN_POWER = "%1 %2 %3 直流減速電機 開始轉動 動力 %4 %"
Blockly.Msg.GROVEZERO_SERVO_TURN_ANGLE = "%1 %2 舵機 轉到 %3 度"
Blockly.Msg.GROVEZERO_RGB_TO_COLOR = "%1 %2 紅 %3 綠 %4 藍 %5"
Blockly.Msg.GROVEZERO_HSL_TO_COLOR = "%1 %2 顏色 %3 飽和度 %4 亮度 %5"
Blockly.Msg.GROVEZERO_LED_MATRIX_XY_IS_ON = "%1 %2 LED 矩陣 x:%3 y:%4 是否被點亮？"
Blockly.Msg.GROVEZERO_LED_MATRIX_SHOW_SHAPE = "%1 %2 LED 矩陣 顯示圖案 %3"
Blockly.Msg.GROVEZERO_LED_MATRIX_SHOW_STRING = "%1 %2 LED 矩陣 顯示字串 %3"
Blockly.Msg.GROVEZERO_LED_MATRIX_XY_SET_ON = "%1 %2 LED 矩陣 點亮 x: %3 y: %4"
Blockly.Msg.GROVEZERO_LED_MATRIX_XY_SET_OFF = "%1 %2 LED 矩陣 熄滅 x: %3 y: %4"
Blockly.Msg.GROVEZERO_LED_MATRIX_CLEAN = "%1 %2 LED 矩陣 全部熄滅"
Blockly.Msg.GROVEZERO_RGB_LED_SHOW_STYLE_COLOR = "%1 %2 可調彩燈 壹直 %3 %4"
Blockly.Msg.GROVEZERO_RGB_LED_SHOW_STYLE = "%1 %2 可調彩燈 %3 效果"
Blockly.Msg.GROVEZERO_RGB_LED_FADE_FROM_COLOR1_TO_COLOR2 = "%1 %2 可調彩燈 從 %3 漸變到 %4"
Blockly.Msg.GROVEZERO_RGB_LED_SET_BRIGHTNESS = "%1 %2 可調彩燈 設定亮度為 %3 %"
Blockly.Msg.GROVEZERO_RGB_LED_LIGHT_OFF = "%1 %2 可調彩燈 熄滅"
Blockly.Msg.GROVEZERO_RGB_LED_OPT1 = "亮"
Blockly.Msg.GROVEZERO_RGB_LED_OPT2 = "閃爍"
Blockly.Msg.GROVEZERO_RGB_LED_OPT3 = "呼吸"
Blockly.Msg.GROVEZERO_RGB_LED_OPT4 = "彩虹燈"
Blockly.Msg.GROVEZERO_RGB_LED_OPT5 = "隨機色"
Blockly.Msg.GROVEZERO_RGB_MATRIX_SHOW_SHAPE = "%1 %2 %3 RGB LED 矩陣 顯示圖案 %4"
Blockly.Msg.GROVEZERO_RGB_MATRIX_SHOW_STRING = "%1 %2 %3 RGB LED 矩陣 顯示字串 %4 %5"
Blockly.Msg.GROVEZERO_RGB_MATRIX_SHOW_ANIMA = "%1 %2 %3 RGB LED 矩陣 顯示動畫 %4"
Blockly.Msg.GROVEZERO_RGB_MATRIX_SHOW_HISTOGRAM = "%1 %2 %3 RGB LED 矩陣 繪制柱狀圖 值為 %4"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON = "%1 %2 %3 RGB LED 矩陣 點亮 x: %4 y: %5 %6"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_OFF = "%1 %2 %3 RGB LED 矩陣 熄滅 x: %4 y: %5"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OFF = "%1 %2 %3 RGB LED 矩陣 開關 x: %4 y: %5 %6"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_IS_ON = "%1 %2 %3 RGB LED 矩陣 x: %4 y: %5 被點亮"
Blockly.Msg.GROVEZERO_RGB_MATRIX_CLEAN = "%1 %2 %3 RGB LED 矩陣 全部熄滅"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_GET_COLOR = "%1 %2 %3 RGB LED 矩陣 x: %4 y: %5 顏色值"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT1 = "波浪"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT2 = "順時針畫大方形"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT3 = "順時針畫小方形"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT4 = "逆時針畫大方形"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT5 = "逆時針畫小方形"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT6 = "變幻"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT7 = "火焰"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT8 = "行走"
Blockly.Msg.GROVEZERO_RGB_MATRIX_ARGS_ANIMA_OPT9 = "心碎"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT1 = "紅"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT2 = "橙"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT3 = "黃"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT4 = "綠"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT5 = "青"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT6 = "藍"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT7 = "紫"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT8 = "粉紅"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT9 = "白"
Blockly.Msg.GROVEZERO_RGB_MATRIX_XY_SET_ON_OPT10 = "黑"
Blockly.Msg.GROVEZERO_FOUR_DIGIT_WHEN_COUNTDOWN_END = "%1 %2 四位數碼管 倒數結束"
Blockly.Msg.GROVEZERO_FOUR_DIGIT_SHOW_NUMBER = "%1 %2 四位數碼管 顯示 %3"
Blockly.Msg.GROVEZERO_FOUR_DIGIT_START_COUNTDOWN = "%1 %2 四位數碼管 開始倒數 %3 秒"
Blockly.Msg.GROVEZERO_FOUR_DIGIT_OFF = "%1 %2 四位數碼管 熄滅"
Blockly.Msg.GROVEZERO_FOUR_DIGIT_SET_BRIGHTNESS = "%1 %2 四位數碼管 設定亮度 %3 %"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY = "%1 %2 蜂鳴器 播放旋律 %3 壹次"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT0 = "ba ding"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT1 = "wawawawaa"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT2 = "jump up"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT3 = "jump down"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT4 = "power up"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT5 = "power down"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT6 = "magic wand"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_MELODY_OPT7 = "siren"
Blockly.Msg.GROVEZERO_BUZZER_MUTE_FOR_BEAT = "%1 %2 蜂鳴器 停頓 %3 拍"
Blockly.Msg.GROVEZERO_BUZZER_SET_BPM = "%1 %2 蜂鳴器 將節奏(bpm) 設定為 %3"
Blockly.Msg.GROVEZERO_BUZZER_ADD_BPM = "%1 %2 蜂鳴器 將節奏(bpm) 增加 %3"
Blockly.Msg.GROVEZERO_BUZZER_GET_BPM = "%1 %2  蜂鳴器 節奏(bpm)"
Blockly.Msg.GROVEZERO_BUZZER_STOP = "%1 %2 蜂鳴器 停止播放"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_NOTE = "%1 %2 蜂鳴器 持續播放音符  %3"
Blockly.Msg.GROVEZERO_BUZZER_PLAY_NOTE_FOR_BEAT = "%1 %2 蜂鳴器 彈奏音符 %3 持續 %4 拍"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT0 = "低 C"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT1 = "低 D"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT2 = "低 E"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT3 = "低 F"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT4 = "低 G"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT5 = "低 A"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT6 = "低 B"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT7 = "中 C"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT8 = "中 D"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT9 = "中 E"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT10 = "中 F"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT11 = "中 G"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT12 = "中 A"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT13 = "中 B"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT14 = "高 C"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT15 = "高 D"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT16 = "高 E"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT17 = "高 F"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT18 = "高 G"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT19 = "高 A"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT20 = "高 B"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT21 = "低 C#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT22 = "低 D#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT23 = "低 F#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT24 = "低 G#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT25 = "低 A#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT26 = "中 C#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT27 = "中 D#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT28 = "中 F#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT29 = "中 G#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT30 = "中 A#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT31 = "高 C#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT32 = "高 D#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT33 = "高 F#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT34 = "高 G#"
Blockly.Msg.SOUND_BUZZER_NOTES_OPT35 = "高 A#"
Blockly.Msg.GROVEZERO_MP3_START_PLAY = "%1 %2 MP3播放器 播放第 %3 首歌"
Blockly.Msg.GROVEZERO_MP3_PAUSE_OR_PLAY = "%1 %2 MP3播放器 %3 播放"
Blockly.Msg.GROVEZERO_MP3_SWITCH = "%1 %2 MP3播放器 %3"
Blockly.Msg.GROVEZERO_MP3_ADD_VOLUME = "%1 %2 MP3播放器 將音量增加 %3 %"
Blockly.Msg.GROVEZERO_MP3_SET_VOLUME = "%1 %2 MP3播放器 將音量設定為 %3 %"
Blockly.Msg.GROVEZERO_MP3_STOP_PLAY = "%1 %2 MP3播放器 停止播放"
Blockly.Msg.GROVEZERO_MP3_PLAY_MODE = "%1 %2 MP3播放器 模式為 %3"
Blockly.Msg.GROVEZERO_MP3_PAUSE_OR_PLAY_OPT0 = "暫停"
Blockly.Msg.GROVEZERO_MP3_PAUSE_OR_PLAY_OPT1 = "恢復"
Blockly.Msg.GROVEZERO_MP3_SWITCH_OPT0 = "下壹首"
Blockly.Msg.GROVEZERO_MP3_SWITCH_OPT1 = "上壹首"
Blockly.Msg.GROVEZERO_MP3_PLAY_MODE_OPT0 = "順序播放"
Blockly.Msg.GROVEZERO_MP3_PLAY_MODE_OPT1 = "隨機播放"
Blockly.Msg.GROVEZERO_MP3_PLAY_MODE_OPT2 = "單曲循環"
Blockly.Msg.GROVEZERO_MAINBOARD_START = "%1 %2 當控制板啟動時"
Blockly.Msg.GROVEZERO_MAINBOARD_WHEN_ARRIVAL_TIME = "%1 %2 當計時器大於 %3 秒"
Blockly.Msg.GROVEZERO_MAINBOARD_WHEN_RADIO_RECEIVE = "%1 %2 當無線接收到 %3"
Blockly.Msg.GROVEZERO_MAINBOARD_BROADCAST = "%1 %2 廣播 %3"
Blockly.Msg.GROVEZERO_MAINBOARD_STOP_BROADCAST = "%1 %2 停止廣播"
Blockly.Msg.GROVEZERO_MAINBOARD_SET_BROADCAST_CHANNEL = "%1 %2 設定廣播頻道 %3"
Blockly.Msg.GROVEZERO_TWIN_BUTTON_WHEN_CLICK = "%1 %2 當 %3 雙按鈕開關 的 %4 被 %5"
Blockly.Msg.GROVEZERO_TWIN_BUTTON_IS_PRESSED = "%1 %2 %3 雙按鈕開關 的 %4 正在被按下？"
Blockly.Msg.GROVEZERO_TWIN_BUTTON_WHEN_CLICK_OPT3 = "單擊"
Blockly.Msg.GROVEZERO_TWIN_BUTTON_WHEN_CLICK_OPT5 = "長按"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_WHEN_CHANGE = "%1 %2 當 9軸姿態傳感器 %3"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT0 = "豎直向下"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT1 = "豎直向上"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT2 = "向左傾斜"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT3 = "向右傾斜"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT4 = "正面朝上"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT5 = "正面朝下"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT6 = "被搖晃"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_OPT7 = "自由落體"
Blockly.Msg.GROVEZERO_IMU9_DOF_STATUS_IS = "%1 %2 9軸姿態傳感器 %3 ?"
Blockly.Msg.GROVEZERO_IMU9_DOF_GET_VALUE = "%1 %2 9軸姿態傳感器 %3 軸加速度值(mg)"
Blockly.Msg.GROVEZERO_PIR_MOTION_SENSOR_DETECT_SOMEONE = "%1 %2 當 紅外運動傳感器 檢測到人"
Blockly.Msg.GROVEZERO_MECH_KEY_WHENCLICK = "%1 %2 當 %3 機械按鈕開關 被 %4"
Blockly.Msg.GROVEZERO_MECH_KEY_WHENCLICK_OPT0 = "單擊"
Blockly.Msg.GROVEZERO_MECH_KEY_WHENCLICK_OPT1 = "長按"
Blockly.Msg.GROVEZERO_MECH_KEY_IS_PRESSED = "%1 %2 %3 機械按鈕開關 正在被按下？"
Blockly.Msg.GROVEZERO_MECH_KEY_SET_RGB = "%1 %2 %3 機械按鈕開關 背燈亮 %4"
Blockly.Msg.GROVEZERO_MECH_KEY_CLOSE_RGB = "%1 %2 %3 機械按鈕開關 背燈熄滅"
Blockly.Msg.GROVEZERO_KNOB_WHEN_CHANGE = "%1 %2 當 %3 旋鈕調節器被 %4"
Blockly.Msg.GROVEZERO_KNOB_WHEN_CHANGE_OPT0 = "順時針旋轉"
Blockly.Msg.GROVEZERO_KNOB_WHEN_CHANGE_OPT1 = "逆時針旋轉"
Blockly.Msg.GROVEZERO_KNOB_WHEN_CHANGE_OPT2 = "按下"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE = "%1 %2 當 手勢識別傳感器 檢測到 %3"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT0 = "向左劃"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT1 = "向右劃"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT2 = "向上劃"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT3 = "向下劃"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT4 = "物體靠近"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT5 = "物體遠離"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT6 = "順時針畫圈"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT7 = "逆時針畫圈"
Blockly.Msg.GROVEZERO_GESTURE_SENSOR_WHEN_CHANGE_OPT8 = "手指舞動"
Blockly.Msg.GROVEZERO_TOUCHPAD_IS_PRESSED = "%1 %2 %3 多觸摸開關 腳位 %4 被按下？"
Blockly.Msg.GROVEZERO_TOUCHPAD_WHEN_CLICK = "%1 %2 當 %3 多觸摸開關 腳位 %4 被按下"
Blockly.Msg.GROVEZERO_LIGHT_SENSOR_GET_VALUE = "%1 %2 光線傳感器 光線強度(流明)"
Blockly.Msg.GROVEZERO_SOUND_SENSOR_GET_VALUE = "%1 %2 聲音傳感器 聲音響度"
Blockly.Msg.GROVEZERO_TEMPERATURESENSOR_GET_VALUE = "%1 %2 溫度傳感器 溫度值 %3"
Blockly.Msg.GROVEZERO_TEMPERATURESENSOR_GET_VALUE_OPT0 = "℃"
Blockly.Msg.GROVEZERO_TEMPERATURESENSOR_GET_VALUE_OPT1 = "℉"
Blockly.Msg.GROVEZERO_SLIDER_GET_VALUE = "%1 %2 %3 滑動變阻器 值"
Blockly.Msg.GROVEZERO_ULTRASONIC_SENSOR_GET_VALUE = "%1 %2 超聲波測距傳感器 距離（厘米）"
Blockly.Msg.GROVEZERO_TEMHUM_SENSOR_GET_TEM_VALUE = "%1 %2 溫濕度傳感器 溫度值 %3"
Blockly.Msg.GROVEZERO_TEMHUM_SENSOR_GET_HUM_VALUE = "%1 %2 溫濕度傳感器 濕度值（%）"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_GET_COLOR = "%1 %2 識色循跡傳感器 顏色值"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_POSITION = "%1 %2 識色循跡傳感器 線的位置為 %3"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_POSITiON_OPT0 = "中"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_POSITiON_OPT1 = "右"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_POSITiON_OPT2 = "最右"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_POSITiON_OPT3 = "左"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_POSITiON_OPT4 = "最左"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_POSITiON_OPT5 = "丟失"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_COLOR = "%1 %2 識色循跡傳感器 檢測到 %3 色"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_COLOR_OPT0 = "紅"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_COLOR_OPT1 = "綠"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_COLOR_OPT2 = "藍"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_COLOR_OPT3 = "黑"
Blockly.Msg.GROVEZERO_COLOR_LINE_FOLLOWER_IS_COLOR_OPT4 = "其他"
Blockly.Msg.ARDUINO_SEEED_SERVO_MOVE = "%1 %2 舵機 管腳 %3 角度 %4 延時 %5"
Blockly.Msg.ARDUINO_SEEED_SERVO_READ_DEGREES = "%1 %2 舵機 管腳 %3 讀取讀取"
Blockly.Msg.ARDUINO_SEEED_LED = "%1 %2 LED燈 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_SEEED_BUZZER = "%1 %2 蜂鳴器 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_SEEED_RELAY = "%1 %2 繼電器 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_SEEED_BTN = "%1 %2 按鍵正在被按下 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_TILT = "%1 %2 傾斜傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_TOUCH = "%1 %2 觸摸 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_ROTATION = "%1 %2 旋轉電位計 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_SOUND = "%1 %2 噪聲（模擬） 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_LIGHT = "%1 %2 光線傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_TEMPERATURE = "%1 %2 溫度傳感器 管腳 %3"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_PRINT = "%1 %2 全彩背光LCD屏 打印第1行 %3 打印第2行 %4"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_PRINT2 = "%1 %2 全彩背光LCD屏 在第 %3 行 第 %4 列 打印 %5"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER = "%1 %2 全彩背光LCD屏 %3"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER_OPT1 = "開"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER_OPT2 = "關"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER_OPT3 = "有光標"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER_OPT4 = "無光標"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER_OPT5 = "閃爍"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER_OPT6 = "不閃爍"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_POWER_OPT7 = "清除"
Blockly.Msg.ARDUINO_GROVE_SERIAL_LCD_SETRGB = "%1 %2 全彩背光LCD屏 設定顏色 R %3 G %4 B %5"
Blockly.Msg.ARDUINO_SEEED_TEMPERATURE_HUMIDITY = "%1 %2 溫濕度傳感器 管腳 %3 %4"
Blockly.Msg.ARDUINO_SEEED_TEMPERATURE_HUMIDITY_OPT1 = "溫度"
Blockly.Msg.ARDUINO_SEEED_TEMPERATURE_HUMIDITY_OPT2 = "濕度"
Blockly.Msg.ARDUINO_SEEED_THUMB_JOYSTICK = "%1 %2 拇指控制桿管腳 %3 座標值 %4軸"
Blockly.Msg.ARDUINO_SEEED_ULT = "%1 %2 超聲波測距傳感器距離(cm) 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_LINE_FINDER = "%1 %2 紅外接近傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_LINE_FINDER_R = "%1 %2 巡線傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_WATER = "%1 %2 水分子檢測傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_MAGNETIC_SWITCH = "%1 %2 磁力開關 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_PIR_MOTION = "%1 %2 人體紅外傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_FLAME = "%1 %2 火焰傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_COLLISION = "%1 %2 碰撞傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_HALL = "%1 %2 霍爾電磁開關 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_SLIDE_POT = "%1 %2 滑動電位開關 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_MOISTURE = "%1 %2 土壤濕度傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_4DIGIT_DISPLAY = "%1 %2 4位數碼管 管腳 %3 顯示為 %4"
Blockly.Msg.ARDUINO_SEEED_RGB_LED = "%1 %2 炫彩RGB LED燈 管腳 %3 顯示為 %4 序號 %5"
Blockly.Msg.ARDUINO_SEEED_RGB_LED1 = "%1 %2 炫彩RGB LED燈 管腳 %3 顯示為 R %4 G %5 B %6 序號 %7"
Blockly.Msg.ARDUINO_SEEED_RGB_LED10 = "%1 %2 炫彩RGB LED燈 管腳 %3 顯示為 %4"
Blockly.Msg.ARDUINO_SEEED_RGB_LED11 = "%1 %2 炫彩RGB LED燈 管腳 %3 顯示為 R %4 G %5 B %6"
Blockly.Msg.ARDUINO_SEEED_SPEAKER = "%1 %2 揚聲器 管腳 %3 播放音符 %4 以%5拍"
Blockly.Msg.ARDUINO_SEEED_RECORDER = "%1 %2 錄音播放模組 管腳 %3 %4"
Blockly.Msg.ARDUINO_SEEED_EL_DRIVER = "%1 %2 冷光條驅動 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_SEEED_EL_VIBRATION_MOTOR = "%1 %2 震動馬達 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_SEEED_ELECTROMAGNET = "%1 %2 電磁鐵模組 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_SEEED_MINI_FAN = "%1 %2 迷妳風扇 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_GROVE_SERIAL_3ADA = "%1 %2 三軸數字加速度（16g） %3 軸"
Blockly.Msg.ARDUINO_GROVE_SERIAL_TOUCH = "%1 %2 多通道觸摸傳感器 通道 %3"
Blockly.Msg.ARDUINO_GROVE_SERIAL_MINI_MOTOR_DRIVER = "%1 %2 迷妳電機驅動模組 電機 %3 轉速（-255~255）%4"
Blockly.Msg.ARDUINO_GROVE_SERIAL_MINI_MOTOR_DRIVER_STOP = "%1 %2 迷妳電機驅動模組 電機 %3 停止"
Blockly.Msg.ARDUINO_SEEED_LED_STRING_LIGHT = "%1 %2 LED燈條 管腳 %3 編號 %4 顯示為 R %5 G %6 B %7"
Blockly.Msg.ARDUINO_SEEED_LED_BAR = "%1 %2 柱狀發光二級管 管腳 %3 %4 %5"
Blockly.Msg.ARDUINO_SEEED_LED_CIRCULAR_LED = "%1 %2 環形發光二級管 管腳 %3 亮燈 %4"
Blockly.Msg.ARDUINO_SEEED_GESTURE = "%1 %2 手勢識別傳感器 識別手勢 %3？"
Blockly.Msg.ARDUINO_SEEED_SPEECH_RECOGNIZER = "%1 %2  語音識別傳感器 管腳 %3 識別語音 %4？"
Blockly.Msg.ARDUINO_FIGURE_OUTPUT = "數字輸出 管腳 %1 設為 %2"
Blockly.Msg.ARDUINO_FIGURE_INPUT = "數字輸入 管腳 %1"
Blockly.Msg.ARDUINO_ANALOG_INPUT = "模擬輸入 管腳 %1"
Blockly.Msg.ARDUINO_ANALOG_OUTPUT = "模擬輸出 管腳 %1 賦值為 %2"
Blockly.Msg.ARDUINO_PULSE_LEN = "脈沖長度 管腳 %1 狀態 %2"
Blockly.Msg.ARDUINO_PULSE_LEN_US = "脈沖長度 管腳 %1 狀態 %2 超時(微秒) %3"
Blockly.Msg.ARDUINO_SERIAL_BAUD_RATE = "串口 波特率 %1"
Blockly.Msg.ARDUINO_SERIAL_PRINT = "串口 寫入文本 %1"
Blockly.Msg.ARDUINO_SERIAL_IS_READABLE = "串口 有數據可讀嗎？"
Blockly.Msg.ARDUINO_SERIAL_READ = "串口 讀取字串"
Blockly.Msg.ARDUINO_DELAY_MS = "延時 毫秒 %1"
Blockly.Msg.ARDUINO_DELAY_US = "延時 微秒 %1"
Blockly.Msg.ARDUINO_SYS_TIME = "系統運行時間 %1"
Blockly.Msg.ARDUINO_KEEP_WAIT = "壹直等待(結束程序)"
Blockly.Msg.ARDUINO_FOR1 = "使用 %1 從 %2 到 %3 長度為 %4"
Blockly.Msg.ARDUINO_FOR2 = "執行 %1"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT = "%1 %2 RGB矩陣 點亮 x:%3 y:%4 %5"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_SHOW_TEXT = "%1 %2 RGB矩陣 顯示字串 %3"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_SHOW_EMOJS = "%1 %2 RGB矩陣 顯示圖案 %3"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT1 = "%1 %2 Otto DIY機器人 %3 步數:%4 時間:%5"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2 = "%1 %2 Otto DIY機器人 %3 步數:%4 時間:%5 方向:%6"
Blockly.Msg.ARDUINO_SETUP_LOOP0 = "初始化 setup"
Blockly.Msg.ARDUINO_SETUP_LOOP2 = "循環 loop"
Blockly.Msg.ARDUINO_REPEAT = "重複當 %1"
Blockly.Msg.ARDUINO_BREAK = "中斷循環"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT0 = "向上"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT1 = "向下"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT2 = "向左"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT3 = "向右"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT4 = "向前"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT5 = "向後"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT6 = "順時針"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT7 = "逆時針"
Blockly.Msg.ARDUINO_SEEED_GESTURE_OPT8 = "揮手"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT0 = "紅"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT1 = "橙"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT2 = "黃"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT3 = "綠"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT4 = "青"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT5 = "藍"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT6 = "紫"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT7 = "粉紅"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT8 = "白"
Blockly.Msg.ARDUINO_GROVE_SERIAL_RGB_LED_MATRIX_ON_POINT_OPT9 = "熄滅"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT1_OPT0 = "前進"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT1_OPT1 = "後退"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT1_OPT2 = "往左"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT1_OPT3 = "往右"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT0 = "停止"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT1 = "跳動"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT2 = "側踢"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT3 = "搖搖腿"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT4 = "上下搖擺"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT5 = "左右搖擺"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT6 = "舞動腳尖"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT7 = "抖動"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT8 = "上下抖動"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT9 = "太空步"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT10 = "月球漫步"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT11 = "搖擺"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT12 = "向右/向前"
Blockly.Msg.ARDUINO_GROVE_OTTO_DIY_ROBOT2_OPT13 = "向左/向後"
Blockly.Msg.ARDUINO_SHIELD_BOT2 = "%1 %2 Shield Bot 小車 循跡傳感器線的位置為 %3"
Blockly.Msg.ARDUINO_SHIELD_BOT2_OPT1 = "中"
Blockly.Msg.ARDUINO_SHIELD_BOT2_OPT2 = "左"
Blockly.Msg.ARDUINO_SHIELD_BOT2_OPT3 = "最左"
Blockly.Msg.ARDUINO_SHIELD_BOT2_OPT4 = "右"
Blockly.Msg.ARDUINO_SHIELD_BOT2_OPT5 = "最右"
Blockly.Msg.ARDUINO_SHIELD_BOT2_OPT6 = "丟失"
Blockly.Msg.ARDUINO_SHIELD_BOT1 = "%1 %2 Shield Bot 小車 %3 %4"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT1 = "前進"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT2 = "後退"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT3 = "往左"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT4 = "往右"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT5 = "停止"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT6 = "低速"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT7 = "中速"
Blockly.Msg.ARDUINO_SHIELD_BOT1_OPT8 = "高速"
Blockly.Msg.CATEGORY_ARDUINO_INIT = "初始化"
Blockly.Msg.CATEGORY_ARDUINO_INPUT = "輸入"
Blockly.Msg.CATEGORY_ARDUINO_OUTPUT = "輸出"
Blockly.Msg.CATEGORY_ARDUINO_SERIAL = "串口"
Blockly.Msg.CATEGORY_ARDUINO_GROVE_IGURE = "Grove 數字"
Blockly.Msg.CATEGORY_ARDUINO_GROVE_ANALOG = "Grove 模擬"
Blockly.Msg.CATEGORY_ARDUINO_GROVE_I2C = "Grove I2C"
Blockly.Msg.CATEGORY_ARDUINO_ROBOT_KIT = "M.A.R.K"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW = "%1 %2 web服務器 %3 %4 顯示 名稱：%5 數值：%6"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT1 = "水分子檢測傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT2 = "超聲波測距傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT3 = "人體紅外傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT4 = "溫濕度傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT5 = "LED燈"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT6 = "振動傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT7 = "電壓分壓器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT8 = "空氣質量傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT9 = "火焰傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_SHOW_OPT10 = "圖像識別傳感器"
Blockly.Msg.ARDUINO_WEBSERVER_INIT = "%1 %2 web服務器 初始化 %3 網絡名稱 %4 密碼 %5"
Blockly.Msg.ARDUINO_WEBSERVER_INIT_OPT1 = "智慧城市"
Blockly.Msg.ARDUINO_COLOR_SENSOR = "%1 %2 顏色識別傳感器 識別到顏色 %3 ？"
Blockly.Msg.ARDUINO_COLOR_SENSOR_OPT1 = "紅"
Blockly.Msg.ARDUINO_COLOR_SENSOR_OPT2 = "綠"
Blockly.Msg.ARDUINO_COLOR_SENSOR_OPT3 = "藍"
Blockly.Msg.ARDUINO_COLOR_SENSOR_OPT4 = "黑"
Blockly.Msg.ARDUINO_COLOR_SENSOR_OPT5 = "白"
Blockly.Msg.ARDUINO_COLOR_SENSOR_OPT6 = "其他"
Blockly.Msg.GROVEZERO_MATH_ITOA_VALUE_MESSAGE0 = "轉字串 %1"
Blockly.Msg.TOOLBOX_EXTENSION_CATEGORY_NAME = "擴展"
Blockly.Msg.ARDUINO_SEEED_VOLTAGE = "%1 %2 電壓分壓器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_QUALITY = "%1 %2 空氣質量傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_WATER_ANALOG = "%1 %2 水分子檢測傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_HUMIDIFIER = "%1 %2 超聲波霧化器 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_SEEED_VIBRATION = "%1 %2 震動傳感器 管腳 %3"
Blockly.Msg.ARDUINO_SEEED_LED_ANALOG = "%1 %2 LED燈 管腳 %3 設為 %4"
Blockly.Msg.ARDUINO_VISION_SENSOR1 = "%1 %2 圖像識別傳感器 識別 球體 %3"
Blockly.Msg.ARDUINO_VISION_SENSOR1_OPT1 = "橙色乒乓球"
Blockly.Msg.ARDUINO_VISION_SENSOR1_OPT2 = "綠色網球"
Blockly.Msg.ARDUINO_VISION_SENSOR2 = "%1 %2 圖像識別傳感器 識別 交通標示卡片 %3"
Blockly.Msg.ARDUINO_VISION_SENSOR3 = "%1 %2 圖像識別傳感器 識別 數字卡片 %3"
Blockly.Msg.ARDUINO_VISION_SENSOR4 = "%1 %2 圖像識別傳感器 識別 圖形卡片 %3"
Blockly.Msg.ARDUINO_VISION_SENSOR4_OPT1 = "對號"
Blockly.Msg.ARDUINO_VISION_SENSOR4_OPT2 = "叉號"
Blockly.Msg.ARDUINO_VISION_SENSOR4_OPT3 = "圓形"
Blockly.Msg.ARDUINO_VISION_SENSOR4_OPT4 = "方形"
Blockly.Msg.ARDUINO_VISION_SENSOR4_OPT5 = "三角形"
Blockly.Msg.ARDUINO_VISION_SENSOR5 = "%1 %2 圖像識別傳感器 識別 人體"
Blockly.Msg.ARDUINO_VISION_SENSOR6 = "%1 %2 圖像識別傳感器 識別 顏色 %3"
Blockly.Msg.ARDUINO_VISION_SENSOR7 = "%1 %2 圖像識別傳感器 獲取識別顏色值"
Blockly.Msg.BUZZER_TONE_LOW = "低"
Blockly.Msg.BUZZER_TONE_MIDDLE = "中"
Blockly.Msg.BUZZER_TONE_HIGH = "高"
Blockly.Msg.BUZZER_SELECTED_PREFIX = "已選："
Blockly.Msg.ARDUINO_LED_STRIP1 = "%1 %2 炫彩RGB LED燈條 管腳 %3 顯示為R值 %4 G值 %5 B值 %6 序號 %7"
Blockly.Msg.ARDUINO_LED_STRIP2 = "%1 %2 炫彩RGB LED燈條 管腳 %3 顯示為R值 %4 G值 %5 B值 %6"
Blockly.Msg.ARDUINO_VISION_SENSOR8 = "%1 %2 圖像識別傳感器 獲取球體 %3 值"
Blockly.Msg.ARDUINO_OLCD1 = "%1 %2 OLCD屏幕 顯示圖案 %3"
Blockly.Msg.ARDUINO_OLCD2 = "%1 %2 OLCD屏幕 顯示字串 %3 第 %4 行，第 %5 列"
Blockly.Msg.ARDUINO_OLCD3 = "%1 %2 OLCD屏幕 清除顯示"
Blockly.Msg.MAIXDUINO_ENENT_WHENSTARTUP = "當啟動時"
Blockly.Msg.MAIXDUINO_DISPLAY_STRING = "顯示 %1 於第 %2 行"
Blockly.Msg.MAIXDUINO_DISPLAY_SET_CIRCLE = "繪制圓形：圓心座標 X%1 Y%2 半徑%3"
Blockly.Msg.MAIXDUINO_DISPLAY_SET_RECTANGLE = "繪制長方形: X1%1 Y1%2 X2%3 Y2%4"
Blockly.Msg.MAIXDUINO_DISPLAY_DRAW_CIRCLE = "%1 %2 繪制圓形區域 %3"
Blockly.Msg.MAIXDUINO_DISPLAY_DRAW_RECTANGLE = "%1 %2 繪制長方形區域 %3"
Blockly.Msg.MAIXDUINO_CAMERA_SET_THRESHOLD = "設定圖像識別 靈敏度為 %1"
Blockly.Msg.MAIXDUINO_CAMERA_TAKE_PICTURE = "拍照: 文件名 %1"
Blockly.Msg.MAIXDUINO_CAMERA_TAKE_VIDEO = "錄像：時間 %1 秒， 文件名 %2"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_BALL = "檢測到圓形"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_BALL_COORD = "檢測到的圓 %1"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_BALL_VALUE = "檢測到的圓訊息"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_RECTANGLE = "檢測到長方形"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_RECTANGLE_COORD = "檢測到的長方形 %1"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_RECTANGLE_VALUE = "檢測到的長方形訊息"
Blockly.Msg.MAIXDUINO_CAMERA_GET_BALL_AVERAGE_COLOR = "%1 %2 球形區域：X座標 %3 Y座標 %4 R值 %5 的平均顏色RGB值"
Blockly.Msg.MAIXDUINO_CAMERA_GET_RECTANGLE_AVERAGE_COLOR = "%1 %2 長方形區域：Xmin座標 %3 Xmax座標 %4 Ymin座標 %5 Ymax座標 %6 的平均顏色RGB值"
Blockly.Msg.MAIXDUINO_CAMERA_INTEREST_AREA_COLOR = "%1 %2 興趣區域 %3 檢測到 %4"
Blockly.Msg.MAIXDUINO_CAMERA_INTEREST_AREA_AVERAGE_COLOR = "%1 %2 興趣區域 %3 的平均顏色RGB值"
Blockly.Msg.MAIXDUINO_SENSING_HOME_ANIMAL_DETECTION = "家庭動物識別結果 概率 > %1 %"
Blockly.Msg.MAIXDUINO_SENSING_HOME_ANIMAL_SEL_DETECTION = "家庭動物 識別結果為 %1 概率 > %2 %"
Blockly.Msg.MAIXDUINO_SENSING_ZOO_ANIMAL_DETECTION = "動物園動物識別結果 概率 > %1 %"
Blockly.Msg.MAIXDUINO_SENSING_ZOO_ANIMAL_SEL_DETECTION = "動物園動物 識別結果為 %1 概率 > %2 %"
Blockly.Msg.MAIXDUINO_SENSING_ORDINARY_OBJECT_DETECTION = "普通物體識別結果 概率 > %1 %"
Blockly.Msg.MAIXDUINO_SENSING_ORDINARY_OBJECT_SEL_DETECTION = "普通物體 識別結果為 %1 概率 > %2 %"
Blockly.Msg.MAIXDUINO_SENSING_NUM_DETECTION = "檢測到的數字結果 概率 > %1 %"
Blockly.Msg.MAIXDUINO_NUM_SEL_DETECTION = "數字 檢測結果為 %1 概率 > %2 %"
Blockly.Msg.MAIXDUINO_NUM_CERTRE_DETECTION = "檢測到的數字 %1 的 %2 概率 > %3 %"
Blockly.Msg.MAIXDUINO_SENSING_TRAFFIC_SIGNS_DETECTION = "檢測到的交通標誌 概率 > %1 %"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_SEL_DETECTION = "交通標誌 檢測結果為 %1 概率 > %2 %"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_CERTRE_DETECTION = "檢測到的交通標誌 %1 的 %2 概率 >%3 %"
Blockly.Msg.MAIXDUINO_INPUT_SYSTEMTIME = "系統運行時間 %1"
Blockly.Msg.MAIXDUINO_CAMERA_R_MAX = "R最大"
Blockly.Msg.MAIXDUINO_CAMERA_R_MIN = "R最小"
Blockly.Msg.MAIXDUINO_CAMERA_SIZE_MAX = "最大"
Blockly.Msg.MAIXDUINO_CAMERA_SIZE_MIN = "最小"
Blockly.Msg.MAIXDUINO_CAMERA_COORD_X = "位置：X座標"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_Y = "Y座標"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_XMIN = "位置：Xmin座標"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_YMIN = "位置：Ymin座標"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_XMAX = "位置：Xmax座標"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_YMAX = "位置：Ymax座標"
Blockly.Msg.MAIXDUINO_CAMERA_R_VALUE = "半徑"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT1 = "紅色"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT2 = "綠色"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT3 = "藍色"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT4 = "黃色"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT5 = "青色"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT6 = "紫色"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT7 = "黑色"
Blockly.Msg.MAIXDUINO_CAMERA_SENSOR_OPT8 = "白色"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT1 = "貓"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT2 = "狗"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT3 = "鳥"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT4 = "刺猬"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT5 = "老鼠"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT6 = "鱷魚"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT7 = "熊"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT8 = "大象"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT9 = "長頸鹿"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT10 = "老虎"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT11 = "蝴蝶"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT12 = "蟑螂"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT13 = "魚"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT14 = "蜥蜴"
Blockly.Msg.MAIXDUINO_SENSING_ANIMAL_OPT15 = "蜘蛛"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT0 = "左轉"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT1 = "右轉"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT2 = "直行"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT3 = "調頭"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT4 = "停車讓行"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT5 = "限速5"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT6 = "限速80"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT7 = "禁止直行"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT8 = "減速讓行"
Blockly.Msg.MAIXDUINO_TRAFFIC_SIGNS_OPT9 = "註意行人"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT1 = "椅子"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT2 = "書籍"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT3 = "杯子"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT4 = "筆"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT5 = "比薩餅"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT6 = "智能手機"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT7 = "炸彈"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT8 = "電腦"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT9 = "人"
Blockly.Msg.MAIXDUINO_SENSING_OBJECT_OPT10 = "背包"
Blockly.Msg.MAIXDUINO_SENSING_COORD_X = "X 座標"
Blockly.Msg.MAIXDUINO_SENSING_COORD_Y = "Y 座標"
Blockly.Msg.MAIXDUINO_LINEPAROL_ANGLE = "%1 %2 巡線 設定線識別顏色為 %3 區域權重 紅區%4%  藍區%5%  綠區%6%"
Blockly.Msg.MAIXDUINO_CAMERA_BALL_AERA = "球形"
Blockly.Msg.MAIXDUINO_CAMERA_RECTANGLE_AERA = "長方形"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_RUN = "M.A.R.K 小車以 %1 %2"
Blockly.Msg.MAIXDUINO_ROBOT_MOTOR_RUN = "M.A.R.K 設定 %1 轉速為 %2 %"
Blockly.Msg.MAIXDUINO_ROBOT_SERVO_RUN = "M.A.R.K 舵機 %1 轉到 %2 度"
Blockly.Msg.MAIXDUINO_ROBOT_STEPPER_SERVO_SETANGLE = "M.A.R.K 設定步進電機步距角為 %1 °"
Blockly.Msg.MAIXDUINO_ROBOT_STEPPER_SERVO_SETROTATESPEED = "M.A.R.K 設定步進電機轉速為 %1 RPM"
Blockly.Msg.MAIXDUINO_ROBOT_STEPPER_SERVO_RUN = "M.A.R.K 步進電機轉動 %1 步"
Blockly.Msg.MAIXDUINO_ROBOT_STEPPER_SERVO_TURN = "M.A.R.K 視覺巡線: 轉彎角度 %1 速度 %2 靈敏度 %3"
Blockly.Msg.CocoRobo_ENENT_WHENSTARTUP = "%1 %2 當教科板 啟動"
Blockly.Msg.CocoRobo_ENENT_WHENACTION = "%1 %2 當按鍵 %3 被 %4 時"
Blockly.Msg.CocoRobo_ENENT_WHENPINVOLTAGE = "%1 %2 當引腳 %3 被 %4 時"
Blockly.Msg.CocoRobo_ENENT_WHENSHARK = "%1 %2 當教科板 被搖晃時"
Blockly.Msg.CocoRobo_ENENT_TILT_DIRECTION = "%1 %2 當教科板 %3 時"
Blockly.Msg.CocoRobo_ENENT_WHENTOUCHKEY = "%1 %2 當觸摸鍵 %3 被 %4 時"
Blockly.Msg.CocoRobo_ENENT_FOR1 = "%1 %2 設定定時器 %3 %4 周期 %5 毫秒"
Blockly.Msg.CocoRobo_ENENT_FOR2 = "執行 %1"
Blockly.Msg.CocoRobo_ENENT_CLEAR_TIMER = "%1 %2 清除 定時器/事件 %3"
Blockly.Msg.CocoRobo_ENENT_TIMER_COUNT = "%1 %2 定時器 %3 的計數值"
Blockly.Msg.CocoRobo_EVENT_WHEN_ACTION = "%1 %2 事件 %3 : 當 %4 時"
Blockly.Msg.CocoRobo_EVENT_CHILD_THREAD = "%1 %2 子線程 %3"
Blockly.Msg.CocoRobo_SYSRESOURES_BUTTON_PRESSED = "%1 %2 按鍵 %3 被按下"
Blockly.Msg.CocoRobo_SYSRESOURES_BUTTON_TOUCH = "%1 %2 按鍵 %3 被觸摸"
Blockly.Msg.CocoRobo_SYSRESOURES_TOUCH_VALUE = "%1 %2 按鍵 %3 觸摸值"
Blockly.Msg.CocoRobo_SYSRESOURES_VOLUME = "%1 %2 聲音值"
Blockly.Msg.CocoRobo_SYSRESOURES_LIGHT = "%1 %2 光線值"
Blockly.Msg.CocoRobo_SYSRESOURES_ACCELERATION = "%1 %2 %3 軸加速度"
Blockly.Msg.CocoRobo_SYSRESOURES_SLOPE = "%1 %2 %3  軸傾斜角"
Blockly.Msg.CocoRobo_SYSRESOURES_SHARKED = "%1 %2 掌控版 被搖晃"
Blockly.Msg.CocoRobo_SYSRESOURES_SLOPE_ANGLE = "%1 %2 掌控版 %3"
Blockly.Msg.CocoRobo_SYSRESOURES_SET_SINGLE_COLOR = "%1 %2 設定 %3 RGB燈顏色為 %4"
Blockly.Msg.CocoRobo_SYSRESOURES_SET_SINGLE_RGB = "%1 %2 設定 %3 RGB燈顏色為 R %4 G %5 B %6"
Blockly.Msg.CocoRobo_SYSRESOURES_SET_ALL_COLOR = "%1 %2 設定所有 RGB燈顏色為 %3"
Blockly.Msg.CocoRobo_SYSRESOURES_SET_ALL_RGB = "%1 %2 設定所有 RGB燈顏色為 R %3 G %4 B %5"
Blockly.Msg.CocoRobo_SYSRESOURES_CLOSE_RGB = "%1 %2 關閉 RGB燈"
Blockly.Msg.CocoRobo_SYSRESOURES_SET_BME280 = "%1 %2 BME280 %3"
Blockly.Msg.CocoRobo_SYSRESOURES_DRAW_CLOCK = "%1 %2 繪制時鐘 x %3 y %4 半徑 %5"
Blockly.Msg.CocoRobo_SYSRESOURES_CLOCK_OPERATE = "%1 %2 %3 時鐘"
Blockly.Msg.CocoRobo_SYSRESOURES_SET_RUN_TIME = "%1 %2 運行時間 %3"
Blockly.Msg.CocoRobo_SYSRESOURES_SET_LOCAL_TIME = "%1 %2 本地時間 %3"
Blockly.Msg.CocoRobo_SYSRESOURES_RESET = "%1 %2 復位"
Blockly.Msg.CocoRobo_SYSRESOURES_MAC_ADDRESS = "%1 %2 MAC地址"
Blockly.Msg.CocoRobo_LOOKS_OLCD = "%1 %2 LCD 屏 %3"
Blockly.Msg.CocoRobo_LOOKS_OLCD_LINE_TEXT = "%1 %2 LCD 屏第 %3 行顯示 %4 模式 %5"
Blockly.Msg.CocoRobo_LOOKS_OLCD_CLEAR_LINE = "%1 %2 LCD 屏 清除第 %3 行"
Blockly.Msg.CocoRobo_LOOKS_DISPLAY_TEXT = "%1 %2 顯示文本 x %3 y %4 內容 %5 模式 %6"
Blockly.Msg.CocoRobo_LOOKS_TRACE_POINT = "%1 %2 描點 x %3 y %4 為 %5"
Blockly.Msg.CocoRobo_LOOKS_PROGRESS = "%1 %2 進度條 x %3 y %4 寬 %5 高 %6 進度 %7"
Blockly.Msg.CocoRobo_LOOKS_COLUMN_STRIP = "%1 %2 柱狀條 %3 x %4 y %5 寬 %6 高 %7 進度 %8"
Blockly.Msg.CocoRobo_LOOKS_DRAW_LINE = "%1 %2 %3 線 x1 %4 y1 %5 到 x2 %6 y2 %7"
Blockly.Msg.CocoRobo_LOOKS_DRAW_FRAME = "%1 %2 %3 邊框 x %4 y %5 寬 %6 高 %7"
Blockly.Msg.CocoRobo_LOOKS_DRAW_ARC_BORDER = "%1 %2 %3 圓角邊框 x %4 y %5 寬 %6 高 %7 半徑 %8"
Blockly.Msg.CocoRobo_LOOKS_DRAW_RECT = "%1 %2 %3 矩形 x %4 y %5 寬 %6 高 %7"
Blockly.Msg.CocoRobo_LOOKS_DRAW_CIRCLE = "%1 %2 %3 %4 圓 x %5 y %6 半徑 %7"
Blockly.Msg.CocoRobo_LOOKS_DRAW_TRIANGLE = "%1 %2 %3 %4 三角形 x %5 y %6 x2 %7 y2 %8 x3 %9 y3 %10"
Blockly.Msg.CocoRobo_LOOKS_DRAW_DISPLAY_PICTURE = "%1 %2 在 x %3 y %4 顯示圖像 %5"
Blockly.Msg.CocoRobo_LOOKS_DRAW_DISPLAY = "%1 %2 在 x %3 y %4 顯示 %5 字體 %6 %7"
Blockly.Msg.CocoRobo_MUSIC_STOP_PLAY = "%1 %2 停止音樂 腳位 %3"
Blockly.Msg.CocoRobo_MUSIC_RESTORE_MUSIC_SET = "%1 %2 恢復音樂設定"
Blockly.Msg.CocoRobo_MUSIC_NOTE_BEAT = "%1 %2 音符 %3 節拍 %4"
Blockly.Msg.CocoRobo_MUSIC_NOTE_BEAT_PIN = "%1 %2 播放音符 音符 %3 節拍 %4 腳位 %5"
Blockly.Msg.CocoRobo_MUSIC_TONE = "%1 %2 音調 %3"
Blockly.Msg.CocoRobo_MUSIC_PLAY_TONE_PIN = "%1 %2 播放音調 音調%3 延時 %4 腳位 %5"
Blockly.Msg.CocoRobo_MUSIC_PLAY_TONE_PIN_PARA = "%1 %2 播放音調 從 %3 到 %4 長度 %5 時長 %6 （毫秒）腳位 %7"
Blockly.Msg.CocoRobo_MUSIC_PLAY_MUSIC_PIN = "%1 %2 播放音樂 %3 等待 %4 循環 %5 腳位 %6"
Blockly.Msg.CocoRobo_MUSIC_SET_PLAY_SPEED = "%1 %2 設定播放速度為 %3 倍"
Blockly.Msg.CocoRobo_MUSIC_SET_BEAT = "%1 %2 設定每壹拍等同 %3 分音符，每分鐘節拍數 %4"
Blockly.Msg.CocoRobo_MUSIC_SET_CURRENT_BEAT = "%1 %2 當前節拍數"
Blockly.Msg.CocoRobo_BUZZER_INIT = "%1 %2 音頻 初始化"
Blockly.Msg.CocoRobo_BUZZER_RELEASE_CACHE = "%1 %2 音頻 釋放緩存"
Blockly.Msg.CocoRobo_BUZZER_SET_VOLUMN = "%1 %2 設定音頻音量 %3"
Blockly.Msg.CocoRobo_BUZZER_SET_ACTION = "%1 %2 音頻 %3"
Blockly.Msg.CocoRobo_BUZZER_PLAY = "%1 %2 音頻 播放 %3"
Blockly.Msg.CocoRobo_BUZZER_VOICE_CONF = "%1 %2 TTS 語音配置 APPID %3 APIKey %4"
Blockly.Msg.CocoRobo_BUZZER_VOICE_PLAY = "%1 %2 TTS 語音播放 %3"
Blockly.Msg.CocoRobo_PIN_GET_VALUE = "%1 %2 讀取引腳 %3 數字值"
Blockly.Msg.CocoRobo_PIN_SET_VALUE = "%1 %2 設定引腳 %3 數字值為 %4"
Blockly.Msg.CocoRobo_PIN_GET_ANALOG_VALUE = "%1 %2 讀取引腳 %3 模擬值"
Blockly.Msg.CocoRobo_PIN_SET_ANALOG_VALUE = "%1 %2 設定引腳 %3 PWM為 %4"
Blockly.Msg.CocoRobo_PIN_SET_SERVO_ANGLE = "%1 %2 設定舵機 %3 角度為 %4"
Blockly.Msg.CocoRobo_PIN_SET_SERVO_PWM_MAXANGLE = "%1 %2 設定舵機 %3 角度為 %4 脈寬從 %5 到 %6 最大角度 %7"
Blockly.Msg.CocoRobo_PIN_SET_PIN_MODE = "%1 %2 設定引腳 %3 為 %4 模式 %5"
Blockly.Msg.CocoRobo_PIN_EXTERNAL_LEVEL_DURATION = "%1 %2 %3 外部 %4 電平持續時間(微秒)"
Blockly.Msg.CocoRobo_PIN_DHT11_VALUE = "%1 %2 DHT11 %3 %4"
Blockly.Msg.CocoRobo_PIN_DHT22_VALUE = "%1 %2 DHT22 %3 %4"
Blockly.Msg.CocoRobo_PIN_INIT_I2C_BAUD_RATE = "%1 %2 初始化I2C 波特率 %3"
Blockly.Msg.CocoRobo_PIN_INIT_I2C_SCL_SDA_BAUD = "%1 %2 初始化I2C SCL %3 SDA %4 波特率 %5"
Blockly.Msg.CocoRobo_PIN_I2C_ADDRESS_WRITE = "%1 %2 I2C地址 %3 寫入 %4"
Blockly.Msg.CocoRobo_PIN_I2C_ADDRESS_GET_BYTES_NUM = "%1 %2 I2C地址 %3 讀取bytes數量 %4"
Blockly.Msg.CocoRobo_PIN_HSCR04_ULTRASONIC_INIT = "%1 %2HCSR04 超聲波初始化 名稱 %3 trigger %4 echo %5"
Blockly.Msg.CocoRobo_PIN_HSCR04_ULTRASONIC_DISTANCE_UNIT = "%1 %2 %3 HCSR04 超聲測距 %4"
Blockly.Msg.CocoRobo_RADIO_ACTION = "%1 %2 %3 無線廣播"
Blockly.Msg.CocoRobo_SET_RADIO_CHANNEL = "%1 %2 設定無線廣播 頻道為 %3"
Blockly.Msg.CocoRobo_SET_RADIO_SEND_MES = "%1 %2 無線廣播 發送 %3"
Blockly.Msg.CocoRobo_RADIO_GET_MES = "%1 %2 無線廣播 接收消息"
Blockly.Msg.CocoRobo_RADIO_GET_MES_FOR1 = "當收到無線廣播消息 %1"
Blockly.Msg.CocoRobo_RADIO_GET_SPECIAL_FOR1 = "當收到特定無線廣播消息 %1"
Blockly.Msg.CocoRobo_WIFI_CONNECT = "%1 %2 連接 Wi-Fi 名稱 %3 密碼 %4"
Blockly.Msg.CocoRobo_WIFI_DISCONNECT = "%1 %2 斷開 Wi-Fi 連接"
Blockly.Msg.CocoRobo_WIFI_CONNECTED = "%1 %2 Wi-Fi 已連接"
Blockly.Msg.CocoRobo_WIFI_ALL_CONF = "%1 %2 所有 Wi-Fi 配置訊息"
Blockly.Msg.CocoRobo_WIFI_CONF_MES = "%1 %2 Wi-Fi 配置訊息 %3"
Blockly.Msg.CocoRobo_WIFI_OPEN_AP_MODE = "%1 %2 開啟 AP模式 名稱 %3 信道 %4"
Blockly.Msg.CocoRobo_WIFI_CLOSE_AP_MODE = "%1 %2 關閉 AP模式"
Blockly.Msg.CocoRobo_WIFI_SYNC_NETWORK_TIME = "%1 %2 同步網絡時間 時區 %3 授時服務器 %4"
Blockly.Msg.CocoRobo_NEOPIXEL_INIT = "%1 %2 燈帶 初始化 %3 腳位 %4 數量 %5"
Blockly.Msg.CocoRobo_NEOPIXEL_CHANNEL_COLOR = "%1 %2 燈帶 %3 %4 號顏色為 %5"
Blockly.Msg.CocoRobo_NEOPIXEL_CHANNEL_RGB = "%1 %2 燈帶 %3 %4 號 紅 %5 綠 %6 藍 %7"
Blockly.Msg.CocoRobo_NEOPIXEL_FULL_LIGHT_COLOR = "%1 %2 燈帶 %3 全亮 顏色 %4"
Blockly.Msg.CocoRobo_NEOPIXEL_FULL_LIGHT_RGB = "%1 %2 燈帶 %3 全亮 紅 %4 綠 %5 藍 %6"
Blockly.Msg.CocoRobo_NEOPIXEL_CLOSE = "%1 %2 燈帶 %3 熄滅"
Blockly.Msg.CocoRobo_NEOPIXEL_RAINBOW_LIGHT_EFFECT = "%1 %2 彩虹燈帶 %3 數量 %4 亮度 %5 偏移 %6"
Blockly.Msg.CocoRobo_NEOPIXEL_SET_WRITE = "%1 %2 燈帶 %3 設定生效"
Blockly.Msg.CocoRobo_CONTROL_FOR1 = "為每個項目 %1 在陣列中"
Blockly.Msg.CocoRobo_OPERATORS_GET_TYPE = "值 %1 的類型"
Blockly.Msg.CocoRobo_OPERATORS_JUDGE_TYPE = "值 %1 的類型為 %2"
Blockly.Msg.CocoRobo_OPERATORS_MOD_INT = "%1 ÷ %2 商的整數部分"
Blockly.Msg.CocoRobo_OPERATORS_KEEP_TWO_DECIMALS = "%1 保留 %2 位小數"
Blockly.Msg.CocoRobo_OPERATORS_LIMIT_RANGE = "限制數字 %1 介於低 %2 至 高 %3"
Blockly.Msg.CocoRobo_OPERATORS_MAPPING_RANGE = "映射 %1 從低 %2 至 %3 到高 %4 至 %5"
Blockly.Msg.CocoRobo_G0_COLOR_LINE_FOLLOWER_POSITION = "%1 %2 識色循跡傳感器 線的位置為 %3"
Blockly.Msg.CocoRobo_G0_COLOR_LINE_FOLLOWER_SEEING = "%1 %2 識色循跡傳感器 檢測到%3 色"
Blockly.Msg.CocoRobo_G0_COLOR_LINE_FOLLOWER_COLOR = "%1 %2 識色循跡傳感器 顏色值"
Blockly.Msg.ARDUINO_GROVE_SERIAL_3ADA15 = "%1 %2 三軸數字加速度（1.5g） %3 軸"
Blockly.Msg.ARDUINO_SEEED_LED_BAR_OPT1 = "亮燈"
Blockly.Msg.ARDUINO_SEEED_LED_BAR_OPT2 = "熄滅"
Blockly.Msg.ARDUINO_SEEED_SPEECH_RECOGNIZER_GETVALUE = "%1 %2  語音識別傳感器 管腳 %3 獲取值"
Blockly.Msg.ARDUINO_SERIAL_STR_TONUMBER = "串口 字串轉數值 %1"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT1 = "紅"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT2 = "黃"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT3 = "綠"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT4 = "青"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT5 = "藍"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT6 = "紫"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT7 = "黑"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT8 = "白"
Blockly.Msg.ARDUINO_VISION_SENSOR6_OPT9 = "其他"
Blockly.Msg.ARDUINO_VISION_SENSOR_OPT1 = "前進"
Blockly.Msg.ARDUINO_VISION_SENSOR_OPT2 = "左轉"
Blockly.Msg.ARDUINO_VISION_SENSOR_OPT3 = "右轉"
Blockly.Msg.ARDUINO_VISION_SENSOR_OPT4 = "掉頭"
Blockly.Msg.ARDUINO_VISION_SENSOR_OPT5 = "P"
Blockly.Msg.ARDUINO_MARK_ROBOT_RUN = "%1 %2 M.A.R.K 小車 %3 %4"
Blockly.Msg.ARDUINO_MARK_ROBOT_MOTOR_RUN = "%1 %2 M.A.R.K 設定電機 %3 轉速為 %4"
Blockly.Msg.ARDUINO_MARK_ROBOT_SERVO_RUN = "%1 %2 M.A.R.K 舵機 %3 轉到 %4"
Blockly.Msg.ARDUINO_NETWORK_SETWIFI = "%1 %2 開始連接無線網絡 %3 密碼 %4"
Blockly.Msg.ARDUINO_NETWORK_STATE = "%1 %2 網絡已連接？"
Blockly.Msg.ARDUINO_SPEECH_RECOGNITION_REC = "%1 %2 識別 %3 語音 %4 秒鐘"
Blockly.Msg.ARDUINO_SPEECH_RECOGNITION_OPT01 = "漢語"
Blockly.Msg.ARDUINO_SPEECH_RECOGNITION_OPT02 = "英語"
Blockly.Msg.ARDUINO_SPEECH_RECOGNITION_RECTEXT = "%1 %2 語音識別出的字串"
Blockly.Msg.ARDUINO_SPEECH_RECOGNITION_TTS = "%1 %2 說 %3"
Blockly.Msg.ARDUINO_AUDIO_RECORD = "%1 %2 錄音 %3 %4"
Blockly.Msg.ARDUINO_AUDIO_STORAGE_OPT01 = "文件"
Blockly.Msg.ARDUINO_AUDIO_STORAGE_OPT02 = "Micro SD"
Blockly.Msg.ARDUINO_AUDIO_STORAGE_OPT03 = "USB"
Blockly.Msg.ARDUINO_AUDIO_STORAGE_OPT04 = "暫存"
Blockly.Msg.ARDUINO_AUDIO_STOP_RECORD = "%1 %2 錄音停止"
Blockly.Msg.ARDUINO_AUDIO_PLAY = "%1 %2 播放音頻 %3 %4"
Blockly.Msg.ARDUINO_AUDIO_PLAY_SOMEONE = "%1 %2 播放第 %3 首曲目"
Blockly.Msg.ARDUINO_AUDIO_PLAY_PREORNEXT = "%1 %2 播放 %3 曲目"
Blockly.Msg.ARDUINO_AUDIO_PLAY_OPT1 = "上壹首"
Blockly.Msg.ARDUINO_AUDIO_PLAY_OPT2 = "下壹首"
Blockly.Msg.ARDUINO_AUDIO_PLAY_ATMODE = "%1 %2 %3 播放曲目"
Blockly.Msg.ARDUINO_AUDIO_PLAY_MODE_OPT1 = "循環"
Blockly.Msg.ARDUINO_AUDIO_PLAY_MODE_OPT2 = "暫停"
Blockly.Msg.ARDUINO_AUDIO_PLAY_MODE_OPT3 = "停止"
Blockly.Msg.ARDUINO_AUDIO_SETVOL = "%1 %2 設定揚聲器音量 %3"
Blockly.Msg.ELFBOT_MAINBOARD_START = "%1 %2 當精靈啟動"
Blockly.Msg.ELFBOT_WHEN_BUTTON_S_PRESSED = "%1 %2 當按下按鈕 S "
Blockly.Msg.ELFBOT_WHEN_LIGHTINTENSITY_LESSTHAN = "%1 %2 當環境光強度 %3 %4"
Blockly.Msg.ELFBOT_WHENGREATERTHAN_TIMER = "%1 %2 當計時器 > %3"
Blockly.Msg.ELFBOT_WHENGREATERTHAN_LOUDNESS = "%1 %2 當響度 %3 %4"
Blockly.Msg.ELFBOT_BUTTONS_ISPRESSED = "%1 %2 精靈 按鈕S被按下？"
Blockly.Msg.ELFBOT_ULTRASONIC_DISTANCE_FROMOBJ = "%1 %2 精靈 前方障礙物距離（mm）"
Blockly.Msg.ELFBOT_ULTRASONIC_ISDETECTED_OBJECT = "%1 %2 精靈 檢測到前方物體？"
Blockly.Msg.ELFBOT_ULTRASONIC_LED_SHOW_COLOR = "%1 %2 精靈 設定超聲波 LED顏色為 %3"
Blockly.Msg.ELFBOT_ULTRASONIC_LED_CRUSHOUT = "%1 %2 精靈 熄滅超聲波 LED"
Blockly.Msg.ELFBOT_ULTRASONIC_WHENDETECTEDOBJECT = "%1 %2 當檢測到前方物體"
Blockly.Msg.ELFBOT_LEDMATRIX_PLOT = "%1 %2 精靈 點亮 x: %3 y: %4"
Blockly.Msg.ELFBOT_LEDMATRIX_UNPLOT = "%1 %2 精靈 熄滅 x: %3 y: %4"
Blockly.Msg.ELFBOT_LEDMATRIX_PLOT_OR_UNPLOT = "%1 %2 精靈 切換點亮或熄滅 x: %3 y: %4"
Blockly.Msg.ELFBOT_LEDMATRIX_ISPLOT = "%1 %2 精靈 x: %3 y: %4 是否被點亮？"
Blockly.Msg.ELFBOT_LEDMATRIX_SHOW_TEXT = "%1 %2 精靈 顯示 %3"
Blockly.Msg.ELFBOT_LEDMATRIX_SHOW_TEXT_UNTILDONE = "%1 %2 精靈 顯示 %3 直到結束"
Blockly.Msg.ELFBOT_LEDMATRIX_SHOW_EMOTICON = "%1 %2 精靈 顯示表情 %3"
Blockly.Msg.ELFBOT_LEDMATRIX_SHOW_EMOTICON_FORDURATION = "%1 %2 精靈 顯示表情 %3 持續 %4 秒"
Blockly.Msg.ELFBOT_LEDMATRIX_SCREEN_CRUSHOUT = "%1 %2 精靈 熄滅屏幕"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION1 = "smile"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION2 = "wink"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION3 = "happy"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION4 = "cute"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION5 = "lovely"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION6 = "expressionless"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION7 = "playful"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION8 = "like1"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION9 = "like2"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION10 = "sniker1"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION11 = "sniker2"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION12 = "bored"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION13 = "serious"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION14 = "sweat"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION15 = "frown"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION16 = "rage"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION17 = "pitiful"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION18 = "wail"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION19 = "cry"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION20 = "daze"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION21 = "caim"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION22 = "angry"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION23 = "thinking"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION24 = "dizziness"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION25 = "tired"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION26 = "sleepy"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION27 = "dream"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION28 = "shocked"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION29 = "strabismus"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION30 = "cool"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION31 = "query"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION32 = "pain"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION33 = "uncomfortable"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION34 = "right"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION35 = "left"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION36 = "forward"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION37 = "backward"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION38 = "hello"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION39 = "bye"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION40 = "oK"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION41 = "good"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION42 = "yes"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION43 = "no"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION44 = "low_energy"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION45 = "meow"
Blockly.Msg.ELFBOT_LEDMATRIX_EMOTICON_VALUE_OPTION46 = "panda"
Blockly.Msg.ELFBOT_LEDMATRIX_SHOW_IMAGE = "%1 %2 精靈 顯示圖案 %3"
Blockly.Msg.ELFBOT_LEDMATRIX_SHOW_IMAGE_DURATION = "%1 %2 精靈 顯示圖案 %3 持續 %4 秒"
Blockly.Msg.ELFBOT_RGBLED_SHOW_EFFECTS_COLOR = "%1 %2 精靈 RGB LED壹直 %3 %4"
Blockly.Msg.ELFBOT_RGBLED_EFFECTS_VALUE_OPTION0 = "亮"
Blockly.Msg.ELFBOT_RGBLED_EFFECTS_VALUE_OPTION1 = "閃爍"
Blockly.Msg.ELFBOT_RGBLED_EFFECTS_VALUE_OPTION2 = "呼吸"
Blockly.Msg.ELFBOT_RGBLED_SHOW_POSITION_COLOR = "%1 %2 精靈 RGB LED 亮起 %3 燈，顏色為 %4"
Blockly.Msg.ELFBOT_RGBLED_POSITION_VALUE_OPTION0 = "全部"
Blockly.Msg.ELFBOT_RGBLED_POSITION_VALUE_OPTION1 = "左"
Blockly.Msg.ELFBOT_RGBLED_POSITION_VALUE_OPTION2 = "右"
Blockly.Msg.ELFBOT_RGBLED_SHOW_POSITION_COLOR_DURATION = "%1 %2 精靈 RGB LED 亮起 %3 燈，顏色為 %4 ，持續 %5秒"
Blockly.Msg.ELFBOT_RGBLED_SHOW_COLOR = "%1 %2 精靈 設定RGB LED顏色為 %3"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION0 = "紅色"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION1 = "綠色"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION2 = "藍色"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION3 = "黃色"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION4 = "青色"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION5 = "紫色"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION6 = "黑色"
Blockly.Msg.ELFBOT_RGBLED_COLOR_VALUE_OPTION7 = "白色"
Blockly.Msg.ELFBOT_RGBLED_CRUSHOUT = "%1 %2 精靈 熄滅RGB LED"
Blockly.Msg.ELFBOT_INFRARED_WHENOVERHEAD = "%1 %2 當檢測到前方懸空"
Blockly.Msg.ELFBOT_INFRARED_LIGHTINTENSITY_VALUE = "%1 %2 精靈 紅外反射光強度"
Blockly.Msg.ELFBOT_INFRARED_DETECTED_ISHEAD = "%1 %2 精靈 檢測到前方懸空？"
Blockly.Msg.ELFBOT_LINEPATROL_WHENDETECTEDCOLORD = "%1 %2 當檢測到的顏色是 %3"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION0 = "紅色"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION1 = "綠色"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION2 = "藍色"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION3 = "黃色"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION4 = "青色"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION5 = "紫色"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION6 = "黑色"
Blockly.Msg.ELFBOT_LINEPATROL_COLOR_VALUE_OPTION7 = "白色"
Blockly.Msg.ELFBOT_LINEPATROL_GREYSCALE = "%1 %2 精靈 灰度值"
Blockly.Msg.ELFBOT_LINEPATROL_DETECTED_COLOR = "%1 %2 精靈 檢測到顏色是 %3 ？"
Blockly.Msg.ELFBOT_LINEPATROL_DETECTED_COLOR_VALUE = "%1 %2 精靈 檢測到的 %3 色值"
Blockly.Msg.ELFBOT_LINEPATROL_LIGHTINTENSITY_VALUE = "%1 %2 精靈 反射光強度"
Blockly.Msg.ELFBOT_SERVO_HEAD_LOOKLEFT = "%1 %2 精靈 頭部向左轉到 %3 度"
Blockly.Msg.ELFBOT_SERVO_HEAD_LOOKRIGHT = "%1 %2 精靈 頭部向右轉到 %3 度"
Blockly.Msg.ELFBOT_SERVO_HEAD_LOOKUP = "%1 %2 精靈 頭部向上轉到 %3 度"
Blockly.Msg.ELFBOT_SERVO_HEAD_LOOKDOWN = "%1 %2 精靈 頭部向下轉到 %3 度"
Blockly.Msg.ELFBOT_SERVO_EAR_TURNFORWARD = "%1 %2 精靈 耳朵向前轉到 %3 度"
Blockly.Msg.ELFBOT_SERVO_EAR_TURNBACKWARD = "%1 %2 精靈 耳朵向後轉到 %3 度"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUN_DIRECTION_POWER = "%1 %2 精靈 %3 以動力 %4 %"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_DIRECTION_VALUE_OPTION0 = "前進"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_DIRECTION_VALUE_OPTION1 = "後退"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_DIRECTION_VALUE_OPTION2 = "左轉"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_DIRECTION_VALUE_OPTION3 = "右轉"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUNFORWORD_POWER_DURATION = "%1 %2 精靈 前進以動力 %3 % 持續 %4 秒"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUNBACKWORD_POWER_DURATION = "%1 %2 精靈 後退以動力 %3 % 持續 %4 秒"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUNLEFT_POWER_DURATION = "%1 %2 精靈 左轉以動力 %3 % 持續 %4 秒"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUNRIGHT_POWER_DURATION = "%1 %2 精靈 右轉以動力 %3 % 持續 %4 秒"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUN_POWER = "%1 %2 精靈 移動左輪以動力 %3 % ，右輪以動力 %4 %"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUNFORWORD_DURATION = "%1 %2 精靈 直線前進持續 %3 秒"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUNBACKWORD_DURATION = "%1 %2 精靈 直線後退持續 %3 秒"
Blockly.Msg.ELFBOT_VEHICLEWHEEL_RUN_STOP = "%1 %2 精靈 停止運動"
Blockly.Msg.ELFBOT_LIGHT_INTENSITY_VALUE = "%1 %2 精靈 環境光強度"
Blockly.Msg.ELFBOT_SOUND_LOUDNESS_VALUE = "%1 %2 精靈 響度"
Blockly.Msg.ELFBOT_SOUND_PLAY = "%1 %2 精靈 播放聲音 %3"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION0 = "hello"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION1 = "miao"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION2 = "bye"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION3 = "hum"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION4 = "laugh"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION5 = "wrong"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION6 = "right"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION7 = "sad"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION8 = "vehicles"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION9 = "yeah"
Blockly.Msg.ELFBOT_SOUND_VALUE_OPTION10 = "powerdown"
Blockly.Msg.ELFBOT_SOUND_PLAY_UNTILDONE = "%1 %2 精靈 播放聲音 %3 直到結束"
Blockly.Msg.ELFBOT_SOUND_STOP_PLAY = "%1 %2 精靈 停止播放聲音"
Blockly.Msg.ELFBOT_SOUND_REST_BEATS = "%1 %2 精靈 休止 %3 拍"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION0 = "1"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION1 = "1/2"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION2 = "1/4"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION3 = "1/8"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION4 = "1/16"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION5 = "2"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION6 = "4"
Blockly.Msg.ELFBOT_SOUND_BEAT_VALUE_OPTION7 = "8"
Blockly.Msg.ELFBOT_SOUND_PLAY_FREQUENCYHZ = "%1 %2 精靈 播放聲音以頻率 %3 赫茲，持續 %4 秒"
Blockly.Msg.ELFBOT_SOUND_CHANGE_VOLUME = "%1 %2 精靈 將音量增加 %3"
Blockly.Msg.ELFBOT_SOUND_SET_VOLUME = "%1 %2 精靈 將音量設定為 %3"
Blockly.Msg.ELFBOT_SOUND_VOLUME = "%1 %2 精靈 音量"
Blockly.Msg.ELFBOT_SOUND_NOTE_BEATS = "%1 %2  精靈 播放音符 %3 以 %4 拍"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT = "%1 %2 顏色識別傳感器 檢測到 %3 色"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_POSITION = "%1 %2 顏色識別傳感器 %3 的位置為 %4"
Blockly.Msg.ELFBOT_LINECOLOR_OPT0 = "紅"
Blockly.Msg.ELFBOT_LINECOLOR_OPT1 = "綠"
Blockly.Msg.ELFBOT_LINECOLOR_OPT2 = "藍"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_BLACK = "黑線"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_WRITE = "白線"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_POSITION_OPT0 = "中"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_POSITION_OPT1 = "右"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_POSITION_OPT2 = "最右"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_POSITION_OPT3 = "左"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_POSITION_OPT4 = "最左"
Blockly.Msg.ELFBOT_LINECOLOR_DETECT_POSITION_OPT5 = "丟失"
Blockly.Msg.MICROBIT_WHEN_START = "%1 %2 當 micro:bit 啟動"
Blockly.Msg.MICROBIT_WHEN_BUTTONPRESSED = "%1 %2 當 %3 被按下"
Blockly.Msg.MICROBIT_BUTTON_VALUE_OPTION0 = "A"
Blockly.Msg.MICROBIT_BUTTON_VALUE_OPTION1 = "B"
Blockly.Msg.MICROBIT_BUTTON_VALUE_OPTION2 = "A+B"
Blockly.Msg.MICROBIT_WHEN_PINSTOUCHED = "%1 %2 當引腳 %3 被接觸"
Blockly.Msg.MICROBIT_PINS_VALUE_OPTION0 = "0"
Blockly.Msg.MICROBIT_PINS_VALUE_OPTION1 = "1"
Blockly.Msg.MICROBIT_PINS_VALUE_OPTION2 = "2"
Blockly.Msg.MICROBIT_WHEN_GESTURESTRIKE = "%1 %2 當姿態 %3"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION0 = "搖晃"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION1 = "向上傾斜"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION2 = "向下傾斜"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION3 = "向左傾斜"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION4 = "向右傾斜"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION5 = "正面朝上"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION6 = "正面朝下"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION7 = "自由落體"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION8 = "3g"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION9 = "6g"
Blockly.Msg.MICROBIT_GESTURE_VALUE_OPTION10 = "5g"
Blockly.Msg.MICROBIT_COMMUCATION_OPEN = "%1 %2 打開無線通訊"
Blockly.Msg.MICROBIT_COMMUCATION_CLOSED = "%1 %2 關閉無線通訊"
Blockly.Msg.MICROBIT_COMMUCATION_RESET = "%1 %2 復位無線通訊"
Blockly.Msg.MICROBIT_COMMUCATION_RECEIVE = "%1 %2 接受無線通訊"
Blockly.Msg.MICROBIT_COMMUCATION_SEND = "%1 %2 發送無線消息 %3"
Blockly.Msg.MICROBIT_COMMUCATION_SETCHANNEL = "%1 %2 設定無線通訊頻道 %3"
Blockly.Msg.MICROBIT_PIN_CONNECTED = "%1 %2 腳位 %3 被接觸"
Blockly.Msg.MICROBIT_PIN_ANALOGQUANTITY = "%1 %2 腳位 %3 模擬量"
Blockly.Msg.MICROBIT_PIN_SET_ANALOGQUANTITY = "%1 %2 設定引腳 %3 模擬量為 %4"
Blockly.Msg.MICROBIT_PIN_NUMBER_INPUT = "%1 %2 腳位 %3 有數字輸入"
Blockly.Msg.MICROBIT_PIN_ANALOG_MAP_TO = "%1 %2 映射 %3 模擬值到 %4 至 %5"
Blockly.Msg.MICROBIT_PIN_ANALOG_READ = "%1 %2 模擬讀取 腳位 %3"
Blockly.Msg.MICROBIT_PIN_ANALOG_WRITE = "%1 %2 向引腳 %3 模擬寫入 %4"
Blockly.Msg.MICROBIT_PIN_ANALOG_SET_PERIOD = "%1 %2 設定引腳 %3 模擬期間為 %4 (us)"
Blockly.Msg.MICROBIT_PIN_DIGITAL_READ = "%1 %2 數字讀取 腳位 %3"
Blockly.Msg.MICROBIT_PIN_DIGITAL_IS = "%1 %2 數字引腳 %3 為 %4"
Blockly.Msg.MICROBIT_PIN_DIGITAL_IS_OPT1 = "高"
Blockly.Msg.MICROBIT_PIN_DIGITAL_IS_OPT2 = "低"
Blockly.Msg.MICROBIT_PIN_DIGITAL_SET_TO = "%1 %2 設定數字引腳 %3 為 %4"
Blockly.Msg.MICROBIT_PIN_I2C_READ = "%1 %2 i2c 讀取 i2c地址 %3 ，格式為 %4 重複 %5"
Blockly.Msg.MICROBIT_PIN_I2C_WRITE = "%1 %2 向 i2c地址 %3 寫入值 %4 ，格式為 %5 重複 %6"
Blockly.Msg.MICROBIT_PIN_I2C_READ_OPT1 = "否"
Blockly.Msg.MICROBIT_PIN_I2C_READ_OPT2 = "是"
Blockly.Msg.MICROBIT_SENSOR_BUTTON_PRESSED = "%1 %2 按鍵 %3 被按下？"
Blockly.Msg.MICROBIT_SENSOR_GESTURE_STRIKE = "%1 %2 姿態是 %3？"
Blockly.Msg.MICROBIT_SENSOR_ACCELERATION = "%1 %2 %3 加速度"
Blockly.Msg.MICROBIT_SENSOR_ACCELERATION_VALUE_OPTION0 = "x軸"
Blockly.Msg.MICROBIT_SENSOR_ACCELERATION_VALUE_OPTION1 = "y軸"
Blockly.Msg.MICROBIT_SENSOR_ACCELERATION_VALUE_OPTION2 = "z軸"
Blockly.Msg.MICROBIT_SENSOR_COMPASSANGLE = "%1 %2 指南針角度"
Blockly.Msg.MICROBIT_SENSOR_COMPASS_MAGNETICDENSITY = "%1 %2 指南針磁場強度"
Blockly.Msg.MICROBIT_SENSOR_CALIBRATE_COMPASS = "%1 %2 校正指南針"
Blockly.Msg.MICROBIT_SENSOR_TEMPERATURE = "%1 %2 溫度"
Blockly.Msg.MICROBIT_SENSOR_RUNNINGTIME = "%1 %2 運行時間"
Blockly.Msg.MICROBIT_SHOW_IMAGE = "%1 %2 顯示圖案 %3"
Blockly.Msg.MICROBIT_SHOW_IMAGEFOR = "%1 %2 顯示圖案 %3 持續 %4 秒"
Blockly.Msg.MICROBIT_SHOW_MIRRORING_IMAGE = "%1 %2 鏡像顯示圖案 %3"
Blockly.Msg.MICROBIT_SHOW_SETIMAGE = "%1 %2 設定圖案 %3 %4 移動 %5"
Blockly.Msg.MICROBIT_SHOW_POSITION_VALUE_OPTION0 = "向左"
Blockly.Msg.MICROBIT_SHOW_POSITION_VALUE_OPTION1 = "向右"
Blockly.Msg.MICROBIT_SHOW_POSITION_VALUE_OPTION2 = "向上"
Blockly.Msg.MICROBIT_SHOW_POSITION_VALUE_OPTION3 = "向下"
Blockly.Msg.MICROBIT_SHOW_TEXT = "%1 %2 顯示 %3"
Blockly.Msg.MICROBIT_SHOW_TEXTUNTIL = "%1 %2 顯示 %3 直到滾動結束"
Blockly.Msg.MICROBIT_SHOW_CLOSE = "%1 %2 熄滅屏幕"
Blockly.Msg.MICROBIT_SHOW_LIGHT = "%1 %2 %3 在座標 x: %4 y: %5"
Blockly.Msg.MICROBIT_SHOW_LIGHT_ACTION_VALUE_OPTION0 = "點亮"
Blockly.Msg.MICROBIT_SHOW_LIGHT_ACTION_VALUE_OPTION1 = "熄滅"
Blockly.Msg.MICROBIT_SHOW_LIGHTON = "%1 %2 設定x: %3 y: %4 的亮度為 %5"
Blockly.Msg.MICROBIT_SHOW_BRIGHTNESS = "%1 %2 獲得 x: %3 y: %4的亮度"
Blockly.Msg.MICROBIT_MUSIC_PLAY = "%1 %2 腳位 %3 播放聲音 %4"
Blockly.Msg.MICROBIT_MUSIC_PLAY_UNTILDONE = "%1 %2 腳位 %3 播放聲音 %4 直到播放結束"
Blockly.Msg.MICROBIT_MUSIC_PLAY_NOTE = "%1 %2 腳位 %3 播放音符 %4 持續 %5"
Blockly.Msg.MICROBIT_MUSIC_CHANGETEMPO = "%1 %2 調整聲音速度（bpm）%3"
Blockly.Msg.MICROBIT_MUSIC_SETTEMPO = "%1 %2 將聲音速度（bpm）設定為 %3"
Blockly.Msg.MICROBIT_MUSIC_TEMPO = "%1 %2 聲音速度（bpm）"
Blockly.Msg.MICROBIT_BITPLAYER_KEY_IS_PRESSED = "%1 %2 BitPlayer: 當按鍵 %3 正在被按下"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK = "%1 %2 BitPlayer: 搖桿被推向 %3"
Blockly.Msg.MICROBIT_BITPLAYER_VIBRATION = "%1 %2 BitPlayer: 震動 %3"
Blockly.Msg.MICROBIT_BITPLAYER_VIBRATION_OPT1 = "開"
Blockly.Msg.MICROBIT_BITPLAYER_VIBRATION_OPT2 = "關"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT1 = "左上"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT2 = "上"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT3 = "右上"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT4 = "左"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT5 = "中"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT6 = "右"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT7 = "左下"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT8 = "下"
Blockly.Msg.MICROBIT_BITPLAYER_JOYSTICK_OPT9 = "右下"
Blockly.Msg.MICROBIT_BITWEAR_VIBRATION = "%1 %2 BitWear: 震動 %3"
Blockly.Msg.MICROBIT_BITWEAR_SET_LED_COLOR = "%1 %2 BitWear: 設定LED燈顏色 %3"
Blockly.Msg.MICROBIT_BITMAKER_SET_LED_COLOR = "%1 %2 BitMaker: 設定LED燈 %3 顏色 %4"
Blockly.Msg.MICROBIT_BITCAR_MOVE = "%1 %2 BitCar: 左輪動力 %3 %，右輪動力 %4 %"
Blockly.Msg.MICROBIT_BITCAR_STOP = "%1 %2 BitCar: 停止"
Blockly.Msg.MICROBIT_BITCAR_STANDUP_STILL = "%1 %2 BitCar: 以速度 %3 %站立，沖刺 %4 (ms)"
Blockly.Msg.MICROBIT_BITCAR_LINE_UNDER_SENSOR = "%1 %2 BitCar: 黑線在 %3 傳感器下方"
Blockly.Msg.MICROBIT_BITCAR_LINE_UNDER_SENSOR_OPT1 = "左側"
Blockly.Msg.MICROBIT_BITCAR_LINE_UNDER_SENSOR_OPT2 = "右側"
Blockly.Msg.MICROBIT_BITCAR_LINE_FOLLOW_AT_SPEED = "%1 %2 BitCar: 以 %3 % 速度巡線"
Blockly.Msg.MICROBIT_GROVE_ONE_MINI_FAN_SET_SPEED = "%1 %2 迷妳風扇 %3 ：設定轉速為 %4 %"
Blockly.Msg.MICROBIT_GROVE_ONE_SERVO_SET_ANGLE = "%1 %2 舵機 %3 ：設定角度為 %4 °"
Blockly.Msg.MICROBIT_GROVE_ONE_ULTRASONIC_GET_DISTANCE = "%1 %2 超聲波測距傳感器 %3 ：距離 %4"
Blockly.Msg.MICROBIT_GROVE_ONE_ULTRASONIC_GET_DISTANCE_OPT1 = "厘米"
Blockly.Msg.MICROBIT_GROVE_ONE_ULTRASONIC_GET_DISTANCE_OPT2 = "英尺"
Blockly.Msg.CATEGORY_COMMON = "常用"
Blockly.Msg.CATEGORY_SYSTEM = "系統資源"
Blockly.Msg.CATEGORY_SHOW = "顯示"
Blockly.Msg.CATEGORY_MUSIC = "音樂"
Blockly.Msg.CATEGORY_AUDIO = "音頻"
Blockly.Msg.CATEGORY_PIN = "腳位"
Blockly.Msg.CATEGORY_RADIO = "無線廣播"
Blockly.Msg.CATEGORY_DISPLAY = "顯示"
Blockly.Msg.CATEGORY_LIGHTING = "燈光"
Blockly.Msg.CATEGORY_ACTION = "動作"
Blockly.Msg.CATEGORY_SENSOR = "感知"
Blockly.Msg.CATEGORY_WIRELESS = "無線通訊"
Blockly.Msg.CATEGORY_ADDONS = "擴展板"
Blockly.Msg.CATEGORY_GROVE_ONE = "Grove One"
Blockly.Msg.CATEGORY_DISPLAY1 = "顯示"
Blockly.Msg.CATEGORY_MACHINE_VISION = "圖像識別"
Blockly.Msg.CATEGORY_CNN_MODELS = "模型預測"
Blockly.Msg.CATEGORY_MAXIDUINO_SYSTEM = "系統"
Blockly.Msg.CATEGORY_START = "初始化"
Blockly.Msg.CATEGORY_GROVE_INPUT = "Grove 輸入"
Blockly.Msg.CATEGORY_GROVE_OUTPUT = "Grove 輸出"
Blockly.Msg.CATEGORY_MAIXDUINO_GROVE = "Grove"
Blockly.Msg.SNAPSHOOT = "快照"
Blockly.Msg.MAIXDUINO_ENENT_DELAY = "等待 %1 %2"
Blockly.Msg.MAIXDUINO_ENENT_DELAY_UNIT_MS = "毫秒"
Blockly.Msg.MAIXDUINO_ENENT_DELAY_UNIT_US = "微秒"
Blockly.Msg.MAIXDUINO_ENENT_RUNTIME = "運行時間 %1"
Blockly.Msg.MAIXDUINO_DISPLAY_ORIENTATION = "設定屏幕方向為 %1"
Blockly.Msg.MAIXDUINO_DISPLAY_ORIENTATION_NORMAL = "正常"
Blockly.Msg.MAIXDUINO_DISPLAY_ORIENTATION_ROTATE = "翻轉"
Blockly.Msg.MAIXDUINO_DISPLAY_STRING_AT_POSITION = "顯示 %1 於 X%2 Y%3"
Blockly.Msg.MAIXDUINO_DISPLAY_DRAW_RECTANGLE_WH = "繪制長方形: 長%1 寬%2 中心座標 X%3 Y%4"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_BALL_AT_SIZE_COLOR = "檢測到 %1 圓形"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_BALL_RGB = "檢測到的圓RGB值"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_RECTANGLE_AT_SIZE_COLOR = "檢測到 %1 長方形"
Blockly.Msg.MAIXDUINO_CAMERA_DETECTION_RECTANGLE_RGB = "檢測到的長方形RGB值"
Blockly.Msg.MAIXDUINO_CAMERA_COLORLINE_SETCOLOR = "設定線識別顏色為 %1"
Blockly.Msg.MAIXDUINO_CAMERA_COLORLINE_SETWEIGHT = "設定線識別區域權重: A區 %1% B區 %2% C區 %3%"
Blockly.Msg.MAIXDUINO_CAMERA_COLORLINE_TURNANGLE = "轉彎角度"
Blockly.Msg.MAIXDUINO_SEEED_LINE_FINDER = "%1 %2 腳位 %3 巡線傳感器檢測到 %4"
Blockly.Msg.MAIXDUINO_FIGURE_OUTPUT = "向 數字引腳 %1 寫入值 %2"
Blockly.Msg.MAIXDUINO_FIGURE_INPUT = "數字讀取 腳位 %1"
Blockly.Msg.MAIXDUINO_ANALOG_INPUT = "模擬輸入 管腳 %1"
Blockly.Msg.MAIXDUINO_ANALOG_OUTPUT = "向 模擬引腳 %1 寫入值 %2"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_X = "X座標"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_W = "長"
Blockly.Msg.MAIXDUINO_CAMERA_COORDP_H = "寬"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_OPT1 = "前進"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_OPT2 = "後退"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_OPT3 = "左轉"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_OPT4 = "右轉"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_OPT6 = "慢速"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_OPT7 = "中速"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_OPT8 = "全速"
Blockly.Msg.MAIXDUINO_ROBOT_MARK_STOP = "M.A.R.K 小車停止運動"
Blockly.Msg.MAIXDUINO_ROBOT_MOTOR_RUN_0PT1 = "左輪"
Blockly.Msg.MAIXDUINO_ROBOT_MOTOR_RUN_0PT2 = "右輪"
Blockly.Msg.MAIXDUINO_GROVE_BUTTON_ISPRESSED = "%1 %2 腳位 %3 按鍵開關正在被按下？"
Blockly.Msg.MAIXDUINO_GROVE_ULT_DISTANCE = "%1 %2 腳位 %3 超聲波測距傳感器 距離(cm)"
Blockly.Msg.MAIXDUINO_GROVE_RGBLED_STRIP_DISPALY = "%1 %2 腳位 %3 RGB 燈條 %4 燈亮 %5"
Blockly.Msg.MAIXDUINO_GROVE_RGBLED_STRIP_DISPALY1 = "%1 %2 腳位 %3 RGB 燈條 %4 R %5 G %6 B %7"
Blockly.Msg.MAIXDUINO_GROVE_RGBLED_STRIP_CLOSED = "%1 %2 腳位 %3 RGB 燈條 熄滅"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_SETVOL = "M.A.R.K. 揚聲器 設定音量為 %1 %"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_PLAYNOTE = "M.A.R.K. 揚聲器 播放音調 %1 %2 拍"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_PAUSE = "M.A.R.K. 揚聲器 停頓 %1 拍"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT0 = "1"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT1 = "1/2"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT2 = "1/4"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT3 = "1/8"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT4 = "1/16"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT5 = "2"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT6 = "4"
Blockly.Msg.MAIXDUINO_ROBOT_SPEAKER_BEAT_OPT7 = "8"
Blockly.Msg.MAIXDUINO_ROBOT_HEAD_LIGHTS_SHOW = "M.A.R.K %1 車頭燈亮 %2"
Blockly.Msg.MAIXDUINO_ROBOT_TAIL_LIGHTS_SHOW = "M.A.R.K. 尾燈 %1 亮 %2 %3 %4 "
Blockly.Msg.MAIXDUINO_ROBOT_LIGHTS_CRUSHOUT = "M.A.R.K. %1 車頭燈熄滅"
Blockly.Msg.MAIXDUINO_ROBOT_HEAD_LIGHTS_OPT01 = "左"
Blockly.Msg.MAIXDUINO_ROBOT_HEAD_LIGHTS_OPT02 = "右"
Blockly.Msg.MAIXDUINO_ROBOT_TAIL_LIGHTS_OPT01 = "頂部"
Blockly.Msg.MAIXDUINO_ROBOT_TAIL_LIGHTS_OPT02 = "中間"
Blockly.Msg.MAIXDUINO_ROBOT_TAIL_LIGHTS_OPT03 = "尾部"
Blockly.Msg.MAIXDUINO_ROBOT_LIGHTS_OPT01 = "全部"
Blockly.Msg.MAIXDUINO_ROBOT_LIGHTS_OPT02 = "前"
Blockly.Msg.MAIXDUINO_ROBOT_LIGHTS_OPT03 = "尾"
Blockly.Msg.CocoRobo_SYSRESOURES_SLOPE_OPT1 = "向前傾斜"
Blockly.Msg.CocoRobo_SYSRESOURES_SLOPE_OPT2 = "向後傾斜"
Blockly.Msg.CocoRobo_SYSRESOURES_SLOPE_OPT3 = "向左傾斜"
Blockly.Msg.CocoRobo_SYSRESOURES_SLOPE_OPT4 = "向右傾斜"
Blockly.Msg.CocoRobo_SYSRESOURES_BME280_OPT1 = "溫度"
Blockly.Msg.CocoRobo_SYSRESOURES_BME280_OPT2 = "濕度"
Blockly.Msg.CocoRobo_SYSRESOURES_BME280_OPT3 = "氣壓"
Blockly.Msg.CocoRobo_SYSRESOURES_OPERATE_OPT1 = "刷新"
Blockly.Msg.CocoRobo_SYSRESOURES_OPERATE_OPT2 = "刪除"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT0 = "清空"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT1 = "年"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT2 = "月"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT3 = "日"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT4 = "時"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT5 = "分"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT6 = "秒"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT7 = "星期數"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT8 = "天數"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT9 = "毫秒"
Blockly.Msg.CocoRobo_SYSRESOURES_TIME_OPT10 = "微秒"
Blockly.Msg.CocoRobo_PIN_OPT = "default"
Blockly.Msg.CocoRobo_PIN_OPT0 = "P0"
Blockly.Msg.CocoRobo_PIN_OPT1 = "P1"
Blockly.Msg.CocoRobo_PIN_OPT2 = "P2"
Blockly.Msg.CocoRobo_PIN_OPT3 = "P3(EXT)"
Blockly.Msg.CocoRobo_PIN_OPT4 = "P4(light)"
Blockly.Msg.CocoRobo_PIN_OPT6 = "P6(buzzer)"
Blockly.Msg.CocoRobo_PIN_OPT7 = "P7(RGB)"
Blockly.Msg.CocoRobo_PIN_OPT8 = "P8"
Blockly.Msg.CocoRobo_PIN_OPT9 = "P9"
Blockly.Msg.CocoRobo_PIN_OPT10 = "P10(sound)"
Blockly.Msg.CocoRobo_PIN_OPT13 = "P13"
Blockly.Msg.CocoRobo_PIN_OPT14 = "P14"
Blockly.Msg.CocoRobo_PIN_OPT15 = "P15"
Blockly.Msg.CocoRobo_PIN_OPT16 = "P16"
Blockly.Msg.CocoRobo_PIN_OPT19 = "P19(LCD)"
Blockly.Msg.CocoRobo_PIN_OPT20 = "P20(LCD)"
Blockly.Msg.CocoRobo_PIN_VOLTAGE_OPT1 = "高"
Blockly.Msg.CocoRobo_PIN_VOLTAGE_OPT2 = "低"
Blockly.Msg.CocoRobo_PIN_MODE_OPT1 = "無上下拉"
Blockly.Msg.CocoRobo_PIN_MODE_OPT2 = "上拉"
Blockly.Msg.CocoRobo_PIN_MODE_OPT3 = "下拉"
Blockly.Msg.CocoRobo_PIN_STATYS_OPT1 = "輸入"
Blockly.Msg.CocoRobo_PIN_STATYS_OPT2 = "推挽輸出"
Blockly.Msg.CocoRobo_PIN_STATYS_OPT3 = "開漏輸出"
Blockly.Msg.CocoRobo_LOOKS_OLCD_OPT1 = "清空"
Blockly.Msg.CocoRobo_LOOKS_OLCD_OPT2 = "全亮"
Blockly.Msg.CocoRobo_LOOKS_OLCD_OPT3 = "黑底"
Blockly.Msg.CocoRobo_LOOKS_OLCD_OPT4 = "白底"
Blockly.Msg.CocoRobo_EVENT_ACTION_OPT1 = "按下"
Blockly.Msg.CocoRobo_EVENT_ACTION_OPT2 = "松開"
Blockly.Msg.CocoRobo_EVENT_ACTION_OPT3 = "觸摸"
Blockly.Msg.CocoRobo_EVENT_ACTION_OPT4 = "釋放"
Blockly.Msg.CocoRobo_EVENT_ACTION_OPT5 = "重複執行"
Blockly.Msg.CocoRobo_EVENT_ACTION_OPT6 = "延時執行"
Blockly.Msg.CocoRobo_MUSIC_ACTION_OPT1 = "打開"
Blockly.Msg.CocoRobo_MUSIC_ACTION_OPT2 = "關閉"
Blockly.Msg.CocoRobo_MUSIC_ACTION_OPT3 = "暫停"
Blockly.Msg.CocoRobo_MUSIC_ACTION_OPT4 = "繼續播放"
Blockly.Msg.CocoRobo_MUSIC_ACTION_OPT5 = "停止"
Blockly.Msg.CocoRobo_EVENT_VOLTAGE_OPT1 = "↗從低到高"
Blockly.Msg.CocoRobo_EVENT_VOLTAGE_OPT2 = "↘從高到低"
Blockly.Msg.CocoRobo_LOOKS_MODE_OPT1 = "普通"
Blockly.Msg.CocoRobo_LOOKS_MODE_OPT2 = "反轉"
Blockly.Msg.CocoRobo_LOOKS_MODE_OPT3 = "透明"
Blockly.Msg.CocoRobo_LOOKS_MODE_OPT4 = "XOR"
Blockly.Msg.CocoRobo_LOOKS_LIGHT_OPT1 = "亮"
Blockly.Msg.CocoRobo_LOOKS_LIGHT_OPT2 = "暗"
Blockly.Msg.CocoRobo_LOOKS_DIRECTION_OPT1 = "垂直"
Blockly.Msg.CocoRobo_LOOKS_DIRECTION_OPT2 = "水平"
Blockly.Msg.CocoRobo_OPERATORS_JUDGE_OPT1 = "是偶數"
Blockly.Msg.CocoRobo_OPERATORS_JUDGE_OPT2 = "是奇數"
Blockly.Msg.CocoRobo_OPERATORS_JUDGE_OPT3 = "是整數"
Blockly.Msg.CocoRobo_OPERATORS_JUDGE_OPT4 = "為正"
Blockly.Msg.CocoRobo_OPERATORS_JUDGE_OPT5 = "為負"
Blockly.Msg.CocoRobo_OPERATORS_JUDGE_OPT6 = "可被整除"
Blockly.Msg.CocoRobo_LOOKS_DRAW_OPT1 = "繪制"
Blockly.Msg.CocoRobo_LOOKS_DRAW_OPT2 = "擦除"
Blockly.Msg.CocoRobo_LOOKS_CIRCLE_OPT1 = "空心"
Blockly.Msg.CocoRobo_LOOKS_CIRCLE_OPT2 = "實心"
Blockly.Msg.CocoRobo_LOOKS_FONT_OPT1 = "不換行"
Blockly.Msg.CocoRobo_LOOKS_FONT_OPT2 = "自動換行"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT1 = "心型"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT2 = "心型(小)"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT3 = "高興"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT4 = "笑臉"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT5 = "傷心"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT6 = "困惑"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT7 = "生氣"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT8 = "睡著"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT9 = "驚訝"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT10 = "愚蠢"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT11 = "極妙"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT12 = "無聊"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT13 = "石頭"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT14 = "石頭(小)"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT15 = "布"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT16 = "布(小)"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT17 = "剪刀"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT18 = "剪刀(小)"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT19 = "Expressions/Big smile.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT20 = "Expressions/Heart large.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT21 = "Expressions/Heart small.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT22 = "Expressions/Mouth 1 open.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT23 = "Expressions/Mouth 1 shut.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT24 = "Expressions/Mouth 2 open.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT25 = "Expressions/Mouth 2 shut.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT26 = "Expressions/Sad.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT27 = "Expressions/Sick.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT28 = "Expressions/Smile.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT29 = "Expressions/Swearing.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT30 = "Expressions/Talking.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT31 = "Expressions/Wink.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT32 = "Expressions/ZZZ.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT33 = "Eyes/Angry.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT34 = "Eyes/Awake.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT35 = "Eyes/Black eye.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT36 = "Eyes/Bottom left.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT37 = "Eyes/Bottom right.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT38 = "Eyes/Crazy 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT39 = "Eyes/Crazy 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT40 = "Eyes/Disappointed.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT41 = "Eyes/Dizzy.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT42 = "Eyes/Down.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT43 = "Eyes/Evil.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT44 = "Eyes/Hurt.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT45 = "Eyes/Knocked out.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT46 = "Eyes/Love.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT47 = "Eyes/Middle left.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT48 = "Eyes/Middle right.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT49 = "Eyes/Neutral.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT50 = "Eyes/Nuclear.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT51 = "Eyes/Pinch left.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT52 = "Eyes/Pinch middle.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT53 = "Eyes/Pinch right.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT54 = "Eyes/Tear.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT55 = "Eyes/Tired left.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT56 = "Eyes/Tired middle.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT57 = "Eyes/Tired right.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT58 = "Eyes/Toxic.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT59 = "Eyes/Up.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT60 = "Eyes/Winking.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT61 = "Information/Accept.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT62 = "Information/Backward.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT63 = "Information/Decline.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT64 = "Information/Forward.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT65 = "Information/Left.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT66 = "Information/No go.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT67 = "Information/Question mark.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT68 = "Information/Right.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT69 = "Information/Stop 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT70 = "Information/Stop 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT71 = "Information/Thumbs down.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT72 = "Information/Thumbs up.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT73 = "Information/Warning.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT74 = "Objects/Bomb.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT75 = "Objects/Boom.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT76 = "Objects/Fire.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT77 = "Objects/Flowers.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT78 = "Objects/Forest.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT79 = "Objects/Light off.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT80 = "Objects/Light on.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT81 = "Objects/Lightning.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT82 = "Objects/Night.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT83 = "Objects/Pirate.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT84 = "Objects/Snow.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT85 = "Objects/Target.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT86 = "Progress/Bar 0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT87 = "Progress/Bar 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT88 = "Progress/Bar 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT89 = "Progress/Bar 3.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT90 = "Progress/Bar 4.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT91 = "Progress/Dial 0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT92 = "Progress/Dial 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT93 = "Progress/Dial 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT94 = "Progress/Dial 3.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT95 = "Progress/Dial 4.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT96 = "Progress/Dots 0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT97 = "Progress/Dots 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT98 = "Progress/Dots 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT99 = "Progress/Dots 3.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT100 = "Progress/Hourglass 0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT101 = "Progress/Hourglass 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT102 = "Progress/Hourglass 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT103 = "Progress/Timer 0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT104 = "Progress/Timer 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT105 = "Progress/Timer 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT106 = "Progress/Timer 3.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT107 = "Progress/Timer 4.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT108 = "Progress/Water level 0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT109 = "Progress/Water level 1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT110 = "Progress/Water level 2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT111 = "Progress/Water level 3.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT112 = "System/Accept_1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT113 = "System/Accept_2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT114 = "System/Alert.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT115 = "System/Box.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT116 = "System/Busy_0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT117 = "System/Busy_1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT118 = "System/Decline_1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT119 = "System/Decline_2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT120 = "System/Dot_empty.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT121 = "System/Dot_full.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT122 = "System/Play.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT123 = "System/Slider_0.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT124 = "System/Slider_1.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT125 = "System/Slider_2.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT126 = "System/Slider_3.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT127 = "System/Slider_4.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT128 = "System/Slider_5.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT129 = "System/Slider_6.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT130 = "System/Slider_7.pbm"
Blockly.Msg.CocoRobo_LOOKS_EXPRESSION_OPT131 = "System/Slider_8.pbm"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT1 = "仿數碼管11像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT2 = "仿數碼管16像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT3 = "仿數碼管21像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT4 = "仿數碼管30像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT5 = "仿數碼管44像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT6 = "仿數碼管斜體 30像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT7 = "仿數碼管斜體 42像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT8 = "DejaVu Sans Mono 12像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT9 = "DejaVu Sans Mono 16像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT10 = "DejaVu Sans Mono 21像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT11 = "DejaVu Sans Mono 黑體 12像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT12 = "DejaVu Sans Mono 黑體 16像素"
Blockly.Msg.CocoRobo_LOOKS_TUBE_OPT13 = "DejaVu Sans Mono 黑體 21像素"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT1 = "東壹區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT2 = "東二區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT3 = "東三區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT4 = "東四區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT5 = "東五區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT6 = "東六區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT7 = "東七區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT8 = "東八區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT9 = "東九區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT10 = "東十區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT11 = "東十壹區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT12 = "東十二區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT13 = "西壹區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT14 = "西二區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT15 = "西三區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT16 = "西四區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT17 = "西五區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT18 = "西六區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT19 = "西七區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT20 = "西八區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT21 = "西九區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT22 = "西十區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT23 = "西十壹區"
Blockly.Msg.CocoRobo_WIFI_ZONE_OPT24 = "西十二區"
Blockly.Msg.GROVE_JOINT_SETUP = "初始化 setup"
Blockly.Msg.GROVE_JOINT_SETUP_LOOP = "循環 loop"
Blockly.Msg.GROVE_JOINT_INPUT_HUMITURE = "%1 %2 溫濕度傳感器 %3"
Blockly.Msg.GROVE_JOINT_INPUT_INFRARED = "%1 %2 紅外接近傳感器"
Blockly.Msg.GROVE_JOINT_INPUT_MAGNESWITCH = "%1 %2 磁力開關"
Blockly.Msg.GROVE_JOINT_INPUT_ULTRASONIC = "%1 %2 超聲波測距傳感器"
Blockly.Msg.GROVE_JOINT_INPUT_LIGHT = "%1 %2 光線傳感器"
Blockly.Msg.GROVE_JOINT_INPUT_SLIDESWITCH = "%1 %2 滑動電位開關"
Blockly.Msg.GROVE_JOINT_INPUT_INCLINE = "%1 %2 傾斜傳感器"
Blockly.Msg.GROVE_JOINT_INPUT_TOUCH = "%1 %2 觸摸傳感器"
Blockly.Msg.GROVE_JOINT_INPUT_NOISE = "%1 %2 噪音傳感器"
Blockly.Msg.GROVE_JOINT_INPUT_SOILHUMIDITY = "%1 %2 土壤濕度傳感器"
Blockly.Msg.GROVE_JOINT_INPUT_SHAFTSPEED = "%1 %2 三軸數字加速度 %3"
Blockly.Msg.GROVE_JOINT_INPUT_MULTICHANNEDL_TOUCH = "%1 %2 多通道觸摸傳感器 通道 %3"
Blockly.Msg.GROVE_JOINT_OUTPUT_MINIMOTOR_RUN = "%1 %2 迷妳電機驅動板 電機# %3 轉速 %4"
Blockly.Msg.GROVE_JOINT_OUTPUT_FOURDIGIT_TUBE_DISPLAY = "%1 %2 四位數碼顯示管 顯示為 %3"
Blockly.Msg.GROVE_JOINT_OUTPUT_LEDBOARD_SHOW = "%1 %2 LED驅動板 設為 %3"
Blockly.Msg.GROVE_JOINT_OUTPUT_RGBLED_SHOW = "%1 %2 全彩RGB LED燈顯示為紅 %3 綠 %4 藍 %5"
Blockly.Msg.GROVE_JOINT_OUTPUT_SPEAKER_NOTEBEAT = "%1 %2 揚聲器 音符 %3"
Blockly.Msg.GROVE_JOINT_OUTPUT_SERVO_TRUNANGLE = "%1 %2 舵機 角度(0-180) %3"
Blockly.Msg.GROVE_JOINT_OUTPUT_BUZZER_PLAY = "%1 %2 蜂鳴器 設為 %3"
Blockly.Msg.GROVE_JOINT_OUTPUT_MOTOR_RUN = "%1 %2 震動馬達 設為 %3"
Blockly.Msg.GROVE_JOINT_OUTPUT_DCMOTOR_RUN = "%1 %2 直流電機驅動板 設為 %3"
Blockly.Msg.GROVE_JOINT_INPUT_HUMITURE_OPT01 = "溫度"
Blockly.Msg.GROVE_JOINT_INPUT_HUMITURE_OPT02 = "濕度"
Blockly.Msg.GROVE_JOINT_INPUT_LEVEL_HIGH = "高電平"
Blockly.Msg.GROVE_JOINT_INPUT_LEVEL_LOW = "低電平"


Blockly.Categories = {};
Blockly.Categories.motion = "motion"
Blockly.Categories.looks = "looks"
Blockly.Categories.sound = "sounds"
Blockly.Categories.pen = "pen"
Blockly.Categories.data = "data"
Blockly.Categories.dataLists = "data-lists"
Blockly.Categories.event = "events"
Blockly.Categories.control = "control"
Blockly.Categories.sensing = "sensing"
Blockly.Categories.operators = "operators"
Blockly.Categories.more = "more"

Blockly.Msg.ESP32BUTTON = "當按鈕";
Blockly.Msg.ESP32IS = "是";
Blockly.Msg.ESP32PRESSED = "按下時";
Blockly.Msg.ESP32RELEASED = "鬆開時";
Blockly.Msg.ESP32DIALER_LEFT = "左側";
Blockly.Msg.ESP32DIALER_MIDDLE = "中間";
Blockly.Msg.ESP32DIALER_RIGHT = "右側";
Blockly.Msg.ESP32DIALSWITCH = "當撥盤";
Blockly.Msg.ESP32TURN = "設定";
Blockly.Msg.ESP32LED = "";
Blockly.Msg.ESP32LED_MONO_TEXT_NO = "第";
Blockly.Msg.ESP32LED_MONO_TEXT_AFTER = "颗 LED 燈";
Blockly.Msg.ESP32LED_BLUE = "藍燈";
Blockly.Msg.ESP32LED_RED = "紅燈";
Blockly.Msg.ESP32LED_TURNON = "點亮";
Blockly.Msg.ESP32LED_TURNOFF = "關閉";

Blockly.Msg.ESP32LED_CORD_DRAWPIXEL_LIGHTUP = "點亮";
Blockly.Msg.ESP32LED_CORD_DRAWPIXEL_LIGHTOFF = "熄滅";
Blockly.Msg.ESP32LED_CORD_DRAWPIXEL_LIGHT_INIT_TEXT = "位於（第";
Blockly.Msg.ESP32LED_CORD_DRAWPIXEL_LIGHT_MIDDLE_TEXT = "欄，第";
Blockly.Msg.ESP32LED_CORD_DRAWPIXEL_LIGHT_END_TEXT = "列）的 LED 燈";

Blockly.Msg.ESP32TURNOBAF = "蜂鳴器";
Blockly.Msg.ESP32TURNOB = "關閉蜂鳴器";
Blockly.Msg.ESP32TA = "當觸摸區域";
Blockly.Msg.ESP32_TOUCHED = "被觸摸時";
Blockly.Msg.ESP32_UNTOUCHED = "未被觸摸時";
Blockly.Msg.ESP32_READ = "獲取觸摸區域";
Blockly.Msg.ESP32_READ_VALUE = "的電容變化數值";
Blockly.Msg.ESP32_ENV_GET_TEXT = "獲取";



Blockly.Msg.LCDINIT = "LCD螢幕初始化"
Blockly.Msg.LCDINIT_R = "設定螢幕旋轉"
Blockly.Msg.LCDINIT_M = "設定螢幕鏡像翻轉"

Blockly.Msg.LCDROTATION = "設定LCD螢幕旋轉";

Blockly.Msg.LCDMF = "設定LCD螢幕鏡面翻轉";

Blockly.Msg.LCDDFSW = "設定LCD螢幕填充顏色為";


Blockly.Msg.LCDDT = "設定LCD顯示文本";
Blockly.Msg.LCDDT_C = "字串顏色";
Blockly.Msg.LCDDT_BC = "背景色";
Blockly.Msg.LED_COORDINATE = "座標";
Blockly.Msg.WIFISERVER_SERVERSEND_CONTENT = "內容";

Blockly.Msg.LCDDLOC = "繪製直線";

Blockly.Msg.LCDDCC = "LCD創建空白畫布";
Blockly.Msg.LCDDCC_F = "填充圖像：";
Blockly.Msg.LCDDCC_I = "圖像路徑：";

Blockly.Msg.LCDDSC = "顯示畫布";
Blockly.Msg.LCDDSC_SC = "設定座標";
Blockly.Msg.LCDDSC_X = " X：";
Blockly.Msg.LCDDSC_Y = " Y：";

Blockly.Msg.LCD_CANVAS = "在畫布";
Blockly.Msg.LCDDTOC = "繪製文本";
Blockly.Msg.LCDDTOC_SH = "設定換行";

Blockly.Msg.LCDDASOC = "繪製箭頭標誌";
Blockly.Msg.LCDDASOC_SC = "開始座標";
Blockly.Msg.LCDDASOC_EC = "結束座標";
Blockly.Msg.LCDDASOC_LC = "線條顏色";
Blockly.Msg.LCDDASOC_LT = "線條粗細";
Blockly.Msg.LCDDASOC_T = "厚度";

Blockly.Msg.LCDDFROC = "繪製";
Blockly.Msg.LCDDFROC_R = "矩形";
Blockly.Msg.LCDDFROC_C = "圓形";
Blockly.Msg.LCDRADIUS = "半徑";

Blockly.Msg.LCDDCSOC = "繪製十字標誌";

Blockly.Msg.LCDCEOC = "清除畫布上的所有內容";

Blockly.Msg.LCDSCIC = "設定畫布";
Blockly.Msg.LCDSCIC_I = "顏色反轉";

Blockly.Msg.LCDSCCRTW = "設定畫布";
Blockly.Msg.LCDSCCRTW_R = "調整為寬度";
Blockly.Msg.LCDSCCRTW_TCANC = "然後創建一個新畫布";

Blockly.Msg.LCDDI = "顯示在";

Blockly.Msg.LCDSCCCVTP = "設定畫布：畫布將矢量轉換為像素";

Blockly.Msg.LCDRQ = "二維碼";


Blockly.Msg.CAMERAINIT = "相機初始化";
Blockly.Msg.CAMERAINIT_SFS = "設定幀大小：";
Blockly.Msg.CAMERAINIT_SFS_I = " in";
Blockly.Msg.CAMERAINIT_SWW = "設定窗口寬度：224高度：224";
Blockly.Msg.CAMERAINIT_SVFOSHMO = "設定垂直​​翻轉";
Blockly.Msg.CAMERAINIT_SVFOSHMO_O = "設定水平鏡像"
Blockly.Msg.CAMERAINIT_SABOSAGO = "設定自動平衡：";
Blockly.Msg.CAMERAINIT_SABOSAGO_O = "設定自動增益：";
Blockly.Msg.CAMERAINIT_SCBS = "設定對比度：";
Blockly.Msg.CAMERAINIT_SCBS_B = "亮度：";
Blockly.Msg.CAMERAINIT_SCBS_S = "飽和度：";

Blockly.Msg.CAMERASVFO = "設定垂直​​翻轉";
Blockly.Msg.CAMERASVFO_SHMO = "設定水平鏡像";
Blockly.Msg.CAMERASVFO_SABO = "設定自動白平衡";
Blockly.Msg.CAMERASVFO_SAGO = "設定自動增益";
Blockly.Msg.CAMERASVFO_SCT = "設定對比度為";
Blockly.Msg.CAMERASVFO_SBT = "設定亮度為";
Blockly.Msg.CAMERASVFO_SST = "將飽和度設定為";

Blockly.Msg.CAMERGICFC = "獲取從相機捕捉的圖像";
Blockly.Msg.CAMERGICFC_SCT = "選擇攝像機類型：正常";

Blockly.Msg.MODELLPM = "加載並初始化預設模型:";

Blockly.Msg.CAMERINIT = "初始化預設模型：單數字識別";
Blockly.Msg.CAMERINIT_SISF = "設定要識別的圖像源爲：";
Blockly.Msg.CAMERINIT_FPM = "獲取手寫數字識別模型的識別結果";
Blockly.Msg.CAMERINIT_GCDN = "獲取當前檢測到的數字 (0-9)";
Blockly.Msg.CAMERINIT_CRC = "獲取當前檢測的置信度 (%)";
Blockly.Msg.CAMERINIT_GTCS = "獲取當前檢測的置信度 (%)";

Blockly.Msg.MODELS_L = "識別到了任意常見物體";

Blockly.Msg.MODELS_GET_F = "從";
Blockly.Msg.MODELS_GET_G = "獲取識別到常見物體的";
Blockly.Msg.MODELS_GET_O = "物體名稱";
Blockly.Msg.MODELS_GET_X = "檢測框的X軸座標";
Blockly.Msg.MODELS_GET_Y = "檢測框的Y軸座標";
Blockly.Msg.MODELS_GET_W = "檢測框的寬度";
Blockly.Msg.MODELS_GET_H = "檢測框的高度";
Blockly.Msg.MODELS_GET_NO = "物體數量";
Blockly.Msg.MODELS_GET_S = "序號";
Blockly.Msg.MODELS_GET_C = "置信度";

Blockly.Msg.MODELS_FACE = "識別到了人臉";

Blockly.Msg.MODELS_XY_F = "獲取識別到人臉的";
Blockly.Msg.MODELS_XY_N = "數量";

Blockly.Msg.MODELS_SDR = "手寫數字識別模型 (MNIST)";
Blockly.Msg.MODELS_COR = "常見物體識別模型";
Blockly.Msg.MODELS_AR = "常見動物識別模型";
Blockly.Msg.MODELS_HFR = "人臉檢測模型";

Blockly.Msg.CAMERINITPM = "初始化預設模型：通用對象識別";
Blockly.Msg.CAMERINITPM_SMSFIOR = "從設定圖像源";
Blockly.Msg.CAMERINITPM_ACOID = "檢測到任何公共對象";
Blockly.Msg.CAMERINITPM_IACOID = "如果檢測到任何公共對象";
Blockly.Msg.CAMERINITPM_D = "執行";
Blockly.Msg.CAMERINITPM_E = "其他";
Blockly.Msg.CAMERINITPM_FPM = "來自預設模型：通用對象識別";
Blockly.Msg.CAMERINITPM_G = "獲取";
Blockly.Msg.CAMERINITPM_GIOTCOD = "檢測到公共對象";
Blockly.Msg.CAMERINITPM_DCOIA = "檢測到的公共對象為";



Blockly.Msg.CAMERINITPMA = "初始化預設模型：動物識別";
Blockly.Msg.CAMERINITPMA_AAOID = "檢測到任何動物";
Blockly.Msg.CAMERINITPMA_IAAOID = "如果檢測到任何動物";
Blockly.Msg.CAMERINITPMA_FPMA = "來自預設模型：動物確認";
Blockly.Msg.CAMERINITPMA_GIOTCAD = "檢測到的動物";
Blockly.Msg.CAMERINITPMA_DAOIA = "檢測到的動物是";



Blockly.Msg.CAMERINITPMF = "初始化預設模型：人臉檢測";
Blockly.Msg.CAMERINITPMF_SISFIF = "從設定圖像源";
Blockly.Msg.CAMERINITPMF_AFID = "檢測到任何人的臉";
Blockly.Msg.CAMERINITPMF_IAFID = "如果檢測到人臉";
Blockly.Msg.CAMERINITPMF_FPM = "來自預設模型：人臉檢測";
Blockly.Msg.CAMERINITPMF_GIOTFD = "檢測到的臉";

Blockly.Msg.CAMERINITPMF_LCMLM = "加載定制的機器學習模型";
Blockly.Msg.CAMERINITPMF_FSC = "來自SD卡：";

Blockly.Msg.CAMERINIINNYFNOT = "初始化神經網絡YOLOv2"
Blockly.Msg.CAMERINIINNYFNOT_F = "來自網絡對象";
Blockly.Msg.CAMERINIINNYFNOT_SPT = "設定概率閾值："
Blockly.Msg.CAMERINIINNYFNOT_SPT_S = "設定盒IoU閾值：";
Blockly.Msg.CAMERINITPMF_SNOAA = "設定錨點數量"
Blockly.Msg.CAMERINITPMF_SNOAA_S = "將錨設定為：錨";


Blockly.Msg.CAMERGRFRNNY = "從運行神經網絡YOLOv2獲得結果";
Blockly.Msg.CAMERGRFRNNY_FNOT = "來自網絡對象";
Blockly.Msg.CAMERGRFRNNY_SNOLTCTTN = "設定要計算到網絡的層數："
Blockly.Msg.CAMERGRFRNNY_SISA = "將圖像源設定為：";

Blockly.Msg.CAMERGFMOFNOT = "從網絡對象獲取要素地圖對象";
Blockly.Msg.CAMERGFMOFNOT_SNOLTCTTN = "設定要計算到網絡的層數："
Blockly.Msg.CAMERGFMOFNOT_SISAC = "將圖像源設定為：";


Blockly.Msg.CAMERDNOT = "取消初始化網絡對象";


Blockly.Msg.VISION_SIF_D = "檢測線條顏色：";
Blockly.Msg.VISION_SIF_G = "獲取方向偏移值";
Blockly.Msg.VISION_SIF_GF = "來自雙線檢測";



Blockly.Msg.MPHONE = "咪高峰初始化";
Blockly.Msg.MPHONE_A = "從咪高峰獲取環境聲音強度";


Blockly.Msg.AUDIO_S = "喇叭初始化";
Blockly.Msg.AUDIO_S_P = "播放音訊檔案";
Blockly.Msg.AUDIO_S_PS = "設定音量";
Blockly.Msg.AUDIO_S_PF = "文件路徑：";

Blockly.Msg.AUDIO_SET = "設定音訊播放音量";

Blockly.Msg.VIDEO_S = "影片錄製初始化";
Blockly.Msg.VIDEO_S_S = "檔案保存路徑：";
Blockly.Msg.VIDEO_G = "從影像源";
Blockly.Msg.VIDEO_S_I = "錄製影片";
Blockly.Msg.VIDEO_S_R = "停止錄製影片";

Blockly.Msg.VIDEO_SET_F = "播放影片檔案";
Blockly.Msg.VIDEO_SET_P = "檔案路徑：";

Blockly.Msg.VIDEO_NUM = "設定影片播放音量 ";

Blockly.Msg.VIDEO_STATUS = "獲取影片播放的狀態";

Blockly.Msg.SYSTEM = "重啟系統";
Blockly.Msg.SYSTEM_GC = "啟動記憶體回收";

Blockly.Msg.SYSTEM_RUN = "執行 Python 程式";
Blockly.Msg.SYSTEM_RUN_F = "程式所在路徑:";

Blockly.Msg.SYSTEM_CREATE = "創建文本檔案";
Blockly.Msg.SYSTEM_CREATE_F = "檔名:";


Blockly.Msg.SYSTEM_WRITE = "創建文本檔案";
Blockly.Msg.SYSTEM_WRITE_F = "檔案名稱:";
Blockly.Msg.SYSTEM_WRITE_W = "寫入內容：";
Blockly.Msg.SYSTEM_WRITE_S = "分隔符號為:";
Blockly.Msg.SYSTEM_WRITE_S_N = "換行";
Blockly.Msg.SYSTEM_WRITE_S_C = "逗號";
Blockly.Msg.SYSTEM_WRITE_S_S = "空格";
Blockly.Msg.SYSTEM_WRITE_S_SE = "分號";

Blockly.Msg.SYSTEM_INPUT = "讀取文本檔案為陣列";

Blockly.Msg.SERIALPORT_PRINT_TITLE = "串口列印 %1";

Blockly.Msg.SERIALPORT_SPACER = "間隔符";
Blockly.Msg.SERIALPORT_TERMINATOR = "結束符";
Blockly.Msg.SERIALPORT_DATA = "數據";


Blockly.Msg.SERIALPORT_COLOR = "字串顏色";
Blockly.Msg.SERIALPORT_TCOLOR = "字串底色";

Blockly.Msg.SERIALPORT_SLDT = "設定LCD螢幕顯示字串";

Blockly.Msg.LCD_CLEAR = "清除螢幕";

Blockly.Msg.CAMERA_WINDOW = "設定相機視窗化";
Blockly.Msg.CAMERA_SIZE = "視窗尺寸";


Blockly.Msg.CAMERA_INIT = "相機初始化";
Blockly.Msg.CAMERA_CIS = "設定捕捉的影像尺寸：";
Blockly.Msg.CAMERA_COCI = "設定捕捉的影像顏色模式為：";

Blockly.Msg.CAMERA_C = "彩色";
Blockly.Msg.CAMERA_BW = "黑白";


/*
  __  __       _   _     
 |  \/  | __ _| |_| |__  
 | |\/| |/ _` | __| '_ \ 
 | |  | | (_| | |_| | | |
 |_|  |_|\__,_|\__|_| |_|
                         
*/

Blockly.Msg.math_degrad_rad = "轉換角度為弧度";
Blockly.Msg.math_degrad_deg = "轉換弧度為角度";

/*
  ___                   _      _____        _               _   
 |_ _|_ __  _ __  _   _| |_   / / _ \ _   _| |_ _ __  _   _| |_ 
  | || '_ \| '_ \| | | | __| / / | | | | | | __| '_ \| | | | __|
  | || | | | |_) | |_| | |_ / /| |_| | |_| | |_| |_) | |_| | |_ 
 |___|_| |_| .__/ \__,_|\__/_/  \___/ \__,_|\__| .__/ \__,_|\__|
           |_|                                 |_|              
*/

Blockly.Msg.io_high = "高電平";
Blockly.Msg.io_low = "低電平";
Blockly.Msg.digital_set = "設定引腳 (GPIO)";
Blockly.Msg.digital_set_as = "爲";
Blockly.Msg.digital_get = "獲取引腳 (GPIO)";
Blockly.Msg.digital_get_value = "的數碼訊號數值";

Blockly.Msg.analog_get = "IoT 模組獲取引腳 (GPIO)";
Blockly.Msg.analog_get_value = "的類比訊號數值 (PWM)";
Blockly.Msg.analog_set = "IoT 模組設定引腳#";
Blockly.Msg.analog_set_ai = "A.I. 模組設定引腳#";
Blockly.Msg.analog_set_freq = "設定頻率爲:";
Blockly.Msg.analog_set_pwm = "設定 PWM 爲:";
Blockly.Msg.set_pwm = "的類比輸出為";
Blockly.Msg.led = "LED";
Blockly.Msg.control = "控制";

Blockly.Msg.analog_set_timer = "設定 Timer 爲:";
Blockly.Msg.analog_set_timer_channel = "設定 Timer 頻道爲:"; 



/*
  _____ _                
 |_   _(_)_ __ ___   ___ 
   | | | | '_ ` _ \ / _ \
   | | | | | | | | |  __/
   |_| |_|_| |_| |_|\___|
                         
*/

Blockly.Msg.time_iot_module = "IoT 模組 ";
Blockly.Msg.time_ai_module = "AI 模組";
Blockly.Msg.time_init_timer = "初始化計時器";
Blockly.Msg.time_timer_get_time = "獲取計時器已過時間（毫秒）";
Blockly.Msg.time_timer_clear = "清除計時器";
Blockly.Msg.time_timer_periodically = "啟用週期重複計時器";
Blockly.Msg.time_timer_every = "每隔";
Blockly.Msg.time_timer_ms = "毫秒";
Blockly.Msg.time_execution = "執行";
Blockly.Msg.time_timer_periodically_clear = "清除週期重複計時器";

Blockly.Msg.time_get_current_date_title = "獲取本地時間:";
Blockly.Msg.time_get_current_date_y = "年";
Blockly.Msg.time_get_current_date_m = "月";
Blockly.Msg.time_get_current_date_d = "日";
Blockly.Msg.time_get_current_date_hour = "時";
Blockly.Msg.time_get_current_date_min = "分";
Blockly.Msg.time_get_current_date_sec = "秒";


/*
  ____            _       _    ____                            
 / ___|  ___ _ __(_) __ _| |  / ___|___  _ __ ___  _ __ ___    
 \___ \ / _ \ '__| |/ _` | | | |   / _ \| '_ ` _ \| '_ ` _ \   
  ___) |  __/ |  | | (_| | | | |__| (_) | | | | | | | | | | |_ 
 |____/ \___|_|  |_|\__,_|_|  \____\___/|_| |_| |_|_| |_| |_(_)

*/
Blockly.Msg.serialcomm_print = "序列埠打印";
Blockly.Msg.serialcomm_write_title_text = "通過串列埠傳送資料至其他設備";
Blockly.Msg.serialcomm_write_item_first = "第 ";
Blockly.Msg.serialcomm_write_item_last = " 位資料:";
Blockly.Msg.serialcomm_write_item = "項目";
Blockly.Msg.serialcomm_write_data = "資料";
Blockly.Msg.serialcomm_write_data_bps_title = "設定波特率為:";
Blockly.Msg.serialcomm_write_data_bps_attrib = "位元／秒";
Blockly.Msg.serialcomm_write_on = "使用";
Blockly.Msg.serialcomm_write_on_ai = "AI 模組 ";
Blockly.Msg.serialcomm_write_on_iot = "IoT 模組";
Blockly.Msg.serial_send_data_on = "在";
Blockly.Msg.serial_send_data_on_send_data = "模組上發送資料至 Microbit"


/*
  ____            _      
 | __ )  __ _ ___(_) ___ 
 |  _ \ / _` / __| |/ __|
 | |_) | (_| \__ \ | (__ 
 |____/ \__,_|___/_|\___|

*/

Blockly.Msg.basic_button_read_value = "讀取按鈕";
Blockly.Msg.basic_button_read_value_after = "的電平狀態";

Blockly.Msg.basic_buzzer_set = "蜂鳴器設定音調頻率爲 (Hz):";
Blockly.Msg.basic_temperature = "溫度";
Blockly.Msg.basic_humidity = "溼度";
Blockly.Msg.basic_pressure = "大氣壓";
Blockly.Msg.basic_env_value = "數值";
Blockly.Msg.basic_motion_use = "使用運動傳感器";


Blockly.Msg.basic_when_shaking_when_module = "當模組";
Blockly.Msg.basic_when_shaking_when_is_in = "處於";
Blockly.Msg.basic_when_shaking_when_is_not_in = "不處於";
Blockly.Msg.basic_when_shaking_when_shaking = "搖晃狀態時";

Blockly.Msg.basic_when_shaking = "當模組處於搖晃狀態時";
Blockly.Msg.basic_when_shaking_not = "當模組不處於搖晃狀態時";

Blockly.Msg.basic_when_tilting_get = "當模組";
Blockly.Msg.basic_when_tilting_get_left = "向左";
Blockly.Msg.basic_when_tilting_get_right = "向右";
Blockly.Msg.basic_when_tilting_get_forward = "向前";
Blockly.Msg.basic_when_tilting_get_backward = "向後";

Blockly.Msg.basic_when_tilting_not_tilting = "沒有";

Blockly.Msg.basic_when_tilting_get_when = "傾斜時";
Blockly.Msg.basic_motion_get = "獲取";
Blockly.Msg.basic_motion_accel = "軸的加速度";
Blockly.Msg.basic_motion_angle = "軸的傾斜角度";
Blockly.Msg.basic_light_get = "獲取光線值";
Blockly.Msg.basic_light_get = "获取光線值 (範圍: 0~1023)";


Blockly.Msg.basic_motion_statement_exec = "執行";


/*
  ____  _           _             
 |  _ \(_)___ _ __ | | __ _ _   _ 
 | | | | / __| '_ \| |/ _` | | | |
 | |_| | \__ \ |_) | | (_| | |_| |
 |____/|_|___/ .__/|_|\__,_|\__, |
             |_|            |___/ 
*/

Blockly.Msg.display_clear_screen = "清除 LCD 螢幕";
Blockly.Msg.display_fill_screen = "設定 LCD 鋪滿顏色為";
Blockly.Msg.display_draw_pixel = "像素點";
Blockly.Msg.display_draw_vertical = "垂直";
Blockly.Msg.display_draw_horizontal = "水平";
Blockly.Msg.display_start_cord = "起始座標";
Blockly.Msg.display_length = "長度";
Blockly.Msg.display_draw_rectangle = "矩形";
Blockly.Msg.display_drawqr_text = " QR 二維碼";
Blockly.Msg.display_drawqr_content = "文本內容";
Blockly.Msg.display_drawqr_padding = "邊距寬度";
Blockly.Msg.display_draw_text = "字串";
Blockly.Msg.display_draw_text_content = "文本內容";
Blockly.Msg.display_draw_text_size = "字串大小";
Blockly.Msg.display_draw_text_return = "是否換行";
Blockly.Msg.display_red = "紅";
Blockly.Msg.display_green = "綠";
Blockly.Msg.display_blue = "藍";

/*
 __        ___       _____ _ 
 \ \      / (_)     |  ___(_)
  \ \ /\ / /| |_____| |_  | |
   \ V  V / | |_____|  _| | |
    \_/\_/  |_|     |_|   |_|
                             
*/

Blockly.Msg.wifi_setup_hotspot = "建立 Wi-Fi 熱點";
Blockly.Msg.wifi_hotspot_ssid = "SSID:";
Blockly.Msg.wifi_hotspot_pass = "密碼:";
Blockly.Msg.wifi_connect_router = "連接 WiFi 網絡";
Blockly.Msg.wifi_router_ssid = "SSID:";
Blockly.Msg.wifi_router_pass = "密碼:";
Blockly.Msg.wifi_router_disconnect = "斷開 WiFi 連接";
Blockly.Msg.wifi_hotspot_get_clients = "獲取當前已連接的設備數量";
Blockly.Msg.wifi_hotspot_get_list = "獲取當前已連接的設備陣列";
Blockly.Msg.wifi_router_connection_status = "獲取 WiFi 連接狀態";
Blockly.Msg.wifi_close_hotspot = "關閉 Wi-Fi 熱點";
Blockly.Msg.wifi_router_get_info = "獲取 WiFi 配置信息";
Blockly.Msg.wifi_router_device_ip = "IP";
Blockly.Msg.wifi_router_device_mask = "子網掩碼";
Blockly.Msg.wifi_router_device_gateway = "網關";
Blockly.Msg.wifi_router_device_dns = "DNS";

Blockly.Msg.wifi_ntptime_title = "同步網絡時間";
Blockly.Msg.wifi_ntptime_set_timezone = "設定同步時區";
Blockly.Msg.wifi_ntptime_utc8 = "東8區";
Blockly.Msg.wifi_ntptime_utc9 = "東9區";
Blockly.Msg.wifi_ntptime_utc10 = "東10區";
Blockly.Msg.wifi_ntptime_utc11 = "東11區";
Blockly.Msg.wifi_ntptime_utc12 = "東12區";
Blockly.Msg.wifi_ntptime_utcm12 = "西12區";
Blockly.Msg.wifi_ntptime_utcm11 = "西區";
Blockly.Msg.wifi_ntptime_utcm10 = "西區";
Blockly.Msg.wifi_ntptime_utcm9 = "西9區";
Blockly.Msg.wifi_ntptime_utcm8 = "西8區";
Blockly.Msg.wifi_ntptime_utcm7 = "西7區";
Blockly.Msg.wifi_ntptime_utcm6 = "西6區";
Blockly.Msg.wifi_ntptime_utcm5 = "西5區";
Blockly.Msg.wifi_ntptime_utcm4 = "西4區";
Blockly.Msg.wifi_ntptime_utcm3 = "西3區";
Blockly.Msg.wifi_ntptime_utcm2 = "西2區";
Blockly.Msg.wifi_ntptime_utcm1 = "西1區";
Blockly.Msg.wifi_ntptime_utc0 = "中時區";
Blockly.Msg.wifi_ntptime_utc1 = "東1區";
Blockly.Msg.wifi_ntptime_utc2 = "東2區";
Blockly.Msg.wifi_ntptime_utc3 = "東3區";
Blockly.Msg.wifi_ntptime_utc4 = "東4區";
Blockly.Msg.wifi_ntptime_utc5 = "東5區";
Blockly.Msg.wifi_ntptime_utc6 = "東6區";
Blockly.Msg.wifi_ntptime_utc7 = "東7區";
Blockly.Msg.wifi_ntptime_time_server = "設定同步伺服器:";


Blockly.Msg.wifi_web_http_server_setup = "HTTP 伺服器初始化";
Blockly.Msg.wifi_web_http_server_route_setting_title = "HTTP 伺服器設定訪問路徑";
Blockly.Msg.wifi_web_http_server_route_setting_path = "當路徑:";
Blockly.Msg.wifi_web_http_server_route_setting_being_requested = "被請求時";
Blockly.Msg.wifi_web_http_server_route_setting_property = "設定請求屬性爲:";
Blockly.Msg.wifi_web_http_server_route_setting_get = "GET 請求";
Blockly.Msg.wifi_web_http_server_route_setting_post = "POST 請求";
Blockly.Msg.wifi_web_http_server_route_setting_do = "執行";
Blockly.Msg.wifi_web_http_server_respond_title = "HTTP 伺服器設定響應內容爲:";
Blockly.Msg.wifi_web_http_server_respond_type = "設定返回資料類型:";
Blockly.Msg.wifi_web_http_server_respond_text = "純文本";
Blockly.Msg.wifi_web_http_server_respond_json = "字典類型資料 (JSON)";
Blockly.Msg.wifi_web_http_server_respond_html = "網頁 (HTML 程式碼)";
Blockly.Msg.wifi_web_http_server_respond_exec = "響應";
Blockly.Msg.wifi_web_http_server_get_title = "HTTP 伺服器獲取從客戶端收到的資料，類型爲";
Blockly.Msg.wifi_web_http_server_get_as_json = "字典類型資料 (JSON)";
Blockly.Msg.wifi_web_http_server_get_as_text = "文本";


/*
  _   _ ____       ___    _____ 
 | \ | | __ )     |_ _|__|_   _|
 |  \| |  _ \ _____| |/ _ \| |  
 | |\  | |_) |_____| | (_) | |  
 |_| \_|____/     |___\___/|_|  

*/


Blockly.Msg.nbiot_module_which_module_iot = "在 IoT 模組上";
Blockly.Msg.nbiot_module_which_module_ai = "在 AI 模組上";

Blockly.Msg.nbiot_module_init = "NB-IoT 模組通訊初始化";
Blockly.Msg.nbiot_module_power = "獲取 NB-IoT 模組啓用狀態";
Blockly.Msg.nbiot_module_connectivity = "獲取 NB-IoT 模組網絡連接狀態";
Blockly.Msg.nbiot_module_ip = "獲取 NB-IoT 模組網絡 IP 地址";
Blockly.Msg.nbiot_onenet_title = "NB-IoT 模組連接 OneNET";
Blockly.Msg.nbiot_onenet_connect_productid = "產品 ID:";
Blockly.Msg.nbiot_onenet_connect_deviceid = "設備 ID:";
Blockly.Msg.nbiot_onenet_connect_device_api = "設備 API Key:";
Blockly.Msg.nbiot_onenet_connectivity = "NB-IoT 模組獲取 OneNET 連接狀態";
Blockly.Msg.nbiot_onenet_send_title = "NB-IoT 模組發送資料至 OneNET";
Blockly.Msg.nbiot_onenet_send_property = "屬性名稱: ";
Blockly.Msg.nbiot_onenet_when_incoming_msg = "當 NB-IoT 模組從 OneNET 收到消息";
Blockly.Msg.nbiot_onenet_when_incoming_msg_when = "時";
Blockly.Msg.nbiot_onenet_when_incoming_msg_exec = "執行";
Blockly.Msg.nbiot_onenet_receive_command = "獲取 NB-IoT 模組從 OneNET 發送的指令";
Blockly.Msg.nbiot_cococloud_get_event_title = "NB-IoT 模組獲取 CocoCloud 事件資料";
Blockly.Msg.nbiot_cococloud_get_event_api = "雲端事件 API Key:";
Blockly.Msg.nbiot_cococloud_get_property = "獲取 CocoCloud 事件中屬性爲";
Blockly.Msg.nbiot_cococloud_get_data = "的資料";
Blockly.Msg.nbiot_cococloud_send_title = "NB-IoT 模組發送資料至 CocoCloud";
Blockly.Msg.nbiot_cococloud_send_api = "事件 API Key:";
Blockly.Msg.nbiot_cococloud_send_property = "屬性名稱: ";
Blockly.Msg.nbiot_http_get_title = "發送 HTTP GET 請求";
Blockly.Msg.nbiot_http_get_url = "設定目標網址:";



/*
  ___       _                       _   
 |_ _|_ __ | |_ ___ _ __ _ __   ___| |_ 
  | || '_ \| __/ _ \ '__| '_ \ / _ \ __|
  | || | | | ||  __/ |  | | | |  __/ |_ 
 |___|_| |_|\__\___|_|  |_| |_|\___|\__|

*/


Blockly.Msg.internet_server_setup = "HTTP 伺服器初始化";
Blockly.Msg.internet_server_set_max = "設定最大連接數:";
Blockly.Msg.internet_server_set_source = "獲取發起請求設備的來源 IP";
Blockly.Msg.internet_response_http_content_title = "獲取 HTTP 響應內容的";
Blockly.Msg.internet_response_text = "文本";
Blockly.Msg.internet_response_content = "內容";
Blockly.Msg.internet_response_status = "狀態碼";
Blockly.Msg.internet_response_json = "JSON資料";
Blockly.Msg.internet_response_encode = "編碼";
Blockly.Msg.internet_response_reason = "原因短語";
Blockly.Msg.internet_http_get_title = "發送 HTTP GET 請求";
Blockly.Msg.internet_http_get_url = "設定目標網址:";
Blockly.Msg.internet_http_post_title = "發送 HTTP POST 請求";
Blockly.Msg.internet_http_post_url = "設定目標網址:";
Blockly.Msg.internet_http_post_json = "提交資料 (JSON):";

Blockly.Msg.internet_http_get_server_data_title = "獲取從本地 HTTP 伺服器請求得到的資料";
Blockly.Msg.internet_http_get_server_data_type = "資料類型爲:";
Blockly.Msg.internet_http_get_server_data_json = "字典資料類型";
Blockly.Msg.internet_http_get_server_data_text = "純文本";

Blockly.Msg.internet_ws_setup_send_text = "實時通信 (WebSocket) 發送端初始化";
Blockly.Msg.internet_ws_setup_send_ip = "設定目標設備 IP:";
Blockly.Msg.internet_ws_send_msg = "透過實時通信 (WebSocket) 發送消息";
Blockly.Msg.internet_ws_setup_recv = "實時通信 (WebSocket) 接收端初始化";
Blockly.Msg.internet_ws_setup_receiving = "當實時通信 (WebSocket) 收到消息時";
Blockly.Msg.internet_ws_setup_recv_exec = "執行";
Blockly.Msg.internet_ws_setup_get_msg = "獲取從實時通信 (WebSocket) 接收到的消息";
Blockly.Msg.internet_ws_setup_get_msg_type = "類型爲";
Blockly.Msg.internet_ws_setup_get_msg_text = "文本";
Blockly.Msg.internet_ws_setup_get_msg_json = "字典類型資料 (JSON)";


/*
  ___    _____   ____                  _          
 |_ _|__|_   _| / ___|  ___ _ ____   _(_) ___ ___ 
  | |/ _ \| |   \___ \ / _ \ '__\ \ / / |/ __/ _ \
  | | (_) | |    ___) |  __/ |   \ V /| | (_|  __/
 |___\___/|_|   |____/ \___|_|    \_/ |_|\___\___|

*/


Blockly.Msg.iotservice_thingspeak_send_title = "傳送資料至 ThingSpeak 頻道 (Channel)";
Blockly.Msg.iotservice_thingspeak_send_api_set = "設定頻道 API Key:";
Blockly.Msg.iotservice_thingspeak_send_data_1 = "資料1";
Blockly.Msg.iotservice_onenet_mqtt_setup = "OneNET 物聯網平臺 (MQTTS) 連線初始化";
Blockly.Msg.iotservice_onenet_mqtt_server = "設定連線伺服器:";
Blockly.Msg.iotservice_onenet_mqtt_productid = "設定產品 ID:";
Blockly.Msg.iotservice_onenet_mqtt_productkey = "設定產品 API Key:";
Blockly.Msg.iotservice_onenet_mqtt_deviceid = "設定裝置 ID:";
Blockly.Msg.iotservice_onenet_mqtt_send = "往 OneNET 傳送資料";
Blockly.Msg.iotservice_onenet_mqtt_send_item = "屬性名稱: ";
Blockly.Msg.iotservice_onenet_mqtt_receive = "當從 OneNET 收到訊息為";
Blockly.Msg.iotservice_onenet_mqtt_receive_when = "時";
Blockly.Msg.iotservice_onenet_mqtt_receive_exec = "執行";
Blockly.Msg.iotservice_onenet_mqtt_disconnect = "斷開 OneNET 連線";
Blockly.Msg.iotservice_ifttt_send_title = "傳送資料到 IFTTT Webhooks 事件";
Blockly.Msg.iotservice_ifttt_send_webhook = "Webhooks API Key:";
Blockly.Msg.iotservice_ifttt_send_eventname = "事件名稱:";
Blockly.Msg.iotservice_ifttt_send_1 = "資料 1:";
Blockly.Msg.iotservice_ifttt_send_2 = "資料 2:";
Blockly.Msg.iotservice_ifttt_send_3 = "資料 3:";
Blockly.Msg.iotservice_ifttt_trigger_title = "觸發 IFTTT 事件";
Blockly.Msg.iotservice_ifttt_trigger_webhook = "Webhook API Key:";
Blockly.Msg.iotservice_ifttt_trigger_eventname = "事件名稱:";
Blockly.Msg.iotservice_thingspeak_send_title = "傳送資料至 ThingSpeak 頻道";
Blockly.Msg.iotservice_thingspeak_send_api = "頻道 API Key:";
Blockly.Msg.iotservice_thingspeak_query_title = "查詢 ThingSpeak 指定頻道的資料";
Blockly.Msg.iotservice_thingspeak_query_api = "頻道 API Key:";
Blockly.Msg.iotservice_thingspeak_channel_id = "頻道 ID:";
Blockly.Msg.iotservice_thingspeak_read_total = "獲取 ThingSpeak 頻道中的資料總量";
Blockly.Msg.iotservice_thingspeak_get_title = "獲取 ThingSpeak 頻道中第";
Blockly.Msg.iotservice_thingspeaK_get_field = "條資料的 Field";
Blockly.Msg.iotservice_thingspeaK_get_value = "的數值";
Blockly.Msg.iotservice_cococloud_send_title = "傳送資料至 CocoCloud 事件";
Blockly.Msg.iotservice_cococloud_send_title_api = "事件 API Key:";
Blockly.Msg.iotservice_cococloud_send_property = "屬性名稱: ";
Blockly.Msg.iotservice_cococloud_get_title = "獲取 CocoCloud 事件中的資料";
Blockly.Msg.iotservice_cococloud_get_api = "事件 API Key:";
Blockly.Msg.iotservice_cococloud_get_property = "獲取 CocoCloud 事件中屬性為";
Blockly.Msg.iotservice_cococloud_get_data = "的資料";



/*
  ____            _                 
 / ___| _   _ ___| |_ ___ _ __ ___  
 \___ \| | | / __| __/ _ \ '_ ` _ \ 
  ___) | |_| \__ \ ||  __/ | | | | |
 |____/ \__, |___/\__\___|_| |_| |_|
        |___/                                                                    
*/


Blockly.Msg.system_code_path = "程式路徑爲:";
Blockly.Msg.system_get_size = "獲取模組內剩余空間（單位: MB）";
Blockly.Msg.system_get_mac = "獲取模組的 MAC 地址";
Blockly.Msg.system_get_cocorobo_cid = "獲取 IoT 模組 ID";




/*
  _     _____ ____    ____  _        _       
 | |   | ____|  _ \  / ___|| |_ _ __(_)_ __  
 | |   |  _| | | | | \___ \| __| '__| | '_ \ 
 | |___| |___| |_| |  ___) | |_| |  | | |_) |
 |_____|_____|____/  |____/ \__|_|  |_| .__/ 
                                      |_|                                               
*/


Blockly.Msg.ledstrip_setup_text_iot = "在 IoT 模組上 "
Blockly.Msg.ledstrip_setup_text_ai = "在 AI 模組上";

Blockly.Msg.ledstrip_setup_text = "LED 燈帶";
Blockly.Msg.ledstrip_setup = "初始化";
Blockly.Msg.ledstrip_set_gpio = "設定燈帶引腳 (IO):";
Blockly.Msg.ledstrip_set_total_led = "設定燈帶中燈的數量:";
Blockly.Msg.ledstrip_set_light_up = "點亮 LED 燈帶";
Blockly.Msg.ledstrip_set_no = "設定要點亮的 LED 燈序號:";
Blockly.Msg.ledstrip_set_color = "並設定顏色為:";

Blockly.Msg.ledstrip_setup_text_show_above_set = "使燈帶";
Blockly.Msg.ledstrip_setup_text_show_above = "顯示以上效果";

Blockly.Msg.ledstrip_set_brightness_setup = "設定燈帶亮度爲:";


Blockly.Msg.Pedometer_Init = "初始化計步器";
Blockly.Msg.Pedometer_Run = "運行計步器";
Blockly.Msg.Pedometer_Get = "獲取計數";

Blockly.Msg.Pedometer_Init_time = "時間間隔";
Blockly.Msg.Pedometer_Init_sensitivity = "靈敏度";

Blockly.Msg.ledstrip_set_brightness_1 = "設定 LED 燈帶亮度爲:";
Blockly.Msg.ledstrip_set_brightness_after = "(亮度範圍: 0~255)";


/*
  ____                       
 / ___|  ___ _ ____   _____  
 \___ \ / _ \ '__\ \ / / _ \ 
  ___) |  __/ |   \ V / (_) |
 |____/ \___|_|    \_/ \___/ 
                                                                             
*/


Blockly.Msg.servo_setup = "IoT 模組伺服馬達初始化";
Blockly.Msg.servo_set_gpio = "IoT 模組設定位於引腳 #";
Blockly.Msg.servo_rotate_to = "的伺服馬達轉動至";
Blockly.Msg.servo_degree = "度 (0˚~180˚)";

Blockly.Msg.servo_setup_ai = "AI 模組伺服馬達初始化";
Blockly.Msg.servo_set_gpio_ai = "AI 模組設定位於引腳 #";
Blockly.Msg.servo_rotate_to_ai = "的伺服馬達轉動至";
Blockly.Msg.servo_degree_ai = "度 (0˚~180˚)";


/*
  __  __       _             
 |  \/  | ___ | |_ ___  _ __ 
 | |\/| |/ _ \| __/ _ \| '__|
 | |  | | (_) | || (_) | |   
 |_|  |_|\___/ \__\___/|_|   

*/

Blockly.Msg.x_motor_set_motor = "IoT 模組馬達驅動初始化";
Blockly.Msg.x_motor_set_motor_turn = "IoT 模組設定馬達";
Blockly.Msg.x_motor_set_motor_speed = "以速度";
Blockly.Msg.x_motor_exec = "(0~255)進行";
Blockly.Msg.x_motor_cw = "順時針";
Blockly.Msg.x_motor_acw = "逆時針";
Blockly.Msg.x_motor_set_motor_turns = "轉動";

Blockly.Msg.x_motor_set_motor_ai = "AI 模組馬達驅動初始化";
Blockly.Msg.x_motor_set_motor_turn_ai = "AI 模組設定馬達";
Blockly.Msg.x_motor_set_motor_speed_ai = "以速度";
Blockly.Msg.x_motor_exec_ai = "(0~255)進行";
Blockly.Msg.x_motor_cw_ai = "順時針";
Blockly.Msg.x_motor_acw_ai = "逆時針";
Blockly.Msg.x_motor_set_motor_turns_ai = "轉動";

/*
  _     _____ ____    __  __       _        _      
 | |   | ____|  _ \  |  \/  | __ _| |_ _ __(_)_  __
 | |   |  _| | | | | | |\/| |/ _` | __| '__| \ \/ /
 | |___| |___| |_| | | |  | | (_| | |_| |  | |>  < 
 |_____|_____|____/  |_|  |_|\__,_|\__|_|  |_/_/\_\

*/

Blockly.Msg.x_led_matrix_setup_ai = "AI 模組 LED 燈屏模組 (6×6) 初始化設定";
Blockly.Msg.x_led_matrix_setup_ai_set_bright_1 = "設定燈屏亮度為:";
Blockly.Msg.x_led_matrix_setup_ai_set_bright_range = "(亮度範圍: 0~255)";
Blockly.Msg.x_led_matrix_width_ai_set_brightness_1 = "設定燈屏亮度為:";

Blockly.Msg.x_led_matrix_width_ai_x = "列:";
Blockly.Msg.x_led_matrix_width_ai_y = "行:";
Blockly.Msg.x_led_matrix_width_ai = "寬:";
Blockly.Msg.x_led_matrix_height_ai = "高:";
Blockly.Msg.x_led_matrix_color_ai = "顏色";
Blockly.Msg.x_led_matrix_draw_title_ai = "AI 模組 LED 燈屏模組";

Blockly.Msg.x_led_matrix_draw_pixel_ai = "繪製點";
Blockly.Msg.x_led_matrix_draw_rect_ai = "繪製矩形";

Blockly.Msg.x_led_matrix_parameter_color_ai = "顏色:";
Blockly.Msg.x_led_matrix_parameter_coord_ai = "座標:";
Blockly.Msg.x_led_matrix_parameter_size_ai = "尺寸:";

Blockly.Msg.x_led_matrix_show_above_ai = "顯示圖案";
Blockly.Msg.x_led_matrix_clear_all_ai = "清除燈屏";


Blockly.Msg.x_led_matrix_setup_iot = "IoT 模組 LED 燈屏模組 (6×6) 初始化設定";
Blockly.Msg.x_led_matrix_width_iot_x = "列:";
Blockly.Msg.x_led_matrix_width_iot_y = "行:";
Blockly.Msg.x_led_matrix_width_iot = "寬:";
Blockly.Msg.x_led_matrix_height_iot = "高:";
Blockly.Msg.x_led_matrix_color_iot = "顏色";
Blockly.Msg.x_led_matrix_draw_title_iot = "IoT 模組 LED 燈屏模組";
Blockly.Msg.x_led_matrix_setup_iot_set_bright_1 = "設定燈屏亮度為:";
Blockly.Msg.x_led_matrix_setup_iot_set_bright_range = "(亮度範圍: 0~255)";
Blockly.Msg.x_led_matrix_width_iot_set_brightness_1 = "設定燈屏亮度為:";
Blockly.Msg.x_led_matrix_setup_iot_io = "設定燈屏 IO 爲:";

Blockly.Msg.x_led_matrix_draw_pixel_iot = "繪製點";

Blockly.Msg.x_led_matrix_parameter_color_iot = "顏色:";
Blockly.Msg.x_led_matrix_parameter_coord_iot = "座標:";

Blockly.Msg.x_led_matrix_show_above_iot = "IoT 模組 LED 燈屏模組顯示生效";


/*
   ____                      ____           _ 
  / ___| __ _ _ __ ___   ___|  _ \ __ _  __| |
 | |  _ / _` | '_ ` _ \ / _ \ |_) / _` |/ _` |
 | |_| | (_| | | | | | |  __/  __/ (_| | (_| |
  \____|\__,_|_| |_| |_|\___|_|   \__,_|\__,_|

*/

Blockly.Msg.x_gamepad_read_button_first_text_iot = "當遊戲手柄上的按鍵";
Blockly.Msg.x_gamepad_read_button_first_text_pressed_iot = " 按下時";
Blockly.Msg.x_gamepad_read_button_first_text_released_iot = " 鬆開時";
Blockly.Msg.x_gamepad_read_button_status_first_text_iot = "獲取遊戲手柄上按鍵";
Blockly.Msg.x_gamepad_read_button_status_after_text_iot = "的電平值";
Blockly.Msg.x_gamepad_read_joystick_read_iot = "獲取遊戲手柄上搖桿";
Blockly.Msg.x_gamepad_read_joystick_read_iot_x = "X軸方向";
Blockly.Msg.x_gamepad_read_joystick_read_iot_y = "Y軸方向 ";
Blockly.Msg.x_gamepad_read_joystick_read_after_iot = "的類比數值 (範圍: 0~1023)";
Blockly.Msg.x_gamepad_read_joystick_when_iot = "當遊戲手柄上的搖桿";
Blockly.Msg.x_gamepad_read_joystick_when_top_iot = "向上推時";
Blockly.Msg.x_gamepad_read_joystick_when_bottom_iot = "向下推時";
Blockly.Msg.x_gamepad_read_joystick_when_left_iot = "向左推時";
Blockly.Msg.x_gamepad_read_joystick_when_right_iot = "向右推時";
Blockly.Msg.x_gamepad_read_joystick_when_not_iot = "沒有動時";


Blockly.Msg.x_gamepad_read_button_first_text_ai = "當遊戲手柄上的按鍵";
Blockly.Msg.x_gamepad_read_button_first_text_pressed_ai = " 按下時";
Blockly.Msg.x_gamepad_read_button_first_text_released_ai = " 鬆開時";
Blockly.Msg.x_gamepad_read_button_status_first_text_ai = "獲取遊戲手柄上按鍵";
Blockly.Msg.x_gamepad_read_button_status_after_text_ai = "的電平值";
Blockly.Msg.x_gamepad_read_joystick_read_ai = "獲取遊戲手柄上搖桿";
Blockly.Msg.x_gamepad_read_joystick_read_ai_x = "X軸方向";
Blockly.Msg.x_gamepad_read_joystick_read_ai_y = "Y軸方向 ";
Blockly.Msg.x_gamepad_read_joystick_read_after_ai = "的類比數值 (範圍: 0~1023)";
Blockly.Msg.x_gamepad_read_joystick_when_ai = "當遊戲手柄上的搖桿";
Blockly.Msg.x_gamepad_read_joystick_when_top_ai = "向上推時";
Blockly.Msg.x_gamepad_read_joystick_when_bottom_ai = "向下推時";
Blockly.Msg.x_gamepad_read_joystick_when_left_ai = "向左推時";
Blockly.Msg.x_gamepad_read_joystick_when_right_ai = "向右推時";
Blockly.Msg.x_gamepad_read_joystick_when_not_ai = "沒有動時";


/*
     _    ___   ____            _      
    / \  |_ _| | __ )  __ _ ___(_) ___ 
   / _ \  | |  |  _ \ / _` / __| |/ __|
  / ___ \ | |  | |_) | (_| \__ \ | (__ 
 /_/   \_\___| |____/ \__,_|___/_|\___|
*/


Blockly.Msg.ai_basic_button_when = "當按鈕";
Blockly.Msg.ai_basic_pressed = "按下時";
Blockly.Msg.ai_basic_released = "鬆開時";
Blockly.Msg.ai_basic_led_set = "設定";
Blockly.Msg.ai_basic_led_blue = " LED1（左側）";
Blockly.Msg.ai_basic_led_red = "LED2（右側）";
Blockly.Msg.ai_basic_led_on = "點亮";
Blockly.Msg.ai_basic_led_off = "熄滅";

Blockly.Msg.ai_basic_led_analog_set = "設定";
Blockly.Msg.ai_basic_led_analog_led1 = "LED1";
Blockly.Msg.ai_basic_led_analog_led2 = "LED2";
Blockly.Msg.ai_basic_led_analog_brightness_text = "的燈光亮度為";
Blockly.Msg.ai_basic_led_analog_range_text = "(數值範圍: 0~100)";
/*
     _    ___   ___                              ____                              
    / \  |_ _| |_ _|_ __ ___   __ _  __ _  ___  |  _ \ _ __ ___   ___ ___  ___ ___ 
   / _ \  | |   | || '_ ` _ \ / _` |/ _` |/ _ \ | |_) | '__/ _ \ / __/ _ \/ __/ __|
  / ___ \ | |   | || | | | | | (_| | (_| |  __/ |  __/| | | (_) | (_|  __/\__ \__ \
 /_/   \_\___| |___|_| |_| |_|\__,_|\__, |\___| |_|   |_|  \___/ \___\___||___/___/
                                    |___/                                          
*/


Blockly.Msg.image_process_lcd_init = "LCD 螢幕初始化";

Blockly.Msg.image_process_text_let_canvas = "將畫布";
Blockly.Msg.image_process_text_let_canvas_filled_with_color = "鋪滿顏色";
Blockly.Msg.image_process_text_on_canvas = "在畫布";
Blockly.Msg.image_process_text_on_draw = "上繪製";
Blockly.Msg.image_text_on_draw = "繪製";
Blockly.Msg.image_process_text_set_canvas_setup = "設定畫布";

Blockly.Msg.image_process_text_filled = "實心";
Blockly.Msg.image_process_text_stroked = "空心";

Blockly.Msg.image_process_statistical_chart_bar = "條形";
Blockly.Msg.image_process_statistical_chart_broken_line = "折線";
Blockly.Msg.image_process_statistical_chart_sector = "扇形";

Blockly.Msg.image_process_sensor = "傳感器  ";
Blockly.Msg.image_process_temperature = "溫度";
Blockly.Msg.image_process_humidity = "溼度";
Blockly.Msg.image_process_Ray_value = "光線值";
Blockly.Msg.image_process_temperature_range = "範圍  ";
Blockly.Msg.image_process_nothing = "不定義範圍(溫度除外)";

Blockly.Msg.image_process_interface = "介面  ";
Blockly.Msg.ai_speech_recognition_setup_set_english = "英文";
Blockly.Msg.ai_speech_recognition_setup_set_simplified_chinese = "簡體中文";
Blockly.Msg.ai_speech_recognition_setup_set_traditional_chinese = "繁體中文";

Blockly.Msg.image_process_text_start_coord_as = "起始點座標為:";
Blockly.Msg.image_process_text_start_coord = "設定起始點座標:";
Blockly.Msg.image_process_text_end_coord = "設定結束點座標:";
Blockly.Msg.image_process_text_size = "尺寸:";
Blockly.Msg.image_process_text_color = "顏色:";
Blockly.Msg.image_process_background_color = "背景顏色:";
Blockly.Msg.image_process_text_thick = "厚度:";
Blockly.Msg.image_process_text_radius = "半徑:";
Blockly.Msg.image_process_text_content = "內容";

Blockly.Msg.image_process_statistical_chart_content = "獲取需繪圖的數據";
Blockly.Msg.image_process_statistical_chart_y_property = "定義 Y 軸爲";

Blockly.Msg.image_process_pixtovec_text_first = "進行";
Blockly.Msg.image_process_pixtovec_v2p = "矢量轉像素";
Blockly.Msg.image_process_pixtovec_p2v = "像素轉矢量";
Blockly.Msg.image_process_pixtovec_conversion = "轉換";
Blockly.Msg.image_process_color_mode_gray = "灰度模式";
Blockly.Msg.image_process_color_mode_rgb = "彩色模式";
Blockly.Msg.image_process_imgcut_cutting = "進行裁剪處理";
Blockly.Msg.image_process_imgcut_start_coord = "裁剪起始座標:";
Blockly.Msg.image_process_imgcut_size = "裁剪尺寸:";
Blockly.Msg.image_process_img_save = "保存至本地";
Blockly.Msg.image_process_img_save_quality = "設定圖像壓縮質量:";
Blockly.Msg.image_process_color_invert = "進行顏色反轉";
Blockly.Msg.image_process_resize_to = "調整尺寸至";
Blockly.Msg.image_process_color_scheme_convert = "轉換爲";
Blockly.Msg.image_process_color_scheme_bw = "黑白";
Blockly.Msg.image_process_color_scheme_rgb = "彩色";
Blockly.Msg.image_process_draw_cross_title = "上繪製十字標";
Blockly.Msg.image_process_draw_cross_centerpos = "中心座標:";
Blockly.Msg.image_process_draw_cross_length = "十字線延伸長度:";
Blockly.Msg.image_process_draw_cross_thick = "十字線厚度:";
Blockly.Msg.image_process_draw_cross_color = "顏色:";
Blockly.Msg.image_process_draw_arrow_title = "上繪製箭頭";
Blockly.Msg.image_process_draw_arrow_start = "開始座標:";
Blockly.Msg.image_process_draw_arrow_end = "結束座標:";
Blockly.Msg.image_process_draw_arrow_color = "顏色:";
Blockly.Msg.image_process_draw_arrow_thick = "厚度:";
Blockly.Msg.image_process_draw_rectangle_text = "矩形";
Blockly.Msg.image_process_draw_circle_text = "圓形";

Blockly.Msg.image_process_draw_image_title = "上繪製圖片";
Blockly.Msg.image_process_draw_image_title_image_path = "設定圖片文件路徑:";
Blockly.Msg.image_process_draw_image_scale_x = "設定 X 方向的縮放比例:";
Blockly.Msg.image_process_draw_image_scale_y = "設定 Y 方向的縮放比例:";

Blockly.Msg.image_process_draw_circle_text_start = "圓心坐標";
Blockly.Msg.image_process_draw_text_font_size = "字串大小";
Blockly.Msg.image_process_draw_text_if_monospace = "是否等寬字體";
Blockly.Msg.image_process_draw_text = "字串";
Blockly.Msg.image_process_draw_statistical_chart = "統計圖";
Blockly.Msg.image_process_draw_characters = "漢字字符";
Blockly.Msg.image_process_draw_line = "直線";
Blockly.Msg.image_process_create_blank_canvas = "創建空白畫布";
Blockly.Msg.image_process_create_image_canvas = "創建圖像畫布";
Blockly.Msg.image_process_create_image_canvas_path = "圖像路徑: ";
Blockly.Msg.image_process_show_canvas = "顯示畫布";
Blockly.Msg.image_process_clear_canvas_1 = "清除畫布";
Blockly.Msg.image_process_clear_canvas_2 = "中的所有內容";
Blockly.Msg.image_process_set_lcd_rotation = "將 LCD 螢幕方向旋轉至";
Blockly.Msg.image_process_set_lcd_mirror_flip = "將 LCD 螢幕進行鏡面翻轉";
Blockly.Msg.image_process_set_filled_screen_color = "將 LCD 螢幕填充顏色爲";
Blockly.Msg.image_process_set_filled_screen_color_red = "紅色";
Blockly.Msg.image_process_set_filled_screen_color_green = "綠色";
Blockly.Msg.image_process_set_filled_screen_color_blue = "藍色";
Blockly.Msg.image_process_set_filled_screen_color_purple = "紫色";
Blockly.Msg.image_process_set_filled_screen_color_cyan = "青色";
Blockly.Msg.image_process_set_filled_screen_color_orange = "橙色";
Blockly.Msg.image_process_set_filled_screen_color_yellow = "黃色";
Blockly.Msg.image_process_set_filled_screen_color_black = "黑色";
Blockly.Msg.image_process_set_filled_screen_color_white = "白色";
Blockly.Msg.image_process_clear_lcd = "清除螢幕";
Blockly.Msg.image_process_rgb_r = "紅";
Blockly.Msg.image_process_rgb_g = "綠";
Blockly.Msg.image_process_rgb_b = "藍";
Blockly.Msg.image_process_xy_x = "X";
Blockly.Msg.image_process_xy_y = "Y";
Blockly.Msg.image_process_wh_width = "寬";
Blockly.Msg.image_process_wh_height = "高";
Blockly.Msg.image_process_lcd_show_text = "在 LCD 螢幕上顯示字串";
Blockly.Msg.image_process_lcd_show_text_color = "字串顏色";
Blockly.Msg.image_process_lcd_show_text_bg_color = "字串背景顏色";
Blockly.Msg.image_process_lcd_show_text_color_red = "紅色";
Blockly.Msg.image_process_lcd_show_text_color_green = "綠色";
Blockly.Msg.image_process_lcd_show_text_color_blue = "藍色";
Blockly.Msg.image_process_lcd_show_text_color_purple = "紫色";
Blockly.Msg.image_process_lcd_show_text_color_cyan = "青色";
Blockly.Msg.image_process_lcd_show_text_color_orange = "橙色";
Blockly.Msg.image_process_lcd_show_text_color_yellow = "黃色";
Blockly.Msg.image_process_lcd_show_text_color_black = "黑色";
Blockly.Msg.image_process_lcd_show_text_color_white = "白色";
Blockly.Msg.image_process_get_statistics_to_canvas = "獲取對畫布";
Blockly.Msg.image_process_get_statistics_get_analysis = "進行顏色通道信息分析的結果";
Blockly.Msg.image_process_get_statistics_start_coord = "設定分析區域的起始座標:";
Blockly.Msg.image_process_get_statistics_size = "設定分析區域的尺寸:";
Blockly.Msg.image_process_get_statistics_boxes = "設定直方圖通道的箱數:";
Blockly.Msg.image_process_lab_rgb_conversion_exec = "執行顏色制式轉換";
Blockly.Msg.image_process_lab_rgb_conversion_torgb = "LAB 轉 RGB";
Blockly.Msg.image_process_lab_rgb_conversion_tolab = "RGB 轉 LAB";
Blockly.Msg.image_process_lab_rgb_conversion_tuple = "設定要轉換的顏色元組爲:";
Blockly.Msg.image_process_rgb_grayscale_conversion_exec = "執行顏色制式轉換";
Blockly.Msg.image_process_rgb_grayscale_conversion_torgb = "灰度轉 RGB";
Blockly.Msg.image_process_rgb_grayscale_conversion_togray = "RGB 轉灰度";
Blockly.Msg.image_process_rgb_grayscale_conversion_set = "設定要轉換的顏色元組或灰度值爲:";



/*
     _    ___    ____                               
    / \  |_ _|  / ___|__ _ _ __ ___   ___ _ __ __ _ 
   / _ \  | |  | |   / _` | '_ ` _ \ / _ \ '__/ _` |
  / ___ \ | |  | |__| (_| | | | | | |  __/ | | (_| |
 /_/   \_\___|  \____\__,_|_| |_| |_|\___|_|  \__,_|

*/


Blockly.Msg.ai_camera_camera_init = "相機初始化";
Blockly.Msg.ai_camera_camera_set_size = "設定捕捉影像的尺寸爲:";

Blockly.Msg.ai_camera_camera_fit_set = "設定相機捕捉的畫面";
Blockly.Msg.ai_camera_camera_fit_to = "的尺寸為";
Blockly.Msg.ai_camera_camera_fit_1 = "LCD 螢幕 (240*240px)";
Blockly.Msg.ai_camera_camera_fit_2 = "用於 YOLO 模型推理 (224*224px)";

Blockly.Msg.ai_camera_camera_color_mode = "設定捕捉的影像顏色模式爲:";
Blockly.Msg.ai_camera_camera_color_mode_rgb = "彩色";
Blockly.Msg.ai_camera_camera_color_mode_bw = "黑白";
Blockly.Msg.ai_camera_windowing_resize = "將相機捕捉到的圖像尺寸調整至";
Blockly.Msg.ai_camera_windowing_w = "寬:";
Blockly.Msg.ai_camera_windowing_h = "高:";
Blockly.Msg.ai_camera_windowing_unit = " (單位: px)";
Blockly.Msg.ai_camera_snapshot = "獲取相機捕捉的圖像";
Blockly.Msg.ai_camera_enable = "啓用";
Blockly.Msg.ai_camera_disable = "關閉";
Blockly.Msg.ai_camera_set_vflip = "設定相機圖像垂直翻轉";
Blockly.Msg.ai_camera_set_hmirror = "設定相機圖像水平鏡像";
Blockly.Msg.ai_camera_set_auto_whitebal = "設定相機圖像自動白平衡";
Blockly.Msg.ai_camera_set_auto_gain = "設定相機圖像自動增益";
Blockly.Msg.ai_camera_set_auto_exposure = "設定相機圖像自動曝光";
Blockly.Msg.ai_camera_set_contrast_to_value = "設定相機圖像對比度爲:";
Blockly.Msg.ai_camera_set_brightness_to_value = "設定相機圖像亮度爲:";
Blockly.Msg.ai_camera_set_saturation_value = "設定相機圖像色彩飽和度爲:";
Blockly.Msg.ai_camera_set_range = "（範圍: -3至3）";

Blockly.Msg.ai_camera_set_lens_corr = "廣角鏡頭畫面糾正";

Blockly.Msg.ai_camera_bcs_set_text = "設定相機圖像的";
Blockly.Msg.ai_camera_bcs_contrast = "對比度";
Blockly.Msg.ai_camera_bcs_brightness = "亮度";
Blockly.Msg.ai_camera_bcs_saturation = "色彩飽和度";
Blockly.Msg.ai_camera_bcs_as = "爲";
Blockly.Msg.ai_camera_bcs_set_text_2 = "設定相機圖像";
Blockly.Msg.ai_camera_bcs_vflip = "垂直翻轉";
Blockly.Msg.ai_camera_bcs_hmirror = "水平鏡像";
Blockly.Msg.ai_camera_bcs_wb = "自動白平衡";
Blockly.Msg.ai_camera_bcs_g = "自動增益";
Blockly.Msg.ai_camera_bcs_e = "自動曝光";
Blockly.Msg.ai_camera_bcs_as_2 = "爲";
Blockly.Msg.ai_camera_bcs_status = "狀態";


/*
     _    ___  __     ___     _             
    / \  |_ _| \ \   / (_)___(_) ___  _ __  
   / _ \  | |   \ \ / /| / __| |/ _ \| '_ \ 
  / ___ \ | |    \ V / | \__ \ | (_) | | | |
 /_/   \_\___|    \_/  |_|___/_|\___/|_| |_|
                                            
*/


Blockly.Msg.ai_vision_get_canvas = "獲取畫布";
Blockly.Msg.ai_vision_from_canvas = "從畫布";
Blockly.Msg.ai_vision_from = "從";

Blockly.Msg.ai_vision_color_analyze_get_result = "中指定區域的顏色分析結果 (RGB)";
Blockly.Msg.ai_vision_color_analyze_start_coord = "設定分析區域的起始座標:";
Blockly.Msg.ai_vision_color_analyze_size = "設定分析區域的尺寸:";
Blockly.Msg.ai_vision_find_blobs_color_region = "尋找指定的顏色色塊";
Blockly.Msg.ai_vision_find_blobs_color_threshold = "設定要追蹤的顏色閾值:";
Blockly.Msg.ai_vision_find_blobs_start_coord = "設定檢測區域的起始座標:";
Blockly.Msg.ai_vision_find_blobs_size = "設定檢測區域的尺寸:";
Blockly.Msg.ai_vision_find_blobs_region_threshold = "設定邊界框區域閾值";
Blockly.Msg.ai_vision_find_blobs_pixel_threshold = "設定像素數閾值";
Blockly.Msg.ai_vision_find_blobs_filtered_region = "是否合併所有沒有被過濾掉的色塊 ";
Blockly.Msg.ai_vision_get_blobs_result = "獲取追蹤指定顏色的識別結果";
Blockly.Msg.ai_vision_detection_box_x = "檢測框的 X 軸座標";
Blockly.Msg.ai_vision_detection_box_y = "檢測框的 Y 軸座標";
Blockly.Msg.ai_vision_detection_box_width = "檢測框的寬度";
Blockly.Msg.ai_vision_detection_box_height = "檢測框的高度";
Blockly.Msg.ai_vision_detection_box_pixels = "屬於色塊一部分的畫素數量";
Blockly.Msg.ai_vision_detection_box_cx = "檢測框的中心點 X 軸座標";
Blockly.Msg.ai_vision_detection_box_cy = "檢測框的中心點 Y 軸座標";
Blockly.Msg.ai_vision_detection_box_degree = "檢測框的旋轉角度";
Blockly.Msg.ai_vision_detection_box_total = "總數量";
Blockly.Msg.ai_vision_find_blobs_margin = "邊界矩形的大小";
Blockly.Msg.ai_vision_detection_color_threshold_set = "獲取用於顏色追蹤的預設顏色:";
Blockly.Msg.ai_vision_detection_color_threshold_set_black = "黑色";
Blockly.Msg.ai_vision_detection_color_threshold_set_white = "白色";
Blockly.Msg.ai_vision_detection_color_threshold_set_red = "亮紅色";
Blockly.Msg.ai_vision_detection_color_threshold_set_green = "綠色";
Blockly.Msg.ai_vision_detection_color_threshold_set_blue = "浅藍色";
Blockly.Msg.ai_vision_detection_color_threshold_set_orange = "橘色";

Blockly.Msg.ai_vision_qrcode_detected_result = "中 QR 碼的檢測結果";
Blockly.Msg.ai_vision_apriltag_detected_result = "中 AprilTag 的檢測結果";
Blockly.Msg.ai_vision_datamatrices_detected_result = "中數據矩陣 (Data Matrix) 的檢測結果";
Blockly.Msg.ai_vision_barcode_detected_result = "中條形碼的檢測結果";

Blockly.Msg.ai_vision_qrcode_get_result = "獲取檢測 QR 碼的";
Blockly.Msg.ai_vision_apriltag_get_result = "獲取檢測 AprilTag 的";
Blockly.Msg.ai_vision_data_matrices_get_result = "獲取檢測數據矩陣 (Data Matrix) 的";
Blockly.Msg.ai_vision_barcode_matrices_get_result = "獲取檢測條形碼的";

Blockly.Msg.ai_vision_pattern_detection_content = "源文本";
Blockly.Msg.ai_vision_pattern_detection_type = "數據類型";
Blockly.Msg.ai_vision_pattern_detection_x = "邊界框的 X 軸座標";
Blockly.Msg.ai_vision_pattern_detection_y = "邊界框的 Y 軸座標";
Blockly.Msg.ai_vision_pattern_detection_w = "邊界框的寬度";
Blockly.Msg.ai_vision_pattern_detection_h = "邊界框的高度";
Blockly.Msg.ai_vision_pattern_detection_type_id = "數字 ID";
Blockly.Msg.ai_vision_pattern_detection_type_family = "數字家庭";
Blockly.Msg.ai_vision_pattern_detection_rows = "行數";
Blockly.Msg.ai_vision_pattern_detection_cols = "列數";
Blockly.Msg.ai_vision_pattern_detection_can_tolerate_count = "所能容納的字符數量";
Blockly.Msg.ai_vision_pattern_detection_can_not_tolerate_count = "未使用的字符數量";

Blockly.Msg.ai_vision_find_circle = "中尋找圓形";
Blockly.Msg.ai_vision_find_circle_start_coord = "設定檢測區域的起始座標:";
Blockly.Msg.ai_vision_find_circle_region_size = "設定檢測區域的尺寸:";
Blockly.Msg.ai_vision_find_circle_hoffman_threshold = "設定從霍夫變換中監測到圓的閾值:";
Blockly.Msg.ai_vision_find_circle_merge_x = "設定所檢測的圓的合併 (x):";
Blockly.Msg.ai_vision_find_circle_merge_y = "設定所檢測的圓的合併 (y):";
Blockly.Msg.ai_vision_find_circle_merge_r = "設定所檢測的圓的合併 (r):";
Blockly.Msg.ai_vision_find_circle_min_radius = "設定檢測到的最小圓半徑:";
Blockly.Msg.ai_vision_find_circle_max_radius = "設定檢測到的最大圓半徑:";
Blockly.Msg.ai_vision_find_circle_step_radius = "設定逐步檢測半徑:";
Blockly.Msg.ai_vision_find_circle_detected_result = "獲取尋找圓形的結果";
Blockly.Msg.ai_vision_find_circle_detected_x = "檢測到圓的 X 軸座標";
Blockly.Msg.ai_vision_find_circle_detected_y = "檢測到圓的 Y 軸座標";
Blockly.Msg.ai_vision_find_circle_detected_radius = "檢測到圓的半徑";


Blockly.Msg.ai_vision_find_line = "中尋找直線";
Blockly.Msg.ai_vision_find_line_start_coord = "設定檢測區域的起始座標:";
Blockly.Msg.ai_vision_find_line_size = "設定檢測區域的尺寸:";
Blockly.Msg.ai_vision_find_line_hoffman_threshold = "設定從霍夫變換中監測到直線的閾值:";
Blockly.Msg.ai_vision_find_line_merge_theta = "設定所監測的直線的合併值 (theta):";
Blockly.Msg.ai_vision_find_line_merge_rho = "設定所監測的直線的合併值 (rho):";
Blockly.Msg.ai_vision_find_line_detected_result = "獲取尋找直線的結果";
Blockly.Msg.ai_vision_find_line_detected_start_x = "檢測到直線起始點的 X 軸座標";
Blockly.Msg.ai_vision_find_line_detected_start_y = "檢測到直線起始點的 Y 軸座標";
Blockly.Msg.ai_vision_find_line_detected_end_x = "檢測到直線結束點的 X 軸座標";
Blockly.Msg.ai_vision_find_line_detected_end_y = "檢測到直線結束點的 Y 軸座標";
Blockly.Msg.ai_vision_find_line_detected_length = "檢測到直線的長度";
Blockly.Msg.ai_vision_find_line_detected_angle = "檢測到直線的角度";

Blockly.Msg.ai_vision_find_rect = "中尋找矩形";
Blockly.Msg.ai_vision_find_rect_start_coord = "設定檢測區域的起始座標:";
Blockly.Msg.ai_vision_find_rect_region_size = "設定檢測區域的尺寸:";
Blockly.Msg.ai_vision_find_rect_bounding_threshold = "設定邊界閾值大小:";
Blockly.Msg.ai_vision_find_rect_detected_result = "獲取尋找矩形的結果";
Blockly.Msg.ai_vision_find_rect_detected_tuple = "檢測到矩形的座標及尺寸元組";
Blockly.Msg.ai_vision_find_rect_detected_corners = "檢測到矩形的四個角的座標位置";
Blockly.Msg.ai_vision_find_rect_detected_x = "檢測到矩形的起始點的 X 軸座標";
Blockly.Msg.ai_vision_find_rect_detected_y = "檢測到矩形的起始點的 Y 軸座標";
Blockly.Msg.ai_vision_find_rect_detected_w = "檢測到矩形的寬度";
Blockly.Msg.ai_vision_find_rect_detected_h = "檢測到矩形的高度";

Blockly.Msg.ai_vision_get_histogram_get = "獲取從畫布";
Blockly.Msg.ai_vision_get_histogram_compute = "中進行標準化直方圖運算的結果";
Blockly.Msg.ai_vision_get_histogram_region = "設定顏色追蹤區域範圍:";
Blockly.Msg.ai_vision_get_histogram_region_xy = "區域座標:";
Blockly.Msg.ai_vision_get_histogram_region_wh = "區域尺寸:";
Blockly.Msg.ai_vision_get_histogram_details_1 = "從直方圖計算結果";
Blockly.Msg.ai_vision_get_histogram_details_get = "獲取直方圖頻道的 CDF 計算值 (%)";


Blockly.Msg.ai_vision_get_histogram_percentile_1 = "從直方圖計算結果獲取的百分比值中";
Blockly.Msg.ai_vision_get_histogram_percentile_2 = "獲取";
Blockly.Msg.ai_vision_get_histogram_percentile_3 = "灰度百分比值";
Blockly.Msg.ai_vision_get_histogram_percentile_4 = "RGB565 LAB 的L通道的百分比值";
Blockly.Msg.ai_vision_get_histogram_percentile_5 = "RGB565 LAB 的A通道的百分比值";
Blockly.Msg.ai_vision_get_histogram_percentile_6 = "RGB565 LAB 的B通道的百分比值";



/*
     _    ___   __  __ _                      _                      
    / \  |_ _| |  \/  (_) ___ _ __ ___  _ __ | |__   ___  _ __   ___ 
   / _ \  | |  | |\/| | |/ __| '__/ _ \| '_ \| '_ \ / _ \| '_ \ / _ \
  / ___ \ | |  | |  | | | (__| | | (_) | |_) | | | | (_) | | | |  __/
 /_/   \_\___| |_|  |_|_|\___|_|  \___/| .__/|_| |_|\___/|_| |_|\___|
                                       |_|                           
 */


Blockly.Msg.ai_microphone_init = "咪高峰初始化";
Blockly.Msg.ai_microphone_start_spectrum_analyze = "開始讀取音頻頻譜";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result = "獲取咪高峰採集的音頻頻譜";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_1 = "低音 1";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_2 = "低音 2";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_3 = "中低音 1";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_4 = "中低音 2";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_5 = "中高音 1";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_6 = "中高音 2";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_7 = "高音 1";
Blockly.Msg.ai_microphone_get_spectrum_analyze_result_8 = "高音 2";


/*
     _    ___      _             _ _       
    / \  |_ _|    / \  _   _  __| (_) ___  
   / _ \  | |    / _ \| | | |/ _` | |/ _ \ 
  / ___ \ | |   / ___ \ |_| | (_| | | (_) |
 /_/   \_\___| /_/   \_\__,_|\__,_|_|\___/
*/


Blockly.Msg.ai_audio_play_music_file = "播放音訊檔案";
Blockly.Msg.ai_audio_play_music_file_set_vol = "設定音量爲:";
Blockly.Msg.ai_audio_play_music_file_set_file_path = "音訊檔案路徑:";
Blockly.Msg.ai_audio_get_play_status = "獲取音訊檔案播放狀態";
Blockly.Msg.ai_audio_end_play = "結束音訊檔案播放";
Blockly.Msg.ai_audio_init = "喇叭初始化";
Blockly.Msg.ai_audio_set_music_vol = "設定音訊文件播放音量爲:";

Blockly.Msg.ai_speech_recognition_setup = "語音識別初始化";
Blockly.Msg.ai_speech_recognition_setup_set_sensi = "設定環境噪音靈敏度為:";
Blockly.Msg.ai_speech_recognition_setup_set_sensi_normal = "正常";
Blockly.Msg.ai_speech_recognition_setup_set_sensi_high = "高";
Blockly.Msg.ai_speech_recognition_setup_set_sensi_ehigh = "很高";
Blockly.Msg.ai_speech_recognition_start_recording = "開始錄製語音片段";
Blockly.Msg.ai_speech_recognition_start_recording_clip_text = "設定要識別的語音片段個數為:";
Blockly.Msg.ai_speech_recognition_start_recording_clip_note = "(不得超過 6 個片段)";
Blockly.Msg.ai_speech_recognition_start_recording_take_text = "設定每個片段錄製的次數為:";
Blockly.Msg.ai_speech_recognition_start_recording_take_note = "(不得超過 4 次)";
Blockly.Msg.ai_speech_recognition_start_recognizing = "開始進行語音識別";
Blockly.Msg.ai_speech_recognition_any_result_text = "當語音識別獲得任意結果的時候";
Blockly.Msg.ai_speech_recognition_any_result_text_do = "執行";
Blockly.Msg.ai_speech_recognition_get_result = "語音識別的結果為第 ";
Blockly.Msg.ai_speech_recognition_get_result_after = "條片段";



/*
     _    ___  __     ___     _            
    / \  |_ _| \ \   / (_) __| | ___  ___  
   / _ \  | |   \ \ / /| |/ _` |/ _ \/ _ \ 
  / ___ \ | |    \ V / | | (_| |  __/ (_) |
 /_/   \_\___|    \_/  |_|\__,_|\___|\___/ 
*/


Blockly.Msg.ai_video_start_recording = "開始錄製影片";
Blockly.Msg.ai_video_start_recording_file_path = "設定影片保存路徑:";
Blockly.Msg.ai_video_start_recording_width = "設定影片寬度 (px):";
Blockly.Msg.ai_video_start_recording_height = "設定影片高度 (px):";
Blockly.Msg.ai_video_to_canvas = "對畫布";
Blockly.Msg.ai_video_record = "進行錄製";
Blockly.Msg.ai_video_stop_recording = "停止錄製影片";
Blockly.Msg.ai_video_play_video = "播放影片檔案";
Blockly.Msg.ai_video_play_video_2 = "註：僅支持尺寸爲 320*240 的影片";
Blockly.Msg.ai_video_play_video_file_path = "影片路徑:";
Blockly.Msg.ai_video_stop_video_playing = "結束影片檔案播放";
Blockly.Msg.ai_video_get_video_playing_status = "獲取影片播放的狀態";


/*
     _    ___   __  __           _      _     
    / \  |_ _| |  \/  | ___   __| | ___| |___ 
   / _ \  | |  | |\/| |/ _ \ / _` |/ _ \ / __|
  / ___ \ | |  | |  | | (_) | (_| |  __/ \__ \
 /_/   \_\___| |_|  |_|\___/ \__,_|\___|_|___/
*/


Blockly.Msg.ai_models_from = "從";

Blockly.Msg.ai_models_init_title = "加載並初始化預設模型:";
Blockly.Msg.ai_models_init_hand_written_model = "手寫數字識別模型";
Blockly.Msg.ai_models_init_object_model = "常見物體檢測模型";
Blockly.Msg.ai_models_init_face_model = "人臉檢測模型";
Blockly.Msg.ai_models_init_source = "設定要檢測的圖像源爲:";
Blockly.Msg.ai_models_hand_written_model_result = "獲取手寫數字檢測模型的檢測結果";
Blockly.Msg.ai_models_hand_written_model_number = "獲取當前檢測到的數字 (0至9)";
Blockly.Msg.ai_models_hand_written_model_confidence = "獲取當前檢測到的數字的置信度 (%)";
Blockly.Msg.ai_models_object_model_if = "檢測到了任意常見物體";
Blockly.Msg.ai_models_object_model_get = "獲取檢測到的常見物體的";
Blockly.Msg.ai_models_object_model_name = "物體名稱";
Blockly.Msg.ai_models_object_model_x = "檢測框的 X 軸座標";
Blockly.Msg.ai_models_object_model_y = "檢測框的 Y 軸座標";
Blockly.Msg.ai_models_object_model_w = "檢測框的寬度";
Blockly.Msg.ai_models_object_model_h = "檢測框的高度";
Blockly.Msg.ai_models_object_model_count = "物體數量";
Blockly.Msg.ai_models_object_model_index = "出現順序";
Blockly.Msg.ai_models_object_model_confidence = "置信度";
Blockly.Msg.ai_models_face_model_if = "檢測到了人臉";
Blockly.Msg.ai_models_face_model_get = "獲取檢測到的人臉的";
Blockly.Msg.ai_models_face_model_x = "檢測框的 X 軸座標";
Blockly.Msg.ai_models_face_model_y = "檢測框的 Y 軸座標";
Blockly.Msg.ai_models_face_model_w = "檢測框的寬度";
Blockly.Msg.ai_models_face_model_h = "檢測框的高度";
Blockly.Msg.ai_models_face_model_count = "數量";
Blockly.Msg.ai_models_face_model_index = "出現順序";
Blockly.Msg.ai_models_face_model_confidence = "置信度";
Blockly.Msg.ai_model_customized_init_setup_definition = "加載自定義模型前的設定";
Blockly.Msg.ai_models_customized_init_setup_title = "加載並初始化客製化模型 (TinyYOLOv2)";
Blockly.Msg.ai_models_customized_init_setup_path = "模型文件路徑:";
Blockly.Msg.ai_models_customized_init_setup_source = "設定要識別的圖像源爲:";
Blockly.Msg.ai_models_customized_init_setup_name = "設定模型識別物體的名稱:";
Blockly.Msg.ai_models_customized_if_got = "識別到了客製化模型的物件";
Blockly.Msg.ai_models_customized_get_result_any = "獲取識別到客製化模型結果的";
Blockly.Msg.ai_models_customized_get_result_name = "名稱";
Blockly.Msg.ai_models_customized_get_result_x = "檢測框的 X 軸座標";
Blockly.Msg.ai_models_customized_get_result_y = "檢測框的 Y 軸座標";
Blockly.Msg.ai_models_customized_get_result_w = "檢測框的寬度";
Blockly.Msg.ai_models_customized_get_result_h = "檢測框的高度";
Blockly.Msg.ai_models_customized_get_result_count = "數量";
Blockly.Msg.ai_models_customized_get_result_index = "出現順序";
Blockly.Msg.ai_models_customized_get_result_confidence = "置信度";
Blockly.Msg.ai_model_face = "自定義初始化人臉辨識模型";
Blockly.Msg.ai_model_face_name = "設定模型識別人臉的名稱：";

Blockly.Msg.ai_model_class = "自定義初始化物體辨識模型";

Blockly.Msg.ai_model_class_name = "設定模型識別物體的名稱：";
Blockly.Msg.ai_model_getface = "識別到了人臉模型的對象";
Blockly.Msg.ai_model_getclass = "識別到了物体模型的對象";

Blockly.Msg.ai_models_object_model_x_center = "檢測框中心點的 X 軸座標";
Blockly.Msg.ai_models_object_model_y_center = "檢測框中心點的 Y 軸座標";
Blockly.Msg.ai_models_face_model_x_center = "檢測框中心點的 X 軸座標";
Blockly.Msg.ai_models_face_model_y_center = "檢測框中心點的 Y 軸座標";
Blockly.Msg.ai_models_customized_get_result_x_center = "檢測框中心點的 X 軸座標";
Blockly.Msg.ai_models_customized_get_result_y_center = "檢測框中心點的 Y 軸座標";


/*
     _    ___   ____            _                 
    / \  |_ _| / ___| _   _ ___| |_ ___ _ __ ___  
   / _ \  | |  \___ \| | | / __| __/ _ \ '_ ` _ \ 
  / ___ \ | |   ___) | |_| \__ \ ||  __/ | | | | |
 /_/   \_\___| |____/ \__, |___/\__\___|_| |_| |_|
                      |___/                       
*/


Blockly.Msg.ai_system_restart = "重啓系統";
Blockly.Msg.ai_system_enable_gc = "啓動記憶體回收";
Blockly.Msg.ai_system_run_python_code = "運行 Python 程式";
Blockly.Msg.ai_system_run_python_code_file_path = "程式路徑爲:";



/* 
     _    ___  __        ___ _____ _ 
    / \  |_ _| \ \      / (_)  ___(_)
   / _ \  | |   \ \ /\ / /| | |_  | |
  / ___ \ | |    \ V  V / | |  _| | |
 /_/   \_\___|    \_/\_/  |_|_|   |_|
                                     
*/

Blockly.Msg.ai_wifi_set_wifi = "設定 Wi-Fi 為";
Blockly.Msg.ai_wifi_enabled = "啟用狀態";
Blockly.Msg.ai_wifi_disabled = "禁用狀態";
Blockly.Msg.ai_wifi_start_wifi_scan = "開始掃描附近 Wi-Fi 熱點";
Blockly.Msg.ai_wifi_wifi_scan_result = "獲取 Wi-Fi 掃描的結果為陣列形式";
Blockly.Msg.ai_wifi_connect_wifi = "連線至 Wi-Fi 網路";
Blockly.Msg.ai_wifi_connect_wifi_ssid = "網路名稱 (SSID):";
Blockly.Msg.ai_wifi_connect_wifi_pass = "網路密碼:";
Blockly.Msg.ai_wifi_get_connection_status = "獲取 Wi-Fi 連線的狀態";
Blockly.Msg.ai_wifi_get_wifi_info = "獲取 Wi-Fi 連線的裝置資訊:";
Blockly.Msg.ai_wifi_get_wifi_info_name = "熱點名稱";
Blockly.Msg.ai_wifi_get_wifi_info_ip = "IP 地址";
Blockly.Msg.ai_wifi_get_wifi_info_dns = "DNS 地址";
Blockly.Msg.ai_wifi_get_wifi_info_mac = "MAC 地址";


/*
  _   _ _ _                             _        ____                            
 | | | | | |_ _ __ __ _ ___  ___  _ __ (_) ___  / ___|  ___ _ __  ___  ___  _ __ 
 | | | | | __| '__/ _` / __|/ _ \| '_ \| |/ __| \___ \ / _ \ '_ \/ __|/ _ \| '__|
 | |_| | | |_| | | (_| \__ \ (_) | | | | | (__   ___) |  __/ | | \__ \ (_) | |   
  \___/|_|\__|_|  \__,_|___/\___/|_| |_|_|\___| |____/ \___|_| |_|___/\___/|_|   
                                                                                 
*/

Blockly.Msg.third_party_hcsr04_iot = "在 IoT 模組上";
Blockly.Msg.third_party_hcsr04_ai = "在 A.I. 模組上 ";
Blockly.Msg.third_party_hcsr04_setup_title = "初始化 HCSR-04 超聲波感測器";
Blockly.Msg.third_party_hcsr04_trig_pin = "設定 Trig 接腳為 GPIO";
Blockly.Msg.third_party_hcsr04_echo_pin = ", 設定 Echo 接腳為 GPIO";
Blockly.Msg.third_party_hcsr04_read_text = "讀取來自超聲波感測器";
Blockly.Msg.third_party_hcsr04_read_text_after = "的距離檢測數值 (單位: CM)";
Blockly.Msg.Set_Auto_Wrap = "自動換行";


/*
  ____  _     _____ 
 | __ )| |   | ____|
 |  _ \| |   |  _|  
 | |_) | |___| |___ 
 |____/|_____|_____|

*/

Blockly.Msg.esp32_ble_setup_sender_msg = "BLE(低功耗藍牙)";
Blockly.Msg.esp32_ble_setup_sender = "發送端初始化";
Blockly.Msg.esp32_ble_send_data_msg = "BLE 發送數據";
Blockly.Msg.esp32_ble_setup_receiver_msg = "BLE(低功耗藍牙)";
Blockly.Msg.esp32_ble_setup_receiver = "接收端初始化";
Blockly.Msg.esp32_ble_get_data_msg = "獲取從BLE接收的數據";
Blockly.Msg.esp32_ble_sender_connected_msg = "發送端已經被連接";
Blockly.Msg.esp32_ble_receiver_connected_msg = "接收端已經被連接";



/* additional text */

Blockly.Msg.text_additional_delimiter_string = "將字串";
Blockly.Msg.text_additional_delimiter_deli = "使用分隔符:";
Blockly.Msg.text_additional_delimiter_end = "進行拆分並生成陣列";